Russian Call Girls In Gurgaon ❤️8448577510 ⊹Best Escorts Service In 24/7 Delh...
Pharma caem caem uk eng
1.
2. TN9 system for pharmacies and
drugstores - Introduction
Caem presents a series of
innovations that complement the
current offer based on the
structure TN9 and everything that
revolves around it, to complete
and improve the proposal of
furniture in pharmacies and
drugstores, as well as new
display solutions, aesthetic and
point of sale communication .
3. TN9 system for pharmacies and drugstores
WALL: TN9 available from H192 to H296, optimizes the
backs based on the height of the base that is chosen, trying
to avoid where possible the use of the backs H8. Normally
the depth of the base are 30 and 40, it depends on the
applications and from the surface of the pharmacy in
question.
The steps required are 45-70-80-100, but remain available
steps Caem standard as the 133, where the surfaces are
large and may be required. In this case care must be taken
to the reinforcement (1) to predict more than 100, it is in the
plans in metal and in glass tops.
It 'also required the reinforcement under the metal shelves
30cm deep.
It is mandatory to provide a wall mount for each pillar and
wall structures in central room, always check the layout and
possible problems of stability and security.
4. Montante TN9 and Base TN – Inserts and Adj
Feet
Both the uprights which provide the bases
support galvanized and a leg
adjustable.
The uprights can be
Extended with the appropriate support
Galvanized 101C # Z
6. Wall Unit: side views
Warning:
In Configuration Plan Base Podium lateral
dimensions will not be 9 + 30cm + 2cm, but 9 +
34cm.
7. TN9 system for pharmacies and drugstores - Wall
Linear Structures
EXAMPLE OF WALL WITH PLANS
IN GLASS AND CABINET
The graphics adhesive or magnetic
this case directly attached above the
top back.
Glass top 25cm, on shelf
minimal 10, step 80.
1 drawer cabinet in melamine
Socket frame with plexi opal, backlit.
The T5 tubes is secured under the
cabinet. The configuration is for
guidance only.
8. 90° Corners Internal and External
AAA = 90°
External
AAT = 90°
Cut Internal
Available in configuration
to entire floors T13, modular
Multi-storey, glass shelves
suspended.
Not available basic plans
Podium.
9. Special Corners– AAI 45°
The configuration
represents a possible
configuration with AAI to 45
° internal corners which
connect the linear elements
creating curved walls.
10. Special Corners– AAE 45°
The configuration
represents a possible
configuration of AAE to 45 °
internal corners which
connect the linear elements
creating
11. Angoli AAI – AAE – 45°
Available in configuration
to entire floors T13, modular Multi-storey, glass
shelves suspended.
Not available basic plans Podium.
14. Gondola End – Promo Ends
TN9 Gondola with Ends
Side A - TN9 End No Base
Side B - TN9 End With Base
H = 112 to 236
15. Upright Side Cover is 3cm to align
Mast coverage is wider
than normal to guarantee
alignment of design
L = 3cm ; H = HHH -
9PIT51203A # HHH03
(HHH H = upright).
Does not include caps
on the uprights
TN9 End – No Base
Straight Lines when using a Podium
TN9 End – With Base
Straight Lines when using a Podium
PodiumNo Podium
Podium
17. End SLIM40 - Details
step 70cm
Footprint L78cm x 4 x H
H = 112-128-136-148-156-172
* (+ feet TN9, 25mm≈50mm)
Top cover with or without
support door-sign
Mono-pitch 40mm slots for all
displays Tn, step 70, only front
Standard front step back 70 -
H8-24-44
* For the height H172 upper
additional reinforcements are
necessary in the design phase
Composition 1 KIT tested:
Panel nr1-9PIT50701A # HHHPPP
Backs - quantity and type to be
verified on the basis of 'HHH, use
backrests standard 44-24-8,
passo70cm for composition
Cover without holes No.1
9PIT50702A # PPP
or alternatively
Cover with holes * No.1 9PIT50702B
# PPP
No. 2 feet 101A C #
NR.8 Autofil.6.3 * 16991 # 03A316
* Add No.2 supports 990 # 0024 and
screws only for the covers with holes
18. Slim40 – Plan View
The head Slim40 because only 40mm lateral dimensions, in
addition of course side of the upright pack size of 15mm on
each side. The back to step 70cm is inserted in the rear
panel, the footprint of the panel is 78cm to optimize the
layout when mounting plans Podium base.
