Our objective is to provide our customers with products which enable them to differentiate themselves in the market place, wherever in the world they may be and whatever stage of national economic development.  Our products allow our customers the flexibility to support a diversity of applications. We continue to invest in leading-edge technologies and minimise the total cost of ownership.  Our ultimate aim is to build-up a long and prolific relationship with our customers

1. Perfect Graphics Pvt Ltd
 Our objective is to provide our
customers with products which
enable them to differentiate
themselves in the market place,
wherever in the world they may be
and whatever stage of national
economic development.
 Our products allow our customers
the flexibility to support a diversity of
applications. We continue to invest
in leading-edge technologies and
minimise the total cost of ownership.
 Our ultimate aim is to build-up a long
and prolific relationship with our
customers.

2. 4 Colour Perfecting
Printing Unit (4+4)
 The WEBKING 4 colour perfecting printing unit is
a Common Impression Cylinder (CIC) and 20
cylinder-configured designs where the colour
registration does not change during the entire
roll unwind period. Experience the colour
printing at its best, as never before, with
pinpoint registration on both sides of the web
irrespective of varying press speeds and varying
web tension. A pin register system is built into
the plate bender and is carried through into the
pin register system built into the plate lock-up.
The pin register assures that when installed, the
plate is in proper position. In addition, all plate
cylinders are equipped with on-the-run side
register and circumferential movement for
perfect colour registration. Narrow width
blanket cylinder provides larger print area. The
pneumatic controls ensure ease and speed of
operations and the accurate plate punching and
bending system ensure utmost accuracy in pre-
press operations. The unit being modular in
construction other endless possibilities of colour
units in configuration of 4+2, 4+1, 2+1, 1+2 etc.
are also available to meet the varied
requirements. WEBKING Four Colour Perfector -
Endless possibilities with profitable solutions!

3. 4 Colour Perfecting
Printing Unit (4+4)
 Motorized inking system
 Brush dampening system
 Shields for brush dampening
 SS cylinders with ground and
hardened bearers
 Pneumatic controls for ink, dampener
and impression on/off
 Pneumatic and/or mechanical
expandable core shaft
 Pneumatic roll lifting
 Roll stand with pneumatic disk brake
 Web break detectors
 Plate punch register system
 Lever type ink keys
 Double ended plate bender
 Chilled water circulation system
 Narrow gap blanket cylinders

4. 4 Hi Printing Unit
(4+4) Staggered Blanket Cylinders
 Motorized inking system
 Brush dampening system
 Shields for brush dampening (optional)
 SS cylinders with ground and hardened
bearers
 Pneumatic controls for ink, dampener
and impression on/off
 Pneumatic and/or mechanical
expandable core shaft
 Pneumatic roll lifting
 Roll stand with pneumatic disk brake
 Web break detectors
 Plate punch register system
 Lever type ink keys
 Double ended plate bender
 Chilled water circulation system
 Narrow gap blanket cylinders
 Cut-off size available 546mm

5. 2 Colour Perfecting
Printing Unit (2+2)
 The WEBKING 2 CP is the perfect example of proven
technology. Specially designed for BOOK PRINTING the
WEBKING 2 CP printing unit is a Common Impression
Cylinder (CIC) and 10 Cylinder configured design where
the colour registration does not change during the
entire roll unwind period. Colour register is maintained
even with varying press speeds or with varying web
tension. It brings you the magic of full colour, as never
before, with pinpoint registration on both sides. It is
fast and easy, has simple plate lock-up and has
facilities for on-the-run pin register adjustments. The
precisely ground and hardened bearers provide
constant reference surface for perfect accuracy of
cylinder impression. A pin register system is built into
the plate bender and is carried through into the pin
register system built into the plate lock-up. The pin
register assures that when installed, the plate is in
proper position. In addition, all plate cylinders are
equipped with on-the-run side register and
circumferential movement for perfect colour
registration. The pneumatic controls ensure ease and
speed of operations and the accurate plate punching
and bending systems ensure utmost accuracy in pre-
press operations.

