1. STEEL DOORS 416 420 424 430
Product Line
INSULATED STEEL DOORS 418 422 426 432
INDUSTRY LEADING
COMMERCIAL & INDUSTRIAL SOLUTIONS
2. Sectional Steel Door Selection – A Solid Choice for Reliability and Durability
THE TURNKEY SOURCE FOR COMMERCIAL AND INDUSTRIAL SOLUTIONS AND SERVICE
Selection of Overhead Door products automatically includes the unequaled expertise and experience of
Overhead Door Ribbon Distributors. Nationwide coverage by our 400+ Ribbon Distributors is unique in our
industry – providing a single source for design and application consulting, installation, service and ongoing main-
tenance. Turnkey services to maximize the lasting value of your product choice. Your Overhead Door Distributor
is also your only source for a full line of commercial and industrial door and operator systems specifically
designed for integrated applications. For over four generations, our 400+ Ribbon
Distributors have been committed to providing commercial and industrial door solu-
tions. Combined with Overhead Door product design and manufacturing superiority,
our distributors are a proud part of the Overhead Door family, sharing our name, our
Ribbon logo and our commitment to industry leading innovation and excellence.
CONTENTS
Intro to Sectional Steel and Insulated Extra Heavy-Duty Insulated Sectional
Sectional Steel 2 -3 Steel Doors–Series 418 12-13
Sectional Steel and Insulated Heavy-Duty Insulated Sectional
Sectional Steel Comparison Chart 4 -5 Steel Doors–Series 422 426 14-15
Extra Heavy-Duty Sectional Steel Doors Medium-Duty Insulated Sectional
Series 416 6 -7 Steel Doors–Series 432 16 -17
Heavy-Duty Sectional Steel Doors Track Detail 18
Series 420 424 8-9
Framing & Pads Detail 19
Medium-Duty Sectional Steel Doors
Series 430 10 -11 Electric Operators 20-21
1-800-887-DOOR
3. Sectional SteelDoor Systems
Overhead Door Corporation’s comprehensive line of sectional steel and insulated steel doors
encompasses one of the industry’s most complete selection of panel profiles, gauges, track styles
and hardware for commercial sectional door systems. Our sectional steel door systems are
designed to satisfy the spectrum of opening sizes, field conditions and aesthetic requirements for
a host of commercial and industrial applications, including applications requiring thermal perform-
ance. The insulated steel doors provide R-values up to 11.69 (2.06 W/Msq) to meet various
insulating requirements. Engineered and manufactured for excellence, and backed by the best service
company and dedicated distributor network in the industry, Overhead Door Corporation’s sectional
steel doors are an outstanding choice for durability, serviceability and long-lived performance.
Installation and Service: Overhead Door Company of Madison
overhead door corporation 1
4. Sectional Steel and Insulated Steel Doors
Overhead Door Corporation offers a wide • Option of insulated steel doors provides enhanced thermal
selection of sectional steel and insulated steel efficiency and R-values up to 11.69 (2.06 W/Msq)*
doors to satisfy applications where durability, • Baked-on, polyester paint finish eliminates field painting
and provides long-lasting protection against the elements
reliability and economy are top priorities. An
• Superior panel strength and well-engineered track design
array of door panel profiles, tracks and hard- meets windload requirements and codes
ware, and specialized options allows you to
Specialized Options for Customized Solutions
further customize these doors to your specific
• Full-section or individual-panel glazing satisfies requirements
project requirements.
for external light and visitor identification
• Higher-cycle springs in optional 25k, 50k, 75k or 100k-cycles
promote long-life in high-usage applications
GENERAL FEATURES AND BENEFITS • Optional steel strutting provides reinforcement for structural
Solidly Constructed for Reliable Performance
integrity on wider doors
• Other options include: electric and chain hoist operation,
• 16, 20, or 24-gauge steel door panels results in a solidly
aluminum sash sections with choice of DSB, plexiglas,
constructed door for years of dependable service
polycarbonate, tempered, or wire glazing, as well as movable
• Standard steel doors available in sizes up to 32'2" (9804 mm)
center posts, 3" (76 mm) track , Sup-UR-Seal jamb seals
in width and 24'1" (7336 mm) in height
• Insulated steel doors available in up to 32'2" (9804 mm) in Built to Last
width and 24'1" (7336 mm) in height • Top-quality materials, excellent field service and optional
• Heavy-duty track and hardware are fabricated of high-quality maintenance program contribute to extended door life,
galvanized steel and engineered for precise, trouble-free low maintenance costs and maximum productivity
performance
* If a higher R-value is required, ask your Overhead Door Distributor about the Thermacore ®
• Flexible PVC bottom weatherseal with retainer lessens Door System.
conductivity of heat and cold, minimizes air and water
penetration, and accommodates irregular floor conditions
Steel Doors Insulated Steel Doors
Panel Detail Panel Detail
416 Series 420 424 430 Series 418 Series 422 426 432 Series
2
5. Sectional SteelDoor Systems
Installation and Service: Overhead Door Company of Dallas-Commercial
overhead door corporation 3
8. Extra Heavy– Duty Sectional Steel Doors
SERIES 416
Standard Features At a Glance The 416 Series is manufactured of 16-gauge,
flush, galvanized steel exterior for enhanced
Nominal thickness 2" (51 mm) strength and durability. These 2" (51 mm)
Maximum standard width 32'2" (9804 mm)
thick doors are available in sizes up to
Maximum standard height 21'1" (6426 mm)
Exterior steel 16-gauge hot-dipped 32'2" in width and 21'1" in height (9804
galvanized steel mm and 6426 mm). Available with an array
Exterior surface Flush of options, the 416 Series can be easily
End stiles 16-gauge steel customized to meet any project require-
Center stiles 16-gauge steel ment where an extra-heavy-duty door is
Standard mounting Angle mount
required.
