4. BACK UP MENGGUNAKAN CLI
[admin@MikroTik] > /system backup save name=backup -1
Saving system configuration
Configuration backup saved
[admin@MikroTik] >
5. RESET ROUTER
Untuk mengembalikan ke konfigurasi awal
(default).
Perintah ini menghapus semua konfigurasi yang telah dibuat,
termasuk user dan password.
Hanya bisa dilakukan oleh user dengan hak penuh (grup: full)
[admin@Router-MikroTik] > system reset
Dangerous! Reset anyway? [y/N]: y
6. BACK UP KONFIGURASI
Backup bisa dilakukan juga menggunakan perintah export.
Hasil export ini berupa script (text base configuration) yang
bisa dilihat dan diedit menggunakan text editor.
File script bisa langsung di restore ke router dengan perintah
import
7. MEMBERI NAMA INTERFACE
Interface set ether1 name=internet
Interface set ether2 name=intranet
Interface print
8. MEMBERI IP ADDRESS PADA INTERFACE
Ip address add address=192.168.0.1/30 interface=internet
Ip address add address=192.168.10.1/24 interface=intranet
Untuk menghapus gunakan perintah “remove”
Contoh : ip address remove (lalu isikan urutan IP yang akan
dihapus) kemudian tekan enter
9. MEMBERI IP ROUTE
Ip route add gateway=192.168.0.2
Untuk melihat hasil : ip route print
10. MEMBERI IP DNS
Ip dns set server=8.8.8.8
Cek hasil “ ip dns print”
11. KONFIGURASI IP FIREWALL NAT
Ip firewall nat add chain=scrnat action=masquerade out interface=internet
Ip firewall nat print
12. PERINTAH LAIN
Perintah restart = system reboot
Perintah Shutdown = system shutdown
Perintah reset = system reset