6. 2 Colour Perfecting
Printing Unit (2+2)
 Motorized inking system
 Brush dampening system
 Shields for brush dampening
 Bearer to bearer plate and blanket
cylinders
 Pneumatic controls for ink, dampener
and impression on/off
 Pneumatic and/or mechanical
expandable core shaft
 Pneumatic roll lifting
 Roll stand with pneumatic disk brake
 Web break detectors
 Plate punch register system
 Lever type ink keys
 Double ended plate bender
 Chilled water circulation system

7. 4 Colour Satellite
Printing Unit (4+0)
 The WEBKING QUADRACOLOUR satellite printing unit
has been proven by the industry as the finest for
high quality, low wastage, four colour printing
consistently page after page. It’s flexibility and
versatility is unlimited. It is ideal for the production
of a variety of jobs ranging from 4 colour
newspapers and posters to magazines etc with super
speed and minimum wastage. Designed on the
principle of “Common Impression Cylinder” (CIC), it
is fast and easy, has simple plate lock-up and has
facilities for on-the-run pin register adjustments.
The precisely ground and hardened bearers provide
constant reference surface for perfect accuracy of
cylinder impression. A pin register system is built
into the plate bender and is carried through into the
pin register system built into the plate lock-up. The
pin register assures that when installed, the plate is
in proper position. In addition, all plate cylinders
are equipped with running lateral and
circumferential adjustment for perfect colour
registration. The pneumatic controls ensure ease
and speed of operations and the accurate plate
punching and bending systems ensure utmost
accuracy in pre-press operations.

8. 4 Colour Satellite
Printing Unit (4+0)
 Motorized inking system
 Brush dampening system
 Shields for brush dampening
 Bearer to bearer plate and blanket
cylinders
 Pneumatic controls for ink, dampener
and impression on/off
 Pneumatic and/or mechanical
expandable core shaft
 Pneumatic roll lifting
 Roll stand with pneumatic disk brake
 Web break detectors
 Plate punch register system
 Lever type ink keys
 Double ended plate bender
 Chilled water circulation system

9. Perfecting Printing
Unit (1+1)
 A robustly constructed unit using solid side
frames of 50mm thickness of graded casting
that ensures long residue life of the machine.
Reliable enough to understand deadlines to
the tee. The horizontal main drive at blanket
cylinder level is mounted on anti-friction
bearings. The high line position provides a
direct drive to the printing units. The power is
transmitted through helical gears throughout
the printing unit. The assembly is lubricated
by a pressurized oil circulation system.
Clutches are provided to individually silence
either folder or printing units. The precisely
ground and hardened bearers provide constant
reference surface to perfect accuracy of
cylinder impression. Plate and blanket
cylinders are statically and dynamically
balanced to ensure trouble free running of the
machine at highest speed. The unit is
available either with manual or with
pneumatic controls and is equipped with a
host of other advanced features.

10. Perfecting Printing
Unit (1+1)
 Motorized inking system
 Brush dampening system
 Shields for brush dampening
 Bearer to bearer plate and blanket
cylinders
 Pneumatic controls for ink, dampener
and impression on/off
 Pneumatic and/or mechanical
expandable core shaft
 Pneumatic roll lifting
 Roll stand with pneumatic disk brake
 Web break detectors
 Plate punch register system
 Lever type ink keys
 Double ended plate bender

11. Broadsheet/Tabloid
Folder
 The WEBKING presses are equipped with
a standard single former heavy duty 2:1:1
jaw type folder. One tabloid slitter is
located on the roller, top of the former.
It is also equipped with an electronic
copy counter, and a standard motor
driven delivery table. The mechanical
clutch disengages the folder from the
main drive shaft thus allowing the units
to run with the webs led through the
press and the folder remaining at a stand
still. This feature is particularly useful
during make ready time and also the
printing unit to be run in reverse
direction to facilitate plate removing.
The folding mechanism consists of one
cutting cylinder, one double dia folding
drum, one jaw cylinder, one pair of
driven folding rollers and one fan
delivery.
 Other folding options available are: (1)
High speed reciprocating and rotating
chopper type Quarter Page Folder with
Creaser and Parallel Perforator (2)
Double Parallel Folding System with Cross
Perforator.