Standard track 2" (51 mm)
Standard springs 10,000 cycle
Weatherstripping Flexible PVC bottom
with retainer ARCHITECTURAL SPECIFICATIONS* 416
Operation Manual pull rope
Finish White baked-on PART 1 GENERAL
polyester
1.01 Work Included
Lock Interior-mounted
The doors will be 416 Series as manufactured by
slide lock
Overhead Door Corporation.
Options 1.02 Related Work
Opening preparation, miscellaneous or structural metal
• Electric operator or chain hoist
work, access panels, finish or field painting, field electri-
• Bottom sensing edge
cal wiring, wire, conduit, fuses and disconnect switches
• Full sash section with 1/8" (3 mm) DSB, insulated;
are in the Scope of Work of other divisions or trades.
1/8" (3 mm) and 1/4" (6 mm) plexiglass
• Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm) 1.03 Quality Assurance
and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4" In accordance with accepted quality assurance guidelines
(6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm) for motor-operated doors, both the door and electric
Tempered; 1/4" (6 mm) wired operator (optional) shall be manufactured by a single-
• 3" (76 mm) track source producer of door systems; as by Overhead Door
• Bracket mounting (not available on full vertical Corporation.
door tracks)
• Bottom sensing edge PART 2 PRODUCT
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles
• Exhaust ports 2.01 Sections
• Jamb weatherseals, Saverseal pliable blade seal and Section profile will be flush. Sections will be 16-gauge,
Therma-Flex seal roll-formed galvanized steel exterior. Sections will have a
• Bottom strips, including looped PVC weatherstrips, nominal thickness of 2" (51 mm). Doors will have rabbet-
flexible PVC astragal weatherstrips and double- ed meeting rails to form weathertight joints and provide
contact weatherstrips full-width interlocking structural rigidity.
• Reinforcing struts of roll-formed steel hat sections
2.02 Center and End Stiles
• Movable center posts for 2" (51 mm) or 3" (76 mm)
tracks that roll away, with automatic safety Center and end stiles will be 16-gauge steel, formed and
catches that prevent door closure when posts are fastened as integral structures with the rolled sections.
removed End stiles will be channel-shaped to 2" (51 mm) deep.
• Tumbler keyed lock
2.03 Springs
Standard springs will be 10,000 cycles. (Optional higher-
cycle 25,000, 50,000, 75,000, or 100,000-cycle springs).
6
9. Sectional SteelDoor Systems
SERIES 416
2.04 Hardware
Panel Schedule Section Schedule
Hinges and fixtures will be galvanized steel. Full-floating ball-
bearing rollers will have hardened steel races. Roller sizes will Door Width Number Door Height Number of
of Panels Sections
be adequate for design requirements and limitations.
to 10'2" 6'1" to 7'1"
(3099 mm) 2 (1854 mm to 3937 mm) 4
2.05 Track
10'3" to 12'2" 7'2" to 8'10"
Track is 2" (51 mm) standard (3" (76 mm) optional) angle- (3124 mm to 3708 mm) 3 (2184 mm to 2692 mm) 5
mounted. (Bracket-mounted track is an option, but not avail- 12'3" to 16'2"
4
8'11" to 10'7"
6
(3734 mm to 4928 mm) (2718 mm to 3226 mm)
able on full vertical doors).
16'3" to 19'2" 10'8" to 12'4"
(4953 mm to 5842 mm) 5 (3251 mm to 3759 mm) 7
2.06 Lock
19'3" to 22'2" 12'5" to 14'1"
(5867 mm to 6756 mm) 6 (3785 mm to 4293 mm) 8
Lock will be interior-mounted slide lock. (Optional tumbler
keyed lock is available.) 22'3" to 26'2" 14'2" to 15'10"
(6782 mm to 7976 mm) 8 (3438 mm to 4826 mm) 9
26'3" to 32'2" 15'11" to 17'7"
2.07 Weatherstrip (8001 mm to 9804 mm) 10 (4851 mm to 5359 mm) 10
Bottom weatherstrip will be flexible PVC and held in place by 17'8" to 21'1"
11
(5385 mm to 6426 mm)
a retainer that also provides additional reinforcement.
2.08 Finish
Finish will be factory baked-on white polyester coating.
2.09 Operation
Operation will be by manual pull rope. (Optional chain hoist
and electric operator are available.)
PART 3 EXECUTION
3.01 Execution
Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
Overhead Door Corporation distributor.
