4. Technical terms used in brick masonry
•Header
Brick which is laid with its length perpendicular to the face of the
wall.
•Stretcher
Full brick which is laid with its length parallel to the face of the wall.
•Course
Horizontal layer of brick.
•Header course
Course of brick work fully composed of header
•Stretcher course
Course of brick work fully composed of stretchers.
7. Closer
Portion of brick cut in such a manner that one long face remains uncut.
King closer
Brick is cut in such a way that the width of its end is half of full brick.
Queen closer
Brick is half as wide as a full brick.
Half Bat
Portion of brick cut half across the width.
Bevelled closer
It is similar to king closer with the only difference that the whole length
of he brick is bevelled.
14. Brick work in mud
•The mud is used to fill up the joints
•Thickness of the mortar joint is 12 mm.
•cheapest.
•Maximum height of wall is 4 m.
15. Brick work in cement
I class
• Cement or lime mortar is used.
•The surfaces and edges of bricks are sharp.
•The thickness of mortar joints doesn’t exceed 10 mm.
II class
•Ground moulded bricks are used .
•Bricks are rough and shape is slightly irregular.
•The thickness of mortar joint is 12 mm.
III class
•Bricks are not hard , rough surface with distorted
shape.
•Used for temporary structures.
•Used in places where rainfall is not heavy.
16. 16
Mortar FunctionsMortar Functions
Provides for full bearingProvides for full bearing
Seals between masonry unitsSeals between masonry units
bonds masonry unitsbonds masonry units
18. BONDS
English bond
•In general practice this type of bond is used.
•It consists of alternate courses of headers and
stretchers .
•Considered as strongest bond in brick work
•For breaking vertical joints queen closer is placed
after first header
20. Flemish bond
•Each course consists alternate headers and
stretchers.
•Not as strong as English bond.
•Alternate course starts with a header at
the corner.
•For breaking of vertical joints , closers are
inserted in alternate courses next to the
quoin header.
22. JointJoint
Weathered JointWeathered Joint:: Mortar joint has sloped (downwards) edge.Mortar joint has sloped (downwards) edge.
Concave jointConcave joint:: Joint concave inwards.Joint concave inwards.
Vee jointVee joint:: mortar joint is in the form of a V.mortar joint is in the form of a V.
Flush JointFlush Joint:: Mortar joint is flush with the brick surfaces.Mortar joint is flush with the brick surfaces.
Raked JointRaked Joint:: A large portion of the mortar joint is raked out -A large portion of the mortar joint is raked out -
Not a safe, impermeable joint.Not a safe, impermeable joint.
Struck JointStruck Joint:: Mortar joint has a sloped (upwards) edge.Mortar joint has a sloped (upwards) edge.
JOINTS IN BRICK MASONRYJOINTS IN BRICK MASONRY
24. Advantages of brick masonry
The brick masonry is cheaper as compared to stone
masonry.
Bonding strength is very good.
In brick work , the mortar joints are thin and hence
the structure becomes more durable.
No complicated lifting devices are necessary in brick
work.
Brick work can be done by the less skilled labours
also.
In Brick work good quality of bricks posses good
fire resistance.
Due to regular size of bricks they are easy to
handle.
25. Defects in brick masonry
Sulphate attack
Sulphate salts present in bricks work react with alumina content of
cement .
It occur in boundary walls
Crystallization of salts from bricks
Occur in masonry made out of brick which contain excessive soluble
salts
This phenomenon is also known as efflorescence.
Corrosion of embedded iron or steel
Iron or steel embedded in brick work gets corroded in the presence
of dampness
On corrosion the metal expands in volume and tends to crack the
brick work.
26. BIBLIOGRAPHY
BUILDING CONSTRUCTION by
Rangwala.
BUILDING CONSTRUCTION by
Sushil Kumar.
Civil Engineering - Building materials
and Construction by Dr. B.
Bhattacharjee( IIT Delhi )
WIKIPEDIA THE FREE
ENCYCLOPEDIA