12. Broadsheet/Tabloid
Folder
 2:1:1 jaw type
 Electronic counter
 Standard and/or motorized delivery
table
 Pneumatic pull through assembly at
RTF
 Half fold kicker
 Air former
 Balloon / Upper former
 Bay Window
 Turner Bar

13. Bay Window

14. Turner Bar

15. Metal Halide Printing
Down Frame
 The OHX / INS Printing Down Frames
have been in the field for over one and
half decades with major newspapers
and commercial printers as customers.
A wide range suited and tailored for
the industry has been our specialty.
Forays into infrared and UV conveyer
systems have also been successful.

16. Metal Halide Printing
Down Frame
PLATE SIZE 25X36", 37X45", 45 X 55"
TRANSFORMER THERMALLY PROTECTED
MODE OF OPERATION BOTH AUTOMATIC AND MANUAL OPTIONS
EXPOSURE COMPUTER MICROPROCESSOR BASED, 9 CHANNEL
LIGHT INTEGRATOR FOR UV OUTPUT COMPENSATION WITH
AGEING OF LAMP
INPUT VOLTAGE VARIATION VOLTAGE TAP SELECTOR FOR SELECTING
INPUT VOLTAGE RANGE
INSTANT & SHUTTER SYSTEMS IMPORTED REFLECTORS FOR COLLAMATION
MODEL DIMENSION (mm) EXPOSURE SIZE POWER REQUIREMENT GROSS WT
OHX/INS 4070 1050X850X2270 700 X 950 mm 440 V 50HZ, 3 PH, 6 KVA 300 Kgs
OHX/INS 4095 1250X1050X2270 950 XI 150 mm 440 V 50HZ, 3 PH, 6 KVA 350 Kgs
FTX/FTi 4070 1420 X 970 X 1220 700 X 950 mm 440 V 50HZ, 3 PH, 6 KVA 400 Kgs
FTX / FTXi 4095 1620X1170X1220 950 XI 150 mm 440 V 50HZ, 3 PH, 6 KVA 450 Kgs

17. Conventional Offset
Plate Processor
 The DPX conventional plate processor is
a rugged completely automatic machine
for both positive and negative offset
plates. A unique worm & worm wheel
drive system is precise and self
lubricating. The plate processor is
provided with a rewash slot for
finishing and drying. It helps preserve
the plate for future jobs and also
deletion. The front panel has an easy to
use microprocessor with LCD display.

18. Conventional Offset
Plate Processor
MAX PROCESSING WTDTH 660/860/1150 MM
MIN PROCESSING LENGTH 450 MM
PLATE THICKNESS 0.15-0.40 MM
DEVELOPER TANK CAPACITY 15 LIT
PLATE PROCESSING SPEED 50 - 200 CM/MIN
DEVELOPER REPLENISHMENT AREA / PER PLATE / LEVEL BASED
CHILLER STANDARD
DEVELOPER TEMPERATURE 18-35C+/-2C
DRIER TEMPERATURE ROOM TEMPERAUTE - 70 C
FRONT PANEL LCD DISPLAY
DEVELOPER TANK DIP TANK WITH SUBMERGED BRUSH
MODEL DIMENSION (mm) PROCESSING POW ER REOUIREM ENT GROSS WT
WIDTH (mm)
DPX 660 1270X2600X1190 660mm 220 V 50/60 HZ, 3 KW 275 Kgs
DPX 860 1470X2600X1190 860mm 220 V 50/60 HZ, 3 KW 300 Kgs

19. Thermal CTP
Plate Processor
 The CPX Thermal Plate Processor is an
economical, robust and easy to use
processor for all kinds of Thermal plates.
The polypropylene tank construction is
corrosion resistant and easy on
maintenance.
 Some special user friendly features like
auto clean, fluid handling system and
plate program are incorporated. A
software diagnostic package provides
faster service. Parameters for all leading
plate brands can be pre-programmed and
stored in memory.