*Note to specifier: This specification is a suggested guide. Available options are shown in
parentheses.
overhead door corporation 7
10. Heavy– Duty Sectional Steel Doors
SERIES 420 424
Standard Features At a Glance
The 420 and 424 Series doors are designed
for heavy-duty use in a variety of commer-
Nominal thickness 2" (51 mm) cial and industrial applications. Both series
Maximum standard width 31'2" (9500 mm) (420 Series)
feature a 2" (51 mm) panel thickness, 16-
30'2" (9195 mm) (424 Series)
Maximum standard height 24'1" (7341 mm)
gauge steel intermediate and end stiles,
Exterior steel 20-gauge galvanized steel ribbed steel exterior and a white paint
(420 Series) finish. The 420 Series is a 20-gauge steel
24-gauge galvanized steel door available in sizes up to 31'2" in width
(424 Series) and 24'1" in height (9500 mm and 7341
Exterior surface Ribbed
mm). The 424 Series is available in sizes up
End stiles 16-gauge steel
Center stiles 16-gauge steel
to 30'2" in width and 24'1" in height (9195
Standard mounting Angle mount mm and 7341 mm), and is also available in
Standard track 2" (51 mm) Industrial brown. Numerous options —
Standard springs 10,000 cycle including weatherstripping, reinforcing
Weatherstripping Flexible PVC bottom struts, movable center posts, and motor
with retainer
operation — allow these heavy-duty doors
Operation Manual pull rope
Finish White baked-on polyester
to meet nearly any project requirement.
Lock Interior-mounted slide
lock
ARCHITECTURAL SPECIFICATIONS* 420 424
Options
PART 1 GENERAL
• Electric operator or chain hoist
• Bottom sensing edge 1.01 Work Included
• Full sash section with 1/8" (3 mm) DSB, insulated; The doors will be 420 or 424 Series as manufactured
1/8" (3 mm) and 1/4" (6 mm) plexiglass by Overhead Door Corporation.
• Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm)
1.02 Related Work
and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4"
Opening preparation, miscellaneous or structural metal
(6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm)
work, access panels, finish or field painting, field electri-
Tempered; 1/4" (6 mm) wired
cal wiring, wire, conduit, fuses and disconnect switches
• 3" (76 mm) track
are in the Scope of Work of other divisions or trades.
• Bracket mounting (not available on full vertical)
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles 1.03 Quality Assurance
• Exhaust ports In accordance with accepted quality assurance guidelines
• Jamb weatherseals, Saverseal pliable blade seal and for motor-operated doors, both the door and electric
Therma-Flex seal operator (optional) shall be manufactured by a single-
• Bottom strips, including looped PVC weatherstrips, source producer of door systems; as by Overhead Door
flexible PVC astragal weatherstrips and double-contact Corporation.
weatherstrips
• Reinforcing struts of roll-formed steel slat sections PART 2 PRODUCT
• Industrial brown polyester (424 Series only)
• Movable center posts for 2" (51 mm) or 3" (76 mm) tracks 2.01 Sections
that roll away, with automatic safety catches that Section profile will be ribbed. Sections will be 20-gauge
prevent door closure when posts are removed for 420 Series or 24-gauge for the 424 Series, roll-formed
• Tumbler keyed lock galvanized steel exterior. Sections will have a nominal
thickness of 2" (51 mm). Doors will have rabbeted meet-
ing rails to form weathertight joints and provide full-width
interlocking structural rigidity.
8
11. Sectional SteelDoor Systems
SERIES 420 424
2.02 Center and End Stiles
Panel Schedule Section Schedule
Center and end stiles will be 16-gauge steel, formed and fas-
tened as integral structures with the rolled sections. End stiles Door Width Number Door Height Number of
of Panels Sections
will be channel-shaped to 2" (51 mm) deep.
to 10'2" to 8'1"
(3099 mm) 2 (2464 mm) 4
2.03 Springs
10'3" to 12'2" 8'2" to 10'1"
Standard springs will be 10,000 cycles. (Optional higher-cycle (3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 5
25,000, 50,000, 75,000, or 100,000-cycle springs). 12'3" to 16'2" 10'2" to 12'1"
(3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6
2.04 Hardware 16'3" to 19'2" 12'2" to 14'1"
(4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7
Hinges and fixtures will be galvanized steel. Full-floating ball- 19'3" to 22'2" 14'2" to 16'1"
(5867 mm to 6756 mm) 6 (4318 mm to 4902 mm) 8
bearing rollers will have hardened steel races. Roller sizes will
be adequate for design requirements and limitations. 22'3" to 26'2" 16'2" to 18'1"
(6782 mm to 7976 mm) 8 (4928 mm to 5512 mm) 9
26'3" to 31'2"* 18'2" to 20'1"
2.05 Track (8001 mm to 9804 mm) 10 (5537 mm to 6121 mm) 10
Track is 2" (51 mm) standard (3" (76 mm) optional) angle- 26'3" to 30'2"**
10
20'2" to 22'1"
11
(8001 mm to 9195 mm) (6147 mm to 6731 mm)
mounted. (Bracket-mounted track is an option, but not avail-
22'2" to 24'1"**
able on full vertical doors). (6756 mm to 7341 mm) 12
2.06 Lock *420 Series **424Series
Lock will be interior-mounted slide lock. (Optional tumbler
keyed lock is available.)
2.07 Weatherstrip
Bottom weatherstrip will be flexible PVC and held in place by
a retainer that also provides additional reinforcement.
2.08 Finish
Finish will be factory baked-on white (Industrial brown
optional on 424 Series) polyester coating.
2.09 Operation
Operation will be by manual pull rope. (Optional chain hoist
and electric operator are available.)
PART 3 EXECUTION
3.01 Execution
Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
Overhead Door Corporation distributor.
