KYL-600H, the low power data radio is designed to be low cost and high performance radio modem. The new design makes the modem more flexible for different application in various configurations. Basically, this type of modem is SMART enough to be customized to best meet end user’s requirements. Users don’t have to pay the features that never be used in their projects. The following lists its general functionalities of this series.
Specifications of KYL-600H
* Double phase-lock loop, double VCO structure, high stability
* providing many MODEM communication agreements
* metal shell metal, good shielding performance.
* Carrier frequency: VHF/UHF
* Air data rate:1200/2400/4800bps
* Interface: TTL/RS-232/RS-485 selectable
* Modulation: FSK/MSK
* Frequency stability: +-2.5ppm
* Channel spacing: 25 kHz
* Antenna impedance: 50 ohm
* Temperature: -30~+70C
* Supply voltage: 12V
* Size: 96x58x18mm(without radiator)
* Transmission distance can reach 10Km
* Double phase-lock loop, double VCO structure, high stability, providing many MODEM communication agreements.
Passkey Providers and Enabling Portability: FIDO Paris Seminar.pptx
KYL-600H user manual
1. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
KYL-600H Data Radio Modem
KYL-600H
User Manual
Shenzhen KYL Communication Equipment Co., Ltd
Address: Unit 5-7, Building3, Huangdu Square, South of Exhibition Center,Yitian
Road, Futian District, Shenzhen Guangdong China
Tel: +0086-755-83410815
Moble: +0086-15999598114
Fax: +0086-755-83408785
Skype:lxmlosia
Yahoo messenger: losia2012@yahoo.com
MSN: kylcom01.com@hotmail.com
E_mail: sales01@rf-data.com;kyl03losia@gmail.com
Website: http://www.rf-data.com
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
2. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
Before using the product please read the use manual carefully.
Any question in technical, you can contact us.
Tel: +0086-755-83410815.
I: About KYL-600H
KYL-600H
KYL-600H, the data radio module adopt double phase-lock loop,
double VCO structure, high stability TXCO, integration RF and
so on advanced technique; at the same time it use the advanced
rectify fault arithmetic in software. So it has high stability
and reliability. It is the first equipment for the user in
the field of industry control, water conservancy, electric
power, oil field and so on. This product can provide multiple
MODEM communication protocols so that users have more choice.
Of course, we can design according to users’ demands, or we
can provide technique support and second development for users
for free.
II: Features:
1. Specifications:
* Double phase-lock loop, double VCO structure, high stability
* providing many MODEM communication protocols
* Metal shell metal, good shielding performance.
* Carrier frequency: VHF/UHF
* Air data rate: 1200/2400bps
* Interface: TTL/RS-232/RS-485 selectable
* Modulation: FSK/MSK
* Frequency stability: ±2.5ppm
* Channel spacing: 25 kHz
* Antenna impedance: 50 ohm
* Temperature: -30~+70C
* Supply voltage: 12V
* Size: 85x58x16mm (without radiator)
* Transmission distance can reach 12Km
* To adapt different user structure, we can develop various
size modules and offer sufficient technology support for
client use the module and second development for free.
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
3. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
2. receiver:
* Receiving sensibility: ≤-119dBm (more than 12dB SINAD)
* Adjacent channel selectivity: ≥65dB
* Intermodulation rejection: ≥65dB
* Clutter and images rejection: ≥70dB
3. Transmitter:
* RF power: 5W
* Frequency deviation: ≥ 5.0kHz
* Adjacent channel power: ≥70dB
* Transmitting current: ≤1.5A
III: Application of KYL-600H:
KYL-600H
600H:
KYL-600H the data radio module is suitable for:
* AMR Automatic Meter Reading
* Wireless alarm and security systems
* Building automation, security, wireless monitoring and
control of room equipment, Access Control System;
* Wireless data transmission, automatic data collection
system;
* Low power telemetry
* Data radio can be used for Wireless conference voting system;
* Mapping;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF modem can be used for Electronic bus station and
intelligent traffic;
* RF transmitter Wireless electronic display screen and
queuing machine;
* Wireless telemetry Charging for parking, parking lot;
* Wireless modem Automobile inspection and four-wheel
orientation;
* Wireless sensor Industrial wireless remote control and air
conditioning remote controller;
* Data communication used for railway, oil field, dock and
army.
* LED display in thruway and public places
* Wireless RS232/RS485 conversion/connector;
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
4. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
* Point to multi-point wireless network, wireless on-the-spot
bus and automatic data collection system;
IV: How to use the KYL-600H data radio module
KYL-600H
KYL-600H provide RS-232, RS-485 and UART/TTL level interface
port for direct connection with PC, RS485 devices, monolithic
processors and other UART components kinds of applications.