20. Thermal CTP
Plate Processor
MAX PROCESSING WIDTH 860 MM
MIN PROCESSING LENGTH 450 MM
PLATE THICKNESS 0.15-0.40 MM
DEVELOPER TANK CAPACITY 38 LIT
PLATE PROCESSING SPEED 20 - 200 CM/MIN
DEVELOPER REPLENISHMENT AREA / PER PLATE / LEVEL BASED
CHILLER STANDARD
DEVELOPER TEMPERATURE 18-35C+/-2C
DRIER TEMPERATURE ROOM TEMPERAUTE - 70 C
MICROPROCESSOR BASED PLATE PROGRAMMING FACILITY
FRONT PANEL LCD DISPLAY
DEVELOPER TANK TWIN BRUSH ADJUSTABLE
FINISHER RECYLABLE
WASH SECTION BRUSH FOR PLATE WASH
FLUID HANDLING SYSTEM WASH AND CLEAN
MODEL DIMENSION (mm) PROCESSING- POWER REQUIREMENT GROSS WT
WIDTH (mm)
CPX 660 1540X1070X1050 660mm 220 V 50/60 HZ, 50A 350 Kgs
CPX 860 1540X1270X1050 860 mm 220 V 50/60 HZ, 50A 400 Kgs

21. Violet/Photopolymer
CTP Plate Processor
 The VPX Violet Photopolymer plate
processor is state of the art processor for
all kinds of photopolymer plates. The
polypropylene tank construction is
corrosion resistant and easy on
maintenance. Easy to remove roller
system helps maintain the equipment. The
pre-heat section is accurate to +/- 2C
using infrared ceramic heaters. Special fan
spray in the wash section ensures a clean
plate on exit.

22. Violet/Photopolymer
CTP Plate Processor
MIN PROCESSING LENGTH 350 MM
PLATE THICKNESS 0.15-0.40 MM
PRE HEAT TEMPERATURE ROOM TEMPERATURE - 120 C
PRE WASH BRUSH & WATER @ 2.5 BAR
DEVELOPER TANK CAPACITY 24 LIT
PLATE PROCESSING SPEED 120 CM/MIN (19 SEC DWELL TLME)
DEVELOPER REPLENISHMENT AREA / PER PLATE / LEVEL BASED
DEVELOPER TEMPERATURE 18-35C+/-0.5C
MICROPROCESSOR BASED PLATE PROGRAMMING FACILITY
FRONT PANEL LCD DISPLAY
FINISHER RECYLABLE
WASH SECTION FAN SPRAY @, 2.5 BAR
MODEL DIMENSION PROCESSING POWER REQUIREMENT GROSS WT
(mm) WIDTH (mm)
VPX 660 1880X1150X1400 660mm 220 V 50/60 HZ, 50A 525 Kgs
VPX 860 1880X1350X1400 860mm 220 V 50/60 HZ, 50A 600 Kgs

23. Inline Flexo
Processor
 The FPX Inline Flexo Processor is designed
for the washout treatment of flexography
photopolymer plates. The equipment is
completely enclosed to minimize exposing
operators to the chemical fumes and also
is provided with a built-in exhaust. It
allows usage of all types of solvents like
perchloroethylene and derivatives. The
unique combination of flat and rotary
brushes gives the best of both processes.

24. Inline Flexo
Processor
MAX PLATE SIZE 900 X 1016 mm ( 35.4" X 40")
CONNECTIVITY HIGH SPEED I2C
BRUSH TYPE FLAT AND ROTARY COMBINATION
SOLVENT TYPE OPTION TO WORK WITH DIFFERENT SOLVENTS
TANK CAPACITY OPTION TO WORK WITH TWO DIFFERENT TANK
CAPACITIES
FAULT INDICATION AUDIO VISUAL. ALARM
COUNTERS HOUR COUNTER AND PLATE COUNTER
CLEANING FEATURE SELF CLEANING WITH FRESH SOLVENT
DRIVE SPEED 4 - 40 CMS/MIN
PLATE LENGTH INDICATOR IN Cms
CHEMICAL LEVEL CONTROLED WITH SENSORS
MAX PLATE THICKNESS 7 mm
MAX PLATE SIZE 900X1016 mm
WASHOUT TANK CAPACITY 80 LIT
OVERALL DIMENSION 2620 XI 540X1165 mm
WEIGHT 650 Kgs
ELECTRICAL SPEC 220 v, 50/60 Hz, 20A

25. Flexo Exposure, Drier
And Light Finisher
 The EDLF (Exposure, Drier and Light
Finisher) is yet another master piece for
perfect exposure and finishing of
Flexography plates. With bearing slides on
drier racks, careen sheet, and special
matt sheet for the vacuum bed, its quality
all the way. The lamp fault indicator stops
all plate wastage. The light finisher is on
easy slide drawer with the power pack
hatch on the back for easy servicing.