*Note to specifier: This specification is a suggested guide. Available options are shown in
parentheses.
overhead door corporation 9
12. Medium – Duty Sectional Steel Doors
SERIES 430
Standard Features At a Glance The 430 Series sectional steel door in
available in sizes up to 20'2" in width and
Nominal thickness 2" (51 mm) 16'1" in height (6147 mm and 4902 mm)
Maximum standard width 20'2" (6147 mm)
for a variety of medium-duty applications.
Maximum standard height 16'1" (4902 mm)
Exterior steel Nominal 24-gauge These doors features a 2" (51 mm) panel
galvanized steel thickness and a nominal 24-gauge, ribbed,
Exterior surface Ribbed white galvanized steel exterior with 16-
End stiles 16-gauge steel gauge steel intermediate and end stiles.
Center stiles 16-gauge steel (Industrial brown is available) The 430
Standard mounting Angle mount
Series is customizable to any project speci-
Standard track 2" (51 mm)
Standard springs 10,000 cycle fication with a variety of additionally avail-
Weatherstripping Standard on bottom able options.
Operation Manual pull rope
Finish White baked-on polyester
Lock Interior-mounted slide ARCHITECTURAL SPECIFICATIONS* 430
lock
PART 1 GENERAL
Options
1.01 Work Included
• Electric operator or chain hoist The doors will be 430 Series as manufactured by
• Full sash section with 1/8" (3 mm) DSB, insulated; Overhead Door Corporation.
1/8" (3 mm) and 1/4" (6 mm) plexiglass
1.02 Related Work
• Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm)
and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4" Opening preparation, miscellaneous or structural metal
(6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm) work, access panels, finish or field painting, field electri-
Tempered; 1/4" (6 mm) wired cal wiring, wire, conduit, fuses and disconnect switches
• Industrial brown polyester are in the Scope of Work of other divisions or trades.
• 3" (76 mm) track
1.03 Quality Assurance
• Bracket mounting (not available on full vertical)
In accordance with accepted quality assurance guidelines
• Bottom sensing edge
for motor-operated doors, both the door and electric
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles
operator (optional) shall be manufactured by a single-
• Exhaust ports
source producer of door systems; as by Overhead Door
• Jamb weatherseals, Saverseal pliable blade seal and
Corporation.
Therma-Flex seal
• Bottom strips, including looped PVC weatherstrips,
PART 2 PRODUCT
flexible PVC astragal weatherstrips and double-contact
weatherstrips 2.01 Sections
• Reinforcing struts of roll-formed steel hat sections Section profile will be ribbed. Sections will be nominal 24-
• Movable center posts for 2" (51 mm) or 3" (76 mm) gauge, roll-formed galvanized steel exterior. Sections will
tracks that roll away, with automatic safety catches have a nominal thickness of 2" (51 mm). Doors will have
that prevent door closure when posts are removed rabbeted meeting rails to form weathertight joints and
• Tumbler keyed lock provide full-width interlocking structural rigidity.
2.02 Center and End Stiles
Center and end stiles will be 16-gauge steel, formed and
fastened as integral structures with the rolled sections.
End stiles will be channel-shaped to 2" (51 mm) deep.
2.03 Springs
Standard springs will be 10,000 cycles. (Optional higher-
cycle 25,000, 50,000, 75,000, or 100,000-cycle springs).
10
13. Sectional SteelDoor Systems
SERIES 430
2.04 Hardware PART 3 EXECUTION
Hinges and fixtures will be galvanized steel. Full-floating ball-
3.01 Execution
bearing rollers will have hardened steel races. Roller sizes will
be adequate for design requirements and limitations. Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
2.05 Track Overhead Door Corporation distributor.
Track is 2" (51 mm) standard (3" (76 mm) optional) angle-
*Note to specifier: This specification is a suggested guide. Available options are shown in
mounted. (Bracket-mounted track is an option, but not avail- parentheses.
able on full vertical doors).
2.06 Lock
Lock will be interior-mounted slide lock. (Optional tumbler Panel Schedule Section Schedule
keyed lock is available.)
Door Width Number Door Height Number of
of Panels Sections
2.07 Weatherstrip
Bottom weatherstrip will be flexible PVC and held in place by 8'0"to 10'2" to 8'1"
(2438 mm to 3099 mm) 2 (2464 mm) 4
a retainer that also provides additional reinforcement. 10'3" to 12'2" 8'2" to 10'1"
(3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 5
2.08 Finish 12'3" to 16'2" 10'2" to 12'1"
(3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6
Finish will be factory baked-on white (Industrial brown
16'3" to 19'2" 12'2" to 14'1"
option) polyester. (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7
19'3" to 20'2" 14'2" to 16'1"
(5867 mm to 6147 mm) 6 (4318 mm to 4902 mm) 8
2.09 Operation
Operation will be by manual pull rope. (Optional chain hoist
and electric operator are available.)
overhead door corporation 11
14. Extra Heavy– Duty Insulated Sectional Steel Doors
SERIES 418
Standard Features At a Glance
The 418 Series is a high-quality, heavy-duty
insulated door that provides protection
Nominal thickness 2" (51 mm) against heat and cold environments.
