This is a new analysis on wind generation technology, and in particular, a new device utilised to harness wind energy through vibration and electomagnetic extraction.
2. Wind energy is not just about turbines and it is not just about aerodynamic blades. It
is also about frequency and vibration. It is time to rethink the standard equation of
wind energy and how exactly we extract this energy from the wind. It is time to take a
fresh look at the same problem... from a different perspective - to arrive at a
completely different solution. A solution that works with the natural rhythms and the
natural harmonics and oscillations of wind.
THE CONCEPT
3. The Electrical Long Linear Inductor (ELLI) Wind Power Generator is a new, green technology that
harnesses wind energy in a unique manner. Like the strum on a guitar, the grass blowing, and the flag
flying, this technology is able to transduce the vibrational and oscillatory nature of wind into a useable
electric current to power any electrical system.
Utilizing existing technologies, it is a new passive way in which we can generate power in a completely
green, sustainable manner, without the use of traditional rotary aerodynamic wind turbines.
Wind oscillates, and causes objects to oscillate in tune with it. The way trees and grass move in the wind,
or the way flags flap about is the inherent characteristic of wind. This is a solution that works with the
natural rhythms and the harmonics and oscillations of wind. It is a fresh look at an age old problem.
THE CONCEPT
4. This is not another new airfoil or airfoil configuration of the age old wind
turbine with the electrical alternator or generator and the massive
rotating blades, nor the supposed “new” vertical wind turbines. We are
taking the turbine, and literally exploding it… and turning it sideways.
THE NEW WIND POWER TRANSDUCER
5. This new wind power generator utilizes existing technology that is merely
reconfigured in a novel manner; a simple faraday generator consisting of a
magnetic inductor pickup, a thin electrical wire spanning the thin, light
weight frame. A flag or “flow enhancer” is attached to the wire to increase
the oscillations of the wire caused by the wind.
THE NEW WIND POWER TRANSDUCER
6. This central, suspended wire acts as the “rotor” of a traditional generator, generating a
current through the coiled magnetic pick-up once this wire moves across the magnetic field.
The electromagnetic inductor coil is attached to the frame, and is mounted just below the
strung “rotor” wire. With a “flow enhancer” or flag, the oscillations of the wind cause the
rotor wire to vibrate across the magnetic pickup – cutting the magnetic lines of force of the
pickup, generating a current through the system. The current generated can then be
channeled into a variety of power output options and energy storage systems.
THE NEW WIND POWER TRANSDUCER
7. Refit Existing Structures – ANYWHERE there is a long, linear surface
•Mount system vertically on the corners of buildings. Large or small buildings – industrial,
commercial, rural, residential, farming
•Mount system horizontally across the peak of the roof of any building
•Mount system on existing free standing towers, street light posts, ornamental vertical structure
•Mount system in Rural areas – wire fences, road signs, sides of highway
•Feeds into a standard battery storage system, utilized by all green technologies
ELLI GENERATOR APPLICATIONS
8. Install the technology close to “home”
•Across the rooftop of homes and businesses
•Attached to existing infrastructure – flag poles, street light towers, existing power poles
•Feeds into standard “green energy” battery charging systems (solar, wind turbines)
ELLI GENERATOR APPLICATIONS
9. Initial results from the first 4 foot high prototype devices are quite promising:
•Simple, inexpensive, crude construction to test hypothesis of extracting energy from
wind oscillations
•30-50mV AC average output during initial tests with first prototype device; peaks of
70mV were achieved.
•Technology fully scalable for higher outputs
•Continuous operation under nominal wind conditions
•Feed into existing battery storage banks
PROTOTYPE TEST RESULTS
10. Variables for Power Output Refinement:
•Maximize inductance of magnetic coil pick-ups
•Quantity and placement of the magnetic pick-ups
•Maximize harmonics of vibrating rotor wire (length, tension, thickness, size and
placement of wind flow oscillating enhancers etc.)
Existing system is fully scalable and able to produce maximum output – limited only
by the management of the appropriate variables to produce the exacting and desired
output.
SCALABILITY AND VARIABLE CONTROL
11. Promotional, informational video of basic technology:
Youtube Video: http://www.youtube.com/watch?v=IWowOd4NG2Q
This generator also was entered into the GE ‘ECOMAGINATION’ Energy Competition:
http://challenge.ecomagination.com/home/A-Fresh-Perspective-on-Energy-Extraction
ELLI GENERATOR IN OPERATION
12. This new and evolutionary development of wind power technology has an exciting future. The
technology is stable but requires continued testing and development to build systems capable of
commercial and residential high output systems. Here are the technology development pathways that
are required:
•Fully scalable system to produce desired output based on known variables
•Full scale power output testing
•Variable management
•Data logging
•Device manufacturing refinements
THE NEW BUSINESS – OF TECHNOLOGY
13. The business potential of this new advance in wind power technology is immense. It is, in fact, a
completely new and refreshing possibility within the worldwide marketplace. It is a new business and
market unto itself. We will build and establish a viable business to continue development and sales of this
product into mainstream green energy renewable markets. This is what we will accomplish:
•Establish funding sources
•Develop worldwide marketing and sales plans
•Determine net-energy value of devices
•Develop and implement manufacturing of devices
•Establish engineering criteria
•Continued R&D
THE NEW BUSINESS – OF BUSINESS
14. This new wind-driven device is evolutionary in scope as it grows from what we see and what we know. It is cost-
effective, scalable and extremely practical. Refitting this technology to new and old structures is relatively easy,
as it is only based on placement of the vibrating rotor wire spanned across the magnetic pickups, which can be
placed on any long planar surface. Many other benefits include:
•Extremely low-cost; no expensive turbines or complex rotary mechanics, which allows this device to be used in a
much larger range of markets and price points
•Low technology and low mechanical precision required; unskilled operators fully able to assemble and use
•Easy to set up and install; can be completed by a basic homeowner
•More efficient use of space as compared to large scale wind turbines
•Less environmental impact to surrounding areas; installing in smaller residential and commercial areas is easily
completed
•Aesthetics – not as large and visually distracting as existing windpower turbines
•No moving parts
•No wind turbine overspeeds; no complex mechanics, linkages, etc.
•Light weight and easy to transport
•Easy to repair and replace
•Easy and quick set-up in campsites, remote areas, disaster zones
•Integrates into existing green technology electrical storage systems
•Utilize existing infrastructure for main support systems; devices can be mounted on almost any long linear
surface (towers, lightposts, building sides, rooftops, etc.)
OVERALL ELLI SYSTEM BENEFITS
15. Please contact us for further details:
Doyle Buehler
doylebuehler@gmail.com
+1-204-227-5323
+61 413 106 880
GET READY TO ENGAGE THIS NEW
FORM OF WIND ENERGY….AND GET
BLOWN AWAY.