26. Flexo Exposure, Drier
And Light Finisher
EXPOSURE LAMPS 80 W UVA
LIGHT FINISHING LAMPS 36WUVC
DRIER HEATER WATTAGE 4KW
DRIER TEMPERATURE 60 DEG C
VACUUM PUMP MAINTENANCE FREE
PROGRAMMING MICROPROCESSOR BASED MEMORY CHANNEL
MANUAL CONTROLS PROVIDED ADDITIONALLY FOR MAIN, BACK
EXPOSURE AND FINISHER
FAULT INDICATORS LED FAULT INDICATORS FOR INDIVIDUAL LAMPS
TECHNICAL DATA EDLF 3040 EDLF 3648
MAX PLATE SIZE 762X1016 mm 914X1220 mm
UVALAMP 16 X 10R 80W 20 XI OR 80W
UVCLAMP 13XTUV36W 15XTUV36W
OVERALL DIMENSION . 1475X1640 XI 145 mm 1625X1840 XI 145 mm
WEIGHT 300 Kgs 400 Kgs
ELECTRICAL SPEC 220 v, 50/60 Hz, 40A 220 v, 50/60 Hz, 45A

27. Color Proofing Table
 CK 2536 PROOF LITE
 FOR COLOUR PROOFING
 PLATE INSPECTION
 Max Plate Size 25x36”
 6500 K Cool Day Light
 CRI Maintained @90
 Asymmetrical Reflectors
 Imported Reflectors
 Cooling For Lamp Life
 Hour Counter
 Lamp Change Indicator
 4 Drawers for Storage

28. Single Vend
Newspaper Vending Machine
 Intelligent-Special toggle for Weekday and
Weekend pricing
 Maintenance free
 Layman stacking ease
 Separate coin box for independent
collections
 NO STOCK annunciation-load & clear
 WELL LIT ADD-ON BILL BOARDS
 Capacity – 50-75 copies
 Built-in sensor for varying stock thickness
 Light barrier enabled paper dispenser
 Maximum size – 280 x 350 mm
 50,000 hours of active signage
 Precise pulse recognition of coins
OPTIONS
 Currency to coin changers
 Verifiable circulation data collection with
microprocessor based USB retrieval
 Smart Card, loyalty reward programs

29. G5 Press
 G5 is a variable cut off press for semi
commercial and security printing jobs like
book covers, cheques, lottery tickets,
wrappers, OMR forms, computer forms &
much more.
 The print unit is capable of accepting wet
offset, dry offset, letterpress, numbering
and flexo printing inserts for different
repeat lengths.
 Straight pass web gives set-off free print
results. The web can be threaded
alternatively for interdeck UV drying while
printing on coated stocks. Continuous
dampening (Dahlgren type) adds to the
brilliance of print.
 With an unmatched repeat range and a
large spectrum of stock thicknesses that
can be accommodate; this press coupled
with multiple delivery options is a true
winner!

30. Elegance
Business Forms Press
 The requirement for computer forms is no
longer standard - it comes in an unlimited
configuration of shapes, sizes and colours.
Check out the huge inventory of invoices,
tickets, cheques, pay slips, share
certificates, application forms or EZR
stock forms at almost any commercial
establishment and you would know.
 Elegance lets you handle mind-boggling
combinations with superlative ease -
allowing you to cater to variable print runs
- from micro to macro - facilitating quick
changes of form-length, colour, plate and
paper.
 More importantly, the variable
circumference is customised to your
configuration of wet offset, dry offset,
letterpress printing or a combination to
suit market requirements of varying runs
with low wastage.

31. Rotary Forms
Converter
 A compact machine for producing stock
forms in single color (numbering & logo
can be in different color).
 The paper reel is unwound in the unwind
unit which incorporates an automatic
tension control and length control. It
then passes on into the printing unit
where printing is done on one side.
Further on, in the processing unit, the
paper is perforated (across and along it's
length), sprocket punched and then
zigzag folded to produce packets of
continuous forms.
 Very simple to operate, this machine has
all the features to produce a full
featured stock form. The printing unit is
letterpress based and change of print
repeats is quick and convenient.

