1. Casting

2. The flask
cope
The flask is when
the cope and the
drag are in place
together.
Parting powder can be
pattern used to help separate
the pattern from the
sand.
green
drag sand
S.Watson

3. Pattern Tapered sides
Rounded edges
S.Watson

4. Runner and Riser
runner riser
S.Watson

5. Equipment
S.Watson

6. Safety
Aluminium is
melted to very high
temperatures so
safety is extremely
important.
Melting points:-
Aluminium approx:- 660 c 0
Steel approx:- 1330 c 0
S.Watson

7. Crucible
The crucible is
preheated. This
removes any moisture
from the furnace and
crucible.
S.Watson

8. Charging with Aluminium
Aluminium ingots
are added.
S.Watson

9. Adding Flux
Flux prevents
oxygen entering the
molten aluminium.
If oxygen does
enter the aluminium
the final mould can
contain bubbles
which ruin the
finish.
S.Watson

10. Degassing tablet
This removes any
impurities, in the
form of gas.
The gas fumes can
be very dangerous.
S.Watson

11. Pyrometer
When the
temperature
0
reaches 650 c it’s
ready for pouring
S.Watson

12. Pyrometer
S.Watson

13. ‘Dross’
Before pouring the
‘dross’ is removed.
This is all the
impurities which
have risen to the
top.
S.Watson

14. Lifting tongs
S.Watson

15. Pouring
Great care is
needed as the
molten aluminium is
extremely hot.
S.Watson

16. Pouring
The molten
aluminium is
poured in the
runner.
When the empty
cavity is full the
aluminium rises up
the riser.
S.Watson