Maximum standard width 32'2" (9804 mm)
Maximum standard height 21'1" (6426 mm) Fabricated of 16-gauge, flush galvanized
Exterior steel 16-gauge galvanized steel exterior and 26-gauge steel back
steel cover, these 2" (51 mm) thick doors offer
Back cover 26-gauge galvanized
the choice of expanded polystyrene or
steel (poly-backed, HIPS-
backed optional) isocyanurate insulation for R-value’s up to
Insulation Expanded polystyrene 11.69 (2.06 W/Msq). A wide array of
(standard) options allows these doors to meet the
Isocyanurate (optional)
R-value
most stringent project requirements that
Polystyrene 7.35 (1.29 W/Msq) call for a degree of thermal efficiency.
Isocyanurate 11.69 (2.06 W/Msq)
Exterior surface Flush
End stiles 16-gauge steel ARCHITECTURAL SPECIFICATIONS* 418
Center stiles 16-gauge steel
Standard mounting Angle mount
Standard track 2" (51 mm) PART 1 GENERAL
Standard springs 10,000 cycle
1.01 Work Included
Weatherstripping Standard on bottom
Operation Manual pull rope The doors will be 418 Series as manufactured by
Finish White baked-on polyester Overhead Door Corporation.
Lock Interior-mounted slide lock
1.02 Related Work
Opening preparation, miscellaneous or structural metal
Options
work, access panels, finish or field painting, field electri-
• Electric operator or chain hoist cal wiring, wire, conduit, fuses and disconnect switches
• Bottom sensing edge are in the Scope of Work of other divisions or trades.
• Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm)
insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass 1.03 Quality Assurance
• Individual lites with 1/2" insulated DSB In accordance with accepted quality assurance guidelines
• 3" (76 mm) track for motor-operated doors, both the door and electric
• Bracket mounting (not available on full vertical operator (optional) shall be manufactured by a single-
(door tracks) source producer of door systems; as by Overhead Door
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles Corporation.
• Exhaust ports
• Jamb weatherseals, Saverseal pliable blade seal and PART 2 PRODUCT
Therma-Flex seal
• Bottom strips, including looped PVC weatherstrips, 2.01 Sections
flexible PVC astragal weatherstrips and double-contact
Section profile will be flush. Sections will be 16-gauge,
weatherstrips
roll-formed galvanized steel exterior. Sections will have a
• Reinforcing struts of roll-formed steel hat sections
• Movable center posts for 2" (51 mm) or 3" (76 mm) nominal thickness of 2" (51 mm). Doors will have rabbet-
tracks that roll away, with automatic safety catches ed meeting rails to form weathertight joints and provide
that prevent door closure when posts are removed full-width interlocking structural rigidity. Back cover will
• Tumbler keyed lock be 26-gauge steel. (poly-backed, HIPS-backed optional)
2.02 Insulation
Insulation will be polystyrene with an R-value of 7.35 (1.29
W/Msq) (Optional isocyanurate insulation with an R value of
12
15. Sectional SteelDoor Systems
SERIES 418
11.69 or 2.06 W/Msq). Finish will be factory baked-on white polyester coating.
2.03 Center and End Stiles 2.10 Operation
Center and end stiles will be 16-gauge steel, formed and fas- Operation will be by manual pull rope. (Optional chain hoist
tened as integral structures with the rolled sections. End stiles and electric operator are available.)
will be channel-shaped to 2" (51 mm) deep.
PART 3 EXECUTION
2.04 Springs
Standard springs will be 10,000 cycles. (Optional higher-cycle 3.01 Execution
25,000, 50,000, 75,000, or 100,000-cycle springs). Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
2.05 Hardware
Overhead Door Corporation distributor.
Hinges and fixtures will be galvanized steel. Full-floating ball-
bearing rollers will have hardened steel races. Roller sizes will *Note to specifier: This specification is a suggested guide. Available options are shown in
parentheses.Schedule
Panel Section Schedule
be adequate for design requirements and limitations.
Door Width Number Door Height Number of
of Panels Sections
2.06 Track
to 10'2" 6'1" to 7'1"
Track is 2" (51 mm) standard (3" (76 mm) optional) angle- (3099 mm) 2 (2591 mm) 4
mounted. (Bracket-mounted track is an option, but not avail- 10'3" to 12'2" 7'2" to 8'10"
(3124 mm to 3708 mm) 3 (2616 mm to 3073 mm) 5
able on full vertical doors).
12'3" to 16'2" 8'11" to 10'7"
(3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6
2.07 Lock
16'3" to 19'2" 10'8" to 12'4"
Lock will be interior-mounted slide lock. (Optional tumbler (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7
keyed lock is available.) 19'3" to 22'2" 12'5" to 14'1"
(5867 mm to 6756 mm) 6 (3099 mm to 3683 mm) 8
2.08 Weatherstrip 22'3" to 26'2" 14'2" to 15'10"
(6782 mm to 7976 mm) 8 (3099 mm to 3683 mm) 9
Bottom weatherstrip will be flexible PVC and held in place by 26'3" to 32'2" 15'11" to 17'7"
(7925 mm to 9195 mm) 10 (3099 mm to 3683 mm) 10
a retainer that also provides additional reinforcement.