32. Ecoflex
 Ecoflex is a narrow web flexo press for
printing labels, tags, flexible packaging,
cartons, etc. Its modular design and precise,
rigid construction provide the versatility and
reliability necessary for the most difficult
jobs.
 The Multitec Ecoflex flexography press can be
assembled to your specifications in various
widths. A full range of options further
enhances the versatility of the Ecoflex label
press and its ability to handle a variety of
applications on a broad range of materials.
 The Ecoflex is constructed to provide a
superior foundation for quality printing and
converting. It has full dual side frames to
create a solid and rigid structure not
attainable with partial frames supported on
sheet metal legs or with cantilevered designs.
 Consistent, repeatable quality printing is
facilitated by the ease of operating the
Ecoflex. Precise print adjustments are made
quickly, even when changing material caliper.
Anilox rolls can be changed quickly even after
the job is set up, and the closed loop tension
system provides exact and repeatable control
at the operator selected tension level.

33. Multiflex
 Take a giant leap in technology with
Multiflex - a narrow web flexo press suited
for production of FMCG / Pharma / Brewery
labels, packaging products, etc.
 The Multiflex flexographic printing press
can take care of your production of prime
labels, cartons, and many other products.
 Various in-line options like hot foil
stamping, embossing, delam-relam, etc
makes this press a true winner.
 Various delivery options - rewinder,
sheeter-stacker or zigzag folder - all are
possible to give you an unmatched
productivity with flexibility of quick change
between your various production programs.

34. Label Converter
 The Label converter is a compact machine
for producing simple labels. It can cater to
the production of barcode, price, marking,
addressing and other stock labels.
 The Label Converter has several in-line
converting options like die-cutting and
waste matrix rewinding, perforating,
sprocket hole punching, etc. It can also
have a flexo printing unit.
 Modular design enables extension from a
basic startup machine to a full fledged
narrow web label printing solution.
 Delivery options include roll to roll
production, roll to sheet or roll to zigzag
fold.

35. Precision Sheeter
 Cut-size sheeting lines for A4, A3, FS, etc.
sized sheeting. Auto-cycle based
production where you just set in the batch
size and the machine does the rest.
Batches of the specified no. of sheets are
separated and are ready to be packed.
 Minimum wastage ensures higher
profitability than guillotine cut where all
four sides of the big sheets have to be
finished.

36. Narrow Width Slitter
 To make narrow width products in reel
form from pre-printed / stock reels (for
example ATM, POS, cash register rolls,
etc.).
 Also to inspect & doctor pre-printed reels.

37. Baling Press
 An investment that will pay for itself in a
short span of time and keep the sea of
waste paper from engulfing your
efficiency.
 Considering the economy in transport
costs and the resultant saving, can you
afford not to buy one?
 Works for paper, corrugated board,
printer's waste and film, etc

38. Slitter Rewinder
For Stock Reels
 Save expensive paper that has been
damaged during transit or has got out of
shape during loading / unloading and
will not let you run your web press at
the desired high speeds.
 Join those reel ends you always thought
were scrap and get a workable reel out
of it.
 And of course, slit stock reels to
different sizes to cater to the variety of
jobs that involve different web widths.
 Model ZM is for web width of 40" and
Model ZL is for 63" web width. Both of
these machines have a center drive
system on the finished reel. For higher
web widths, we have Drum Type
Rewinder that work on surface drive
systems.

39. Collator
 A simple and easy to operate machine for
making multiple part computer
(continuous) forms with or without
interleaved carbon paper.
 The web travels with the help of pin-feeder
and gets crimped at an interval of 4".
 A perfect companion for your forms press.

40. Video Plate Mounter
 Video Plate Mounter for easy and quick
mounting of flexo and letterpress plates.
 High resolution camera, monitor LCD TFT
 Accurate liner rail ensures mounting
accuracy
 Movable plate cylinder holder
 Available for mounting on sleeve
 Fast and easy mounting process, improve
productivity
 For flexo press and rotary letterpress.
Also available for plate mounting for
wide-web printing.

41. Contact us
For more information, please write to us at:
PERFECT GRAPHICS PVT LTD
1844/10 Govindpuri Extension, Kalkaji
New Delhi – 110 019, India
Phone: +91.11.26025372, 26025468
Fax: +91.11.26025468
Email: info@pg-pl.in & perfectgraphics@gmail.com
Web Site: www.pg-pl.com