Sergeant Derek Miller
Occupational Health Technical Officer, Royal New Zealand Air Force
Directorate of Air Force Safety and Health, HQ485 Wing, RNZAF Base Auckland, Auckland 0662
derek.miller@nzdf.mil.nz
(P17, Wednesday 26, Civic Room 2, 2.30)
All Time Service Available Call Girls Marine Drive 📳 9820252231 For 18+ VIP C...
Good Practice When Buying or Using a Local Exhaust Ventilation System
1. Good Practice When Buying or Using a Local Exhaust Ventilation (LEV) System Sergeant Derek Miller – Occupational Health Technical Officer, Royal New Zealand Air Force [email_address] OHSIG – Wellington 26 – 28 Oct 2011
No process modification required Requirements are plain eg welding or solder fume
Exposure benchmarks – (this is the exposure that may result once the system is in place, normally a fraction of a substances ezposure limit) need to be realistic and may require specialist advice. However in mixes etc there may not be exposure limits so may have to use the toxicity or safety phrase from SDS – This area should not constrain the designers or suppliers. Indicators – simple could be a warning light for go to red for change filter Easy to use etc – accessibility, skiin contamination, waste removal, filter changing etc without spreading contamination Training – Supplier provides training in how to use, check and maintain system User manual – describes system, how its used, check. Maintained and tested, performance benchmarks and part replacemnet schedules where necessary Logbook – record results of checks and maintenance