17'8" to 21'1"
(3099 mm to 3683 mm) 11
2.09 Finish
Installation and Service: Overhead Door Company of Madison
overhead door corporation 13
16. Heavy– Duty Insulated Sectional Steel Doors
SERIES 422 426
Standard Features At a Glance The 422 and 426 Series doors are ideal
for heavy-duty applications requiring pro-
Nominal thickness 2" (51 mm) tection against the elements. These doors
Maximum standard width 29'2" (8890 mm) (422 Series)
feature a 2" (51 mm) panel thickness, 16-
28'2" (8585 mm) (426 Series)
Maximum standard height 24'1" (7341 mm) gauge steel intermediate and end stiles,
Exterior steel 20-gauge galvanized steel ribbed steel exterior and 26-gauge steel
(422 Series) back cover in a white finish. Polystyrene
24-gauge galvanized steel
(426 Series) insulation (R-value of 7.35 or 1.29 W/Msq)
Back cover 26-gauge galvanized steel is standard, and isocyanurate insulation,
(poly-backed, HIPS- with an R-value of 11.69 (2.06 W/Msq) is an
backed optional)
option. The 422 Series is a 20-gauge steel
Insulation Expanded polystyrene
(standard) door available in sizes up to 29'2" in width
Isocyanurate (optional) and 24'1" in height (8890 mm and 7341
R-value mm). The 426 Series is available in sizes up
Polystyrene 7.35 (1.29 W/Msq)
to 28'2" in width and 24'1" in height (8585
Isocyanurate 11.69 (2.06 W/Msq)
Exterior surface Ribbed mm and 7341 mm), and is also offered in
End stiles 16-gauge steel Industrial brown. A multitude of options —
Center stiles 16-gauge steel including reinforcing struts, movable center
Standard mounting Angle mount
Standard track 2" (51 mm) posts, and motor operation — allow these
Standard springs 10,000 cycle insulated heavy-duty doors to be used in a
Weatherstripping Standard on bottom variety of commercial and industrial envi-
Operation Manual pull rope
ronments.
Finish White baked-on polyester
Lock Interior-mounted slide lock
Options
ARCHITECTURAL SPECIFICATIONS* 422 426
• Electric operator or chain hoist PART 1 GENERAL
• Bottom sensing edge
• Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm) 1.01 Work Included
insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass The doors will be 422 or 426 Series as manufactured by
• Individual lites with 1/2" insulated DSB Overhead Door Corporation.
• Industrial brown polyester (426 Series only)
• 3" (76 mm) track 1.02 Related Work
• Bracket mounting (not available on full vertical) Opening preparation, miscellaneous or structural metal
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles work, access panels, finish or field painting, field electri-
• Exhaust ports cal wiring, wire, conduit, fuses and disconnect switches
• Jamb weatherseals, Saverseal pliable blade seal and
are in the Scope of Work of other divisions or trades.
Therma-Flex seal
• Bottom strips, including looped PVC weatherstrips, 1.03 Quality Assurance
flexible PVC astragal weatherstrips and double-contact
In accordance with accepted quality assurance guidelines
weatherstrips
for motor-operated doors, both the door and electric
• Reinforcing struts of roll-formed steel hat sections
• Movable center posts for 2" (51 mm) or 3" (76 mm) tracks operator (optional) shall be manufactured by a single-
that roll away, with automatic safety catches that prevent source producer of door systems; as by Overhead Door
door closure when posts are removed Corporation.
• Tumbler keyed lock
PART 2 PRODUCT
2.01 Sections
Section profile will be ribbed. Sections will be
20-gauge for the 422 Series or 24-gauge for the 426 Series
14
17. Sectional SteelDoor Systems
SERIES 422 426
roll-formed galvanized steel exterior. Sections will have a nom-
inal thickness of 2" (51 mm). Doors will have rabbeted meeting Panel Schedule Section Schedule
rails to form weathertight joints and provide full-width inter- Door Width Number Door Height Number of
of Panels Sections
locking structural rigidity. Back cover will be 26-gauge steel.
(poly-backed, HIPS-backed optional) to 10'2" to 8'1"
(3099 mm) 2 (2464 mm) 4
10'3" to 12'2" 8'2" to 10'1"
(3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 5
2.02 Insulation 12'3" to 16'2" 10'2" to 12'1"
(3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6
Insulation will be polystyrene with an R-value of 7.35 (1.29
16'3" to 19'2" 12'2" to 14'1"
W/Msq) (Optional isocyanurate insulation with an R value of (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7
11.69 or 2.06 W/Msq). 19'3" to 22'2" 14'2" to 16'1"
(5867 mm to 6756 mm) 6 (4318 mm to 4902 mm) 8
2.03 Center and End Stiles 22'3" to 26'2" 16'2" to 18'1"
(6782 mm to 7976 mm) 8 (4928 mm to 5512 mm) 9
Center and end stiles will be 16-gauge steel, formed and fas- 26'3" to 29'2"* 18'2" to 20'1"
(8001 mm to 8890 mm) 10 (5537 mm to 6121 mm) 10
tened as integral structures with the rolled sections. End stiles
will be channel-shaped to 2" (51 mm) deep. 26'3" to 28'2"** 20'2" to 22'1"
(8001 mm to 8534 mm) 10 (6147 mm to 6731 mm) 11
2.04 Springs 22'2" to 24'1"
(6756 mm to 7341 mm) 12
Standard springs will be 10,000 cycles. (Optional higher-cycle
25,000, 50,000, 75,000, or 100,000-cycle springs). *422 Series **426 Series
2.05 Hardware
Hinges and fixtures will be galvanized steel. Full-floating ball-
bearing rollers will have hardened steel races. Roller sizes will
be adequate for design requirements and limitations.
