3. Description
the bike has :
-tail lamp
-intermittent rear lamp
-Exhaust silencer
-new monotransversal suspension
-starter pedal
-front fender
-brake pedal
-foot rest
-helmet
-front fork
-headlight
4. Description
-cover
-Fuel tank
-seat
-shift lever
-Clutch lever
-Handle switch
-speedometer
-tachometer
-temperature sensor
-Brake lever
-throttle grip Note:
-Flashing light front The motorcycle you have
purchased may differ partially
from that shown in the photos.
5. SECURITY AND CONFORT
-Rear suspension:
lubricate joints with the recommended lubricant is lithium based
grease
-Dynamic Damping Control :
This is a system whose origin can be found in the rocker
"Paralever", whose mission was to improve the
transmission of force to the rear wheel.
6. Brakes:
1-Make the lever and the brake pedal work properly
2-check the brake fluid level
3 - Check the disc five tapes
Note: when you sit on the brake lever is a feeling
spongy signal system failure brakes .visite a Yamaha
dealer immediately to make immediate repairs.
7. CONTROL FUNCTIONS
-switch : controls the ignition and lighting system
measuring engine temperature
This gauge indicates the temperature of cooling
when the main switch is ON
8. • indicator Lights
1. flag indicator light turn "TURN"
this light comes on intermittently to be turning the switch to
"ON"
2. Neutral indicator light "NEUTRAL"
Lights when the transmission is in neutral
3. high beam indicator light
when using the headlight high beam this light comes on
4. Oil warning light "OIL"
Lights when the oil level is low
9. speedometer
the odometer and trip meter are located within the
speedometer. use the odometer to calculate how much content
can go with fuel before check empty.
tachometer
this model has an electric tachometer so
that the driver can monitor the engine
speed has.
10. instructions for operating
having Read the entire owners manual
note these instructions What you do
before starting a motorcycle trip is very
important to
well will determine whether your
destination. Before leaving, a safe driver
ensures:
1. Use the proper attire. Driving with
permission, must wear a helmet and
eye protection.
2. Familiar with the motorcycle.
3. Check the motorcycle equipment.
4. Being a responsible driver.
5. properly follow traffic signals
11. SERVICE AND MAINTENANCE
Periodic inspection, adjustment and lubrication
will keep your motorcycle safely and maximum
efficiencies. security is an obligation of the
owner to program maintenance and lubrication
may be considered strictly as a general
maintenance and lubrication intervals.