Delta d product presentation For more information visit - http://www.aptoolsltd.co.uk/

1. Delta Quality Control
Delta D
1

2. Agenda
1-PRODUCT OVERVIEW
2-MARKET
DELTA
D
3-ORDER
4- COMPETITION BENCHMARK

3. 1. PRODUCT OVERVIEW
3

4. Delta : Product Features
Light and portable measurement unit
Just 500g
High Capacity Li-Ion Battery
16h power autonomy

5. Delta : Product Features
Wide Multicolor Display suitable for
Real time statistic feedback
Tool and Pset Manual insertion
Curve View & Analysis
Route View for operator selection

6. Delta : Product Features
Ergonomic support for table
To test easily tools with both hands
Belt Clip
For production line audit

7. Delta : Product Features
USB Port
Delta QC Programming & Export Data
RS232
Barcode connectivity for Pset selection
CVI Controller range autocal
ETHERNET RJ45
Delta QC Programming & Export Data
CVi 3 calibration

8. Delta D : Transducers connected
Digital Static Transducer DST
Or analog ST with adapter
Delta
1D,6D,7D
Digital Rotary Transducer DRT 4 & 5
Or analog CMD with adapter
Delta
1D,6D,7D
Digital Wrench Torque & Angle - DWTA
Delta
7D

9. Delta D : Applications
Tool Check &
Calibration
Delta
1D,6D,7D
Residual Check
Delta
7D
Joint Analysis
Delta
7D

10. Models – Delta 1D
The easiest way to test
Only Torque
Quick Tool Type & Test Selection
Without PC programming
Real Time Statistic
Min, Max, Avg, Standard Deviation
Data export to Delta QC software
1000 result stored in memory
10 Curve
Export to Delta QC software without license
Excel Export and Printing from PC

11. Models – Delta 1D
The easiest way to test
Tool Check Strategy for
All torque wrench types
Nutrunners
Impulse tool

12. Models – Delta 6D
Full Tool Testing Capability
Torque & Angle
Tool Testing Strategies
Tool & PSet definition
By Manual Input or Delta QC Software
Route Management
Min, Max, Avg, Standard Deviation, Cm, Cmk
Last Curve on display
10 Curve saved, 5000 Results
Barcode RS232 connectivity
To start PSet, Operator code or V.I N.

13. Models – Delta 6D
Full Tool Testing Capability
On-Board real time statistic calculation
Capability Machine Test
Integrated SPC Analysis
Cm, Cmk
control charts X and Range

14. Models – Delta 6D
Full Tool Testing Capability
CVi Controllers calibration
RS232
DY
A
RE
RJ45
CVi
Delta 6D
Delta 7D
RS232
t
RE men
U
UT elop
F
v
De
r
de
CViC
Un
Current Control
NEW
Delta 6D
Delta 7D
CVI 3

15. Models – Delta 6D
Full Tool Testing Capability
Delta QC Software Communication
By USB or Ethernet
Delta QC Software LICENSED
Tool, PSet, Route Programming
Tool, PSet, Route & Transducer Database
Result Viever & export
Trace Viever & export
Curve Comparison
Statistic on-line viewer (only when Delta D connected to PC) – ISO NF CNOMO Stardard

16. Models – Delta 6D
Full Tool Testing Capability
Delta QC Software ADVANCED
Same Delta QC Licensed features plus
Local SQL Results Database
Results and Trace database for off-line data control
All statistic available even when Delta D is not connected to PC

17. Models – Delta 7D
For quality Audit
All Delta 6D Features plus
Residual Torque Check with
Digital Wrench – Torque&Angle DWTA

18. Models – Delta 7D
For quality Audit
The goal of quality control is to check how the residual torque in the
joint compares with the torque
applied during
the tightening
process
50 Nm
50 Nm
+ 10%
-

19. Models – Delta 7D
For quality Audit
In a perfect situation we would like to have the same torque value
achieved during the tightening process.
In practice this is difficult as we have several combined influences:
torque
50 Nm clamping
force 26 kN
the torque is less due to relaxation of the joint
residual torque 45 Nm
residual clamping force
23,4 kN

20. Models – Delta 7D
For quality Audit
In some cases, we measure more torque due to the static coefficient of
friction. This static friction torque does not indicate that there is a higher
clamping force, but simply that the coefficient of friction is higher in a static
condition
and decreases once
very high static friction coefficient
the parts start moving
(dynamic)!

21. Models – Delta 7D
For quality Audit
Residual Strategies
Peak
(Delta 7D with DWT)
Threshold / angle (Delta 7D with DWTA)
Loose / tighten (Delta 7D with DWTA)

22. Models – Delta 7D
For quality Audit
Peak Torque Strategy :
• The operator see the bolt start moving
 it’s the breakaway point
Joint A
• But there is some delay to stop moving the arm, due to
body human being decision process
• Residual check value read on the display is different
than breakaway point
operator dependant

23. Models – Delta 7D
For quality Audit
Breakaway Torque Strategy
atic
h st ficient
g
ef
y hi
ver ion co
t
fric
Torque to Move Strategy (using DWTA)
• using the angle, Delta detect the Torque at a pre-defined
achieved angle.
• the value detected after a rotation (2° in standard joints) is
close to the real breakaway since the peak torque due to static
friction is not measured like in peak mode.
 Not operator dependant

24. Models – Delta 7D
For quality Audit
For the right Pulse Tool torque setting

25. Models – Delta 7D
For quality Audit
Yield Point Detection Strategy
For joint analysis
To setup correctly target tigthtening T&A

26. Models
Main Feature Resume
Features
Measurement
Tools
Pset
Transducers
Cm–CmK
Route
Curve
Result
Residual Check
SPC
Yield Point
CVI auto-calibration
RS232 BarCode
Delta6D
Delta7D
6159351010
•
•
•
•
•
•
•
•
•
•
•
•
•
Delta1D
6159351020
6159351030
Torque
T & Angle
No
1000
No
1000
Automatic
Automatic
No (Min, Max, Std Dev)
Yes
No
Yes
10
10
1000
5000
No
No
No
Yes
No
No
No
Yes
No
Yes
T & Angle
1000
1000
Automatic
Yes
Yes
10
5000
Yes
Yes
Yes
Yes
Yes

27. More Than Productivity