2.06 Track
Track is 2" (51 mm) standard (3" (76 mm) optional) angle-
mounted. (Bracket-mounted track is an option, but not avail-
able on full vertical doors).
2.07 Lock
Lock will be interior-mounted slide lock. (Optional tumbler
keyed lock is available.)
2.08 Weatherstrip
Bottom weatherstrip will be flexible PVC and held in place by
a retainer that also provides additional reinforcement.
2.09 Finish
Finish will be factory baked-on white (Industrial brown – 426
Series) polyester.
2.10 Operation
Operation will be by manual pull rope. (Optional chain hoist
and electric operator are available.)
PART 3 EXECUTION
3.01 Execution
Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
Overhead Door Corporation distributor.
*Note to specifier: This specification is a suggested guide. Available options are shown in
parentheses.
overhead door corporation 15
18. Medium– Duty Sectional Insulated Steel Doors
SERIES 432
The 432 Series doors offer a 2" (51 mm) panel
Standard Features At a Glance
thickness, a nominal 24-gauge ribbed gal-
Nominal thickness 2" (51 mm) vanized steel exterior, and a polybonded
Maximum standard width 20'2" (6147 mm) back cover. Polystyrene insulation provides
Maximum standard height 16'1" (4902 mm)
an R-value of 7.35 (1.29 W/Msq) and
Exterior steel nominal 24-gauge
galvanized steel optional isocyanuarte provides an R-value
Back cover polybonded laminate of 11.69 (2.06 W/Msq). A variety of options
(26-gauge galvanized steel, makes this door an economical solution for
HIPS-backed optional) applications requiring a medium-duty insu-
Insulation Expanded polystyrene
lated steel door.
(standard)
Isocyanurate (optional)
R-value
Polystyrene 7.35 (1.29 W/Msq) ARCHITECTURAL SPECIFICATIONS* 432
Isocyanurate 11.69 (2.06 W/Msq)
Exterior surface Ribbed PART 1 GENERAL
End stiles 16-gauge steel 1.01 Work Included
Center stiles 16-gauge steel
The doors will be 432 Series as manufactured by
Standard mounting Angle mount
Overhead Door Corporation.
Standard track 2" (51 mm)
Standard springs 10,000 cycle 1.02 Related Work
Weatherstripping Standard on bottom Opening preparation, miscellaneous or structural metal
Operation Manual pull rope work, access panels, finish or field painting, field electri-
Finish White baked-on polyester cal wiring, wire, conduit, fuses and disconnect switches
Lock Interior-mounted slide lock are in the Scope of Work of other divisions or trades.
Options 1.03 Quality Assurance
In accordance with accepted quality assurance guidelines
• Electric operator or chain hoist for motor-operated doors, both the door and electric
• Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm) operator (optional) shall be manufactured by a single-
insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass source producer of door systems; as by Overhead Door
• Individual lites with 1/2" insulated DSB
Corporation.
• Industrial brown polyester paint
• 3" (76 mm) track
PART 2 PRODUCT
• Bracket mounting (not available on full vertical
door tracks) 2.01 Sections
• Bottom sensing edge Section profile will be ribbed. Sections will be nominal,
• Higher-cycle springs in 25k, 50k, 75k, 100k cycles 24-gauge, roll-formed galvanized steel exterior. Sections
• Exhaust ports will have a nominal thickness of 2" (51 mm). Doors will
• Jamb weatherseals, Saverseal pliable blade seal and have rabbeted meeting rails to form weathertight joints
Therma-Flex seal and provide full-width interlocking structural rigidity.
• Bottom strips, including looped PVC weatherstrips, Back cover will be polybonded laminate. (26-gauge
flexible PVC astragal weatherstrips and double-contact galvanized steel, HIPS-backed optional)
weatherstrips
• Reinforcing struts of roll-formed steel hat sections 2.02 Insulation
• Movable center posts for 2" (51 mm) or 3" (76 mm) Insulation will be polystyrene with an R-value of 7.35 (1.29
tracks that roll away, with automatic safety catches W/Msq). (Isocyanurate insulation with an R-value of 11.69
that prevent door closure when posts are removed or 2.06 W/Msq).
• Tumbler keyed lock
2.03 Center and End Stiles
Center and end stiles will be 16-gauge steel, formed and
fastened as integral structures with the rolled sections.
End stiles will be channel-shaped to 2" (51 mm) deep.
16
19. Sectional SteelDoor Systems
SERIES 432
2.04 Springs 2.10 Operation
Standard springs will be 10,000 cycles. (Optional higher-cycle Operation will be by manual pull rope. (Optional chain hoist
25,000, 50,000, 75,000, or 100,000-cycle springs). and electric operator are available.)
2.05 Hardware
PART 3 EXECUTION
Hinges and fixtures will be galvanized steel. Full-floating ball-
bearing rollers will have hardened steel races. Roller sizes will 3.01 Execution
be adequate for design requirements and limitations. Install the doors in accordance with Overhead Door
Corporation instructions and standards, using an authorized
2.06 Track
Overhead Door Corporation distributor.
Track is 2" (51 mm) standard (3" (76 mm) optional) angle-
*Note to specifier: This specification is a suggested guide. Available options are shown in
mounted. (Bracket-mounted track is an option, but not avail- parentheses.
able on full vertical doors).
