2. Table of Contents
1 Table of Contents 1
2 Version History 2
3 Gesture Definition 3
4 Function Specification 4
5 Mockup 5
6 User Stories 8
7 Start or Off the Air Condition 9
8 Adjust the air condition temperature 10
9 Open the cover to setup other functions 11
14年7⽉月30⽇日星期三
5. Function Specification 1
2
3
4 5
6 7
8 9 10
11
12
13
14 15 16
17 18 19
No. Function
1 Signal LED, On= Running, Flash= Fan
2 LCD, For temperature or timer
3 Air speed (High, Middle, Low)
4 Dehumidify icon
5 Fuzzy Icon
6 Sleep mode
7 Timer
8 Air conditioned icon
9 Ionized air icon
10 Air filter needs to be cleaned icon
11 Power button (On = LED on, Off = LED off)
12 Temperature up and down slide cover
13 Air speed (fuzzy, turbo, strong, low)
14 Oscillate air button
15 Timer button
16 Sleep mode button
17 Filter reset button
18 AC / Dehumidify / Fan switch button
19 Ionized air button
14年7⽉月30⽇日星期三
9. User Stories
1.As a user, I want to easily start the air condition even in dark environments.
2.As a user, I want to easily adjust the temperature even in dark environments.
3.As a user, I need to know the environment temperature after I setup the air condition temperature.
4.As a user, I need to know the information in remote controller.
5.As a user, If I want to setup the timer, air speed, sleep mode or reset air filter warning..., I can see the
signal and feedback.
14年7⽉月30⽇日星期三
10. Start / Off the Air Condition
When users want turn on the air condition, tap the
power button to start the air condition.
Users can turn off the air condition by tapping the
power button again.
When users turn on the air condition, the power
button backlight LED will auto turn on and got beep
sound. So users can get the feedback from power
button itself.
14年7⽉月30⽇日星期三
11. Adjust the Air Condition
temperature
Users can directly drag the cover up or down to
adjust air condition temperature up or down. So
even in dark environments, users still can adjust
temperature quickly and easily.
When users drag the cover up or down, they can
hear the beep sound from the remote controller.
The default temperature setting is 24 degree.
14年7⽉月30⽇日星期三
12. Open the cover to setup
other functions
When users need to setup other functions, the first
step is open the cover and then users can see the 7
buttons on there.
When users press the button, the feedback will be
shown there.
14年7⽉月30⽇日星期三
13. About this Design
Affordance. My design is according to this basic design theory.
The power and temperature adjustment are the most important functions in air condition remote
controller. So I need them to be the quite obvious function on the remote controller.
In standard mode (covered) the only one button is “Power” key. So any user can turn on/off the air
condition in any environment. The slidable cover can adjust temperature by following user’s instincts.
14年7⽉月30⽇日星期三