1. Power supply
KYL-600H work with supply voltage+12.0V DC. By using better
ripple factor, KYL-600H transceivers can also share power
supply with other equipment. If possible, a
voltage-stabilizing chip with 12V voltage is more recommended
as the only power supply than switch power supply. But if only
switch power supply available, the jam by switch pulse to the
transceivers should be avoided. In addition, the reliable
grounding must be used if there is other device in the system
equipment. In case of failing to connect with the ground, it
can form its own grounding but must be absolutely separated
from the municipal electric supply. If lower power for lower
power consumption needed, we can design to meet users’
demands.
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
5. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
2. Installation
Installation dimension:
5
4- M
3
16
35 44. 5
4
44. 3 44. 5
98
3. Interface definition:
Pin No. Signal Name Function Level Remarks
1 GND Grounding of power supply
2 A (TXD) A of RS-485(TxD of RS-232)
3 B (RXD) B of RS-485(RxD of RS-232)
4 NC
5 DGND Signal
6 RXD/TTL Receiving data(TTL level)
7 TXD/TTL Transmitting data(TTL level)
8 - - TTL -
9 Test Inside testing
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
6. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
4. The connection schematic diagram of KYL-600H transceivers with terminal
VCC 12V GND 9 1
5. Setting of frequency value, interface rate, and data
value, rate,
format
Before using KYL-600H, users can use our software to setting
frequency value,interface rate and data format.
A. Users can programm any frequency value in the frequency
range. Before ordering, clients need confirm the frequency
range.
B. Users can choose the interface rate according to
requirement.
C. Users can change the data format according to actual
requirement.
6. Supported protocol and Transmit capability
KYL-600H standard transceiver offer transparent protocol to
support various applications and protocols of users. If the
user needs to decrease his cost or ease the workload of terminal
CPU, we can add other specific functions based on the
transparent protocol, such as addressing, data acquisition,
command interpretation, etc.
As using FIFO mode, KYL-600H is able to satisfy user big data
package transmission.
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
7. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
7. Description of Indicator light
a. The red and green lights are on about 50Ms at the same time
after supplying the electricity.
b. The red light is normally on when transmitting data, while
the red light will crush out after ending the data.
c. The green light is normally on when receiving the air signal,
while the green light will crush out after receiving the
air signal.
8. Standard configuration and Antenna configuration
i: Standard configuration:
configuration:
* One KYL-600H radio modem
* one Power supply connector line
* one data connector line
* Helical TNC antennas(about 10cm)
ii: Antenna configuration:
Many appropriative antennas for low power RF modules are
selected for meeting different user antenna configuration.
Please ask our Sales office for further information about the
antenna’s dimension and performance. The main options of
antennas are exterior flagelliform rubber antenna with
helical SMA joint, small osculum antenna, small rod antenna
and elbow antenna. If the user has special demands on antennas,
we can design and produce for them specially.
a. Helical TNC antennas: KYL-ANT-S868-5-TNC
b. Elbow antenna : KYL-ANT-S433L-10-ESMA
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
8. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
c. Small rod antenna: KYL-ANT-S433-4-RSMA
d. Small osculum antenna: KYL-ANT-O433S-300H1.5-SMA
V. Application of KYL-600H Networking
KYL-600H
The communication channel of KYL-600H is half duplex, which
is most suitable for the communication mode of point to
multi-point. Under this mode, one master station must be set,
and all of the rest are slave stations. A unique address is
given to each station. The coordination of communication is
controlled by master station that uses data frames containing
address code to transmit data or command. Slave station will
receive all of the data and command and compare the received
address code with local address code. If they are different,
the data will be deserted without any response. If those
address codes are the same, it means the data is sent to the
local. Slave station will make different responses according
to the transmitted data or command and send back the data of
response. All these jobs must be performed by upper protocol,
and it is assured that there is only one transmitter-receiver
in the state of transmission in the communication network at
any instant moment so as to avoid the cross-interference.
KYL-600H can also be used for point-to- point communication
with easier operation. For the programming of serial port,
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
9. Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.
all you have to do is to remember that its communication mode
is semi duplex while always observing the time sequence of
come-and-go for receiving and transmitting.
V. Technical specification of KYL-600H
* Modulation mode: GFSK/FSK
* Working frequency: VHF/UHF
* Power supply: DC 12V(±10%)
* RF power: ≤5W;
* RF data rate: 1200/2400 (Set before delivery);
* Receive current: <50mA (TTL connect);
* Receive sensitivity: -123dBm (1200bps)
* Transmitting current: <1.5A;
* Sleep current: <1mA;
* Interface data format: 8E1/8N1/8O1;
* Working humidity: 10%~90% relative humidity without condensation;
* Working temperature: -40℃~+80℃( industrial)
* RF Line-of-sight Range: 10km(BER=10-5@9600bps);
12km(BER=10-5@1200bps);
* Size: 85mm*58mm*16mm (without antenna port).
VI. Description of type
KYL-600H-12
KYL-600H-12
Baud Rate
12:1200bps
manufacturer type
24:2400bps
48:4800bps
96:9600bps
192:19200bps
Fax: +0086-755-83408785
+0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com