This document provides an overview of the ScanView project for offshore oil rigs. ScanView uses 3D scanning technology to capture point cloud data from oil rig structures, which is then processed into intelligent P&IDs, 3D models, and a 4D plant model for maintenance planning and as-built documentation. The benefits include reduced project risk, rework, and shutdown times. Sample projects include a Chevron revamp. APS Engineering can provide an all-in-one scanning and modeling solution, with estimated costs of €2,500-3,500 per day for on-site scanning, €4,000-6,000 total for building a plant model, and €1,000-1,500 per

1. APS Engineering
Research & Development B.V.
Presented by: R.Meulenbroek (APS InterTech/Industrial Engineering)

2. Offshore – Oil-Gas-Power & Process Industry
ScanView
Project Offshore Oilrigs
Presented by: R.Meulenbroek (APS Offshore Research & Development)
Revised date: 14-09-2012

3. The ScanView principle overview
Maintenance
Intelligent P&ID’s
Intensity data
Processing
Software Intelligent 3D models
3-D point E&I Integration
3-D Plant-
cloud 4D
Model
Range data Data processing network from raw data to CAD model

4. ScanView by APS Engineering & CEA Systems
Existing Situation,
Data need
P&ID
Specs Maintenance
In-house data,
SAP/ Exact
etc. link
Purchase AutoCAD /
Microstation
Live Company Database
Continuously as-build
3D Intelligent Plant-4D E&I Electrical
model, Pipe
Project management,
2D/3D/Data Interface of choice Inspection Planning E&I Instrumentation

5. Why Scanning:
Risk Analyses
As part of a company Risked Based
Integrity Management plan
We just want to know……..
Upfront Maintenance planning
As- built comparison
Educational reasons
Maybe still more…….

6. Benefits:
Applicable to new and revamp installations
Up front view before installation upgrade
Reduce shut–in / Shut down time
Rework reduced to a minimum
Reduced project risk
Scanned once / multiple purposes afterwards
Insight Front-end savings
Engineering & Fabrication costs

7. Examples from practice:
Proven solutions at:
Chevron Revamp with Cyrax 3D Scanner etc…
Engiplast at………….
More at Etc….

8. So what can WE do for you:
All-in one solution (e.g. ScanView)
On-site Scanning
Translating scanned ‘point cloud’ into database
Create intelligent P&ID’s
Create Intelligent 3D Plant model
Handover, Reports & comments and Follow up strategy
Project management
Setting scope bounderies (do’s and don’ts)
Upfront budgetting
Before project starts estimating budget

9. Your Investment (rates are indicative):
Scanning on site
Approx 3-5 days with 2-3 persons
Min of 3 days, maximum 15 days
Depends on type of assignment
Variance 2,500 – 3,500 Euro day rate
Building Plant model in Plant-4d
Labour: Approx. 4-5 days translating data cloud
Labour: Approx. 16-20 days building plant model
Depends on type of assignment
Licenses
Dayrate approx. 1200-1500 Euro
Reports and Advise
Approx 0,5-1 day project handover
Follow up
Dayrate approx 1000-1500 Euro

10. Contact our Business addresses:
Main Office / Business & Postal address:
Hart van Brabantlaan 12-16
5039 JL Tilburg
The Netherlands
Tel: +31 (0)6 21828372
E-mail: Info@apsengineering.eu
Website: www.apsengineering.eu