When mounting the floors T13 of the base, the head SLIM40
does not make the thread, but protrudes from the front of the
plane and the tip of the base, as shown in figure
Esploso
composizione tipo.
Esempio.
19. Gondola Options
Base Shelf
with Multi
Planks.
Ground Base Full
non pierced 'Extra'
and socket Metal.
Ground Base Podium is a
base shelf with front
kicker in a single piece.
Not drilled and Socket
Integrated Metal. Finishes
Side Stands L = 3 and
Bases.
Ground Base Podium non
pierced with Socket
Integrated metal.
Suspended floors glass.
Finishes side stanchions
and bases.
Drawer
independent
escort,
according to
H16 and 24.
Basic plan
T13 # N.
20. Gondola Options
Ground Base Podium.
Suspended floors in
metal.
TG configuration
SLIM40 with metal
shelves
TG semi-circular
configuration, floor base
metal, suspended floors
glass
Custom
configuration
and related
21. On Castors
The Kit nr. 3 connecting
bars under the basic
plans provides Nr. 6
wheels, available in
Ø60mm and Ø50mm
(with and without brake)
TG semi-circular configuration,
which is also available with
wheels *.
Provide a wheel on the same
model as those used in gondola
Provide a stabilizer
bar in every sector to
be mounted between
the uprights.
22. On Castors
A fully modular castors system is
Available to make gondolas
Mobile and safe
23. Improved Product Merchandising
The shelf is not drilled on
Pharma25, dedicated to the
pharmacy.
The floor 30cm and 40cm by 25cm
deep, and in the steps 70-80-100
and a height of only 25mm,
optimizes the merchandising of the
store thanks to the new door-price
label H26mm, rocker, available in
transparent finish.
PHARMA25 Bracket is slimmer,
with reduced height and less
metal visible
Available L25-L30-L40
P045-P070-P080-P100-P133
30cm shelf has an undershelf weld support
24. New: EPOS H26mm
New Epos H26mm. T46#B– for
T13 metal one piece shelves
compatible with TN9
NEWEPOS
H26mm. 146#P– forglass shelves
8mm
Transparent in
P070-P080-P100-P-133
Available
transparent
P070-P080-
P100-P-133
The door-front
prices cluttering
32mm and both are
swinging. It can be
mounted on
thickness from 6mm
to 10mm.
25. Shelf Management
Organization system of
the shelf in transparent
acrylic. A rail adhesive
back allows to frame
dividers H35mm.
Rail L = P - 4mm for the
metal shelves
Rail L = P - 47mm for
glass tops
26. H&H System
Rail - Profile rear adhesive
L = P - 4mm for the metal shelves
L = P - 47mm for glass tops
Dividers: Prof.netta = Depth rated floor -
10mm
Detail at the back
Made to order
27. New Bracket PHARMA25-9PIT50801A#
Shelf 2 hooks, depth 25 and
30, # 2225 and # 2230
3 shelf hooks, depth 40, 3240
#
Tilt -15 ° / 0 °
To plan T13
The front door is the thread of
the money for labels from
26mm
The new shelf-profile thinner by the aesthetics and
function, optimizing the merchandising and handling
products with the entire plans '' Extra ''.
28. Minimal Glass Shelf
Depth 20-25-30-40
Steps 65-70-80-100-133 *
* predict reinforcement
mandatory
Thoughened
Rounded Front Corners
Safe Smooth Edges
For matt and colored finishes, please
enquire specifically
29. New Base Shelf PODIUM –
9PIT5120A#N00HHLLPPP
WHERE:
N = non-pierced
00 or 01 = number reinforcements
HH = Height base 16 or 24
LL = Depth base (30-40)
PPP = Step (100-080-070)
More than 100 expected
reinforcement 1
Not available for corners
SPECIAL ':
A plan that goes on a 30cm, 34cm really cluttered, serve then covers basic special for TG and in the mural, also
serve covers uprights special only in TG (in order to go to cover the part of the plan surplus TG step 70cm)
Basic coverage:
9PIT51202A # HHHLL R (right HHH = 016 or 024, LL = 30)
9PIT51202A # HHHLL L (left HHH = 016 or 024, LL = 30)
Mast coverage L3 *:
9PIT51203A # HHH03 (HHH H = upright)
* A bayonet mount before, they do not need caps upright, cluttered 3cm.
