This presentation showcases my skills and my technical knowledge.

1. Mohamed Slama
5 Years Experience in CAD Design Engineer
Automotive Engineering &
Technical Management Services
Master in Production Engineering
________________________________________________
Expertise in CAD Applications (CATIA V5, Pro/ENGINEER) and
FEM‐CAE Applications (HyperMesh, Beta CAE ANSA, MSC PATRAN ‐Basic)
Telephone: + 33 6 14 72 79 68 (France)
+ 216 97 69 28 55 (Tunisia)
E‐mail: slama_mohamed@hotmail.com

2. i. Surface Meshing
First & Second Order
• Front-Rear Door
• Body Shell
• Sub-Frame
•Etc.,
SLAMA Med

3. ii. Volume Meshing
First & Second Order
• Tetra Mesh
• Definition and Management of CONTACTS (M,S)
SLAMA Med

4. iii. PRE- & POST- PROCESSING
• Setup a Modal Analysis
• Materials Management.
• Property Management
Creation Composite Laminates (thickness, angle, material, etc.).
• Create an apply constraints
• Create and assign load, pressure
• Identification and Management of CONTACTS (M,S)
Optimisation Contrainte maxi de VM
SLAMA Med

5. • from existing plans iv. CAD
• from could points
• from an environment and section
SLAMA Med

6. v. DAO
• Elements’ Listing & Implementation
• Automobile Fittings
SLAMA Med

7. vi. Project Management
SLAMA Med

8. vii. Project’s Life Span Estimation
Mesh will be realized
Exterior skin
Interior skin
Midsurface
- Thickness: 3mm
- Element size: 5*5mm
- Criterion: PSA
- Time: -- h
SLAMA Med

9. viii. Exchange problems with customers
SLAMA Med

10. ix. Interact with Clients vis-à-vis Problem Solving Process
Compliance with the arrow will induce a size <2mm in the fillet as indicated above
SLAMA Med

11. x. Quality Monitoring
SLAMA Med