A recap of Innoventor’s role in the F-35 JSF program.

1. DiversityBusiness.com Winner SBA Award Winner Inc 5000 Winner Top 50 Award Recipient Innoventor®F-35 JSF Program Your Engineering Problem Solver “Outstanding Small Business” at Lockheed Martin

2. Lockheed Martin F-35 JSF

4. Recognition of consecutive successful delivery performance.

7. Forward Fuselage CG Load Bar

8. Detail Wing Assembly Platform (43,000 sq ft)

9. Final Wing Assembly Platform (15,000 sq ft)

10. 5 sets Electronic and Mate Assembly Stands

11. 4 sets Moving Assembly Lines

12. 4 sets Final Check Out Stands

13. 4 sets Paint Cell Dollies

15. The EMAS is a “tooling” system that brings the fuselage sections and wing into alignment.

18. Each station accommodates one aircraft, LRIP utilizes 4-5 systems, full rate will utilize 22 systems.

19. Speed is continuous and fully variable from 1 inch per hour to up to 60 inches per minute.

20. A control system keeps each ALWS in line with the intended path and prevents collision.

24. Locates F-35 in x-y-z for Robotic Painting.

25. Holds extremely tight tolerance on a/c location.

27. F-35 JSF – BF-01 STOVL Innoventor Work Stands

30. Lockheed Martin F-35 JSF Innoventor has a large footprint for the F-35 production for Lockheed Martin.The Latest Techniques for Lean Manufacturing were implemented on all Innoventor production equipment.Lockheed Martin has experienced tremendous labor savings as a result of this equipment.

31. Innoventor, Inc. A Solutions Engineering House 3600 Rider Trail South St. Louis MO 63045 (USA) P 314.785.0900 F 314.785.0044 www.innoventor.net