31. Bulk display details
Code Description Qty
BackBulkP= XXX9PFR22502A PPP# 1
Piano BulkP= XXX9PFR22503A # 1 PPP
Shelf dx 2 positions 25 ° - 30 ° 9PFR22501A # 1 R
Shelf sx 2 positions 25 ° - 30 ° 9PFR22501A # 1 L
Rivets 4 * 8993 # 0010408A 4
Front glass H14 P= XXX9SA FR225XXX# 1
Side glass dividers H14 L 25 * 9SA FR22504A # 1
* Provide the minimumnumberof partitions of 2 pieces perexhibitor,
in addition to the dividers customerchoice
32. Bulk Details
dimensional data
PLANNEDSTEPS: 45-70-80-100
DEPTH'PROFIT: 26.5 cm
HEIGHT OF GLASSES: 14 cm
OVERALL MAX20 °: 34.2 cm (from
the back) + price holder
OVERALL MAX30 °: 31.7 cm (from
the back) + price holder
HOLDERS: Both h39mmthat T46 T46
# A # Bh 26mm
GLASS: Polished wire, hardened, 6 mm
thick
STEPRACKPARTITIONS GLASS:
64mm
33. Covers
Covers uprights
bayonet mod. C 110
# C09 and covers
basic left and right #
109A contribute to
the overall
improvement of the
aesthetic.
Podium for the plan
to provide for the
specific hedging
9PIT51202A #
34. Sliding Upright Side Covers
Covers uprights
bayonet mod. C 110
# C09 must be
compulsorily
installed before
placing the uprights
vertically. Place the
mast on the ground
horizontal or tilt it to
be able to enter the
coverage in the fins.
Also it applies to
covers L3.
35. Top Covers and Signage Holders
9PIT48490A # PPP
PPP = 65-70-80-100-133
PPP <= 070, two supports
PPP> = 100, three supports
Support door-sign 990 # 0024 +
991 # 01D04016 TS Screw 4 * 16
pcs. 1 each
991 # 06004000 Washer D = 4 pcs.
1 each
991 # 02A04000 nut TE D = 4 pcs. 1
each
Top Covers with Signage Holder Top Coverwith Pre Drilled Holes
36. Wall Unit Signage Holder
170H # 044RC and LC
(H44)
170H # 052RC and LC
(H52)
120 # 008PPPC - Nr.2
168 # APPPC - No.1
168 # BPPPC - No.1
991 # 05C04009 - Nr.4
PPP = 070-080-100-133
The mounting bracket can be tilted
and positioned to sign up that you
want, based on the height that you
want to coverwith the posters.
Available in two heights 44cmand
52cm, it becomes useful when the
store there are different ceiling
heights, you can orderthe same
height of the uprights by adjusting
only the signs on the basis of false
ceilings.
Wall Signage
Caem does not provide the posters, we
recommend thicknesses of 3 / 4mm
37. More options for Stock and Back Door Rooms
Metal drawer
H40 L50 P100 -
Available with
and without lock
Metal drawer
H28 L50 P100 -
stackable
Available
without lock
38. Pharmacy VS OTC
OTC is ‘over the counter’, the self service area of a pharmacy
OTC represent a higher sales area for the pharmacy business,
letting customers browse and buy product, both by need and by
impulse
Pharmacy is the professional area ‘behind the counter’
Pharmacy is mixed with Dispensary, where medicines are stocked
and the pharmacist operates
An example follows of different pharmacy set ups to have more or less
OTC space by using shelving or drawers in the dispensary. The
green units represent extra display area in OTC obtained by the use
of more efficient dispensary area