2.07 Lock Panel Schedule Section Schedule
Lock will be interior-mounted slide lock. (Optional tumbler Door Width Number Door Height Number of
of Panels Sections
keyed lock is available.)
to 10'2" 6'1" to 7'1"
(3099 mm) 2 (2591 mm) 4
2.08 Weatherstrip
10'3" to 12'2" 7'2" to 8'10"
Bottom weatherstrip will be flexible PVC and held in place by (3124 mm to 3708 mm) 3 (2616 mm to 3073 mm) 5
a retainer that also provides additional reinforcement. 12'3" to 16'2"
4
8'11" to 10'7"
6
(3734 mm to 4928 mm) (3099 mm to 3683 mm)
2.09 Finish 16'3" to 19'2" 10'8" to 12'4"
(4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7
Finish will be factory baked-on white (Industrial brown option) 19'3" to 20'2" 12'5" to 16'1"
(5867 mm to 6147 mm) 6 (3099 mm to 4902 mm) 8
polyester coating.
overhead door corporation 17
21. Framing & Pads Detail Sectional SteelDoor Systems
Framing and pad details for common installation of Sectional Steel and Insulated Steel Doors in steel,
wood, concrete and masonry jambs are provided here. If you require additional information or have
special project requirements, refer to the Overhead Door Architectural Design Manual, or consult
with the Overhead Door Applications Engineering Group or your local Overhead Door distributor.
Steel Jambs Wood Jambs Concrete/Masonry Jambs
2" (51 mm) Track 2" (51 mm) Track 2" (51 mm) Track
3" (76 mm) * Track 3" (76 mm) * Track 3" (76 mm)* Track
Minimum Required Sideroom Minimum Required Sideroom Minimum Required Sideroom
Track Type 2” Track (51 mm) 3” Track (76 mm)* Track Type 2” Track (51 mm) 3” Track (76 mm)* Track Type 2” Track (51 mm) 3” Track (76 mm)*
Standard Lift 4 1/2" (114 mm) 6 1/2" (165 mm) Standard Lift 3 1/2" (8 9 mm) 5 1/2"(140 mm) Standard Lift 4 1/2" (1 1 4 mm) 6 1/2" (165 mm)
Low Headroom 9" (229 mm) 10" (254 mm) Low Headroom 8" (203 mm) 9" (229 mm) Low Headroom 9" (229 mm) 10" (254 mm)
Lift Clearance 4 1/2" (114 mm) 6 1/2" (165 mm) Lift Clearance 3 1/2" (8 9 mm) 5 1/2" (140 mm) Lift Clearance 4 1/2" (1 1 4 mm) 5 1/2"(140 mm)
Full Vertical 4 1/2" (14 mm) 6 1/2" (165 mm) Full Vertical 3 1/2" (8 9 mm) 5 1/2" (140 mm) Full Vertical 4 1/2" (1 1 4 mm) 5 1/2" (140 mm)
overhead door corporation 19
22. Electric Operators
Operator Control Options
Overhead Door Corporation offers the
broadest line of electric operators to suit
• Entrapment protection: electric sensing edge, new construction and retrofit applications,
pneumatic sensing edge, or photoelectric sensors as well as unusual or special requirements.
• Push-button, key or combination stations; surface- or Manufactured by Overhead Door
flush-mounted for interior and/or exterior locations Corporation to meet the exacting perform-
• Vehicle detectors, key card reader, photocell and ance requirements of Overhead Door’s
door timer controls upward-acting doors, our ribbon branded
• Treadle or pull switch stations operators afford precise control of door
• Telephone entry and coded keyboard stations action for years of trouble-free operation.
• Universal programmable door timer
• Commercial light package In order to improve safety and enhance
• Radio control systems (24 VAC or 120 VAC ) door and motor life, industry quality assur-
• Explosion and dust ignition-proof systems ance guidelines recommend the choice of
a single manufacturer for both door and
Electric Operator Selection Guide
operator applications. Overhead Door
S Corporation is the only national manufac-
Max. weight of door
Max. height of door
Adjustable clutch
Continuous duty
Totally enclosed
6-rib poly J-belt
Explosion proof
Planetary Gears
turer of a full line of commercial and
Mounting type
Horsepower
Worm gear
industrial doors and operators specifically
V-belt
designed for integral applications.
Armor Drive 1/2, 1 HP 32' 3000 c c T,S,C
(9753 mm) (1360 kg)
Model SDB+ 1, 2 HP 28' 3080 c c c c c S,C Operator Models
(8534 mm) (1397 kg)
Model L+ 1/3, 1/2, 28' 1650 c c c c c T,S,C
3/4 HP (8534 mm) (748 kg) Model SDB+
Model JST+ 1/3, 1/2, 24' 1450 c c c c T,S,C
3/4 HP (7315 mm) (657 kg) Model SDB+ is an extra-heavy-duty
Model SEL+ 1/3,1/2 HP 18' 940 c c c T,S commercial operator designed
(5486 mm) (426 kg)
Model MD 1/2 HP 14' 620 c T,S to operate doors up to 25' (7620
(4267mm) (281 kg)
mm) in height and 3080 pounds
Mounting Options: T = Trolley S = Side mount C = Center mount
(1397 kg). It is available as either a
Entrapment Protection side-mounted or center-mounted unit.
The installation of an external reversing device for all
electrically operated commercial doors is recommended.
Model L+
If a sensing edge or other reversing device is not installed,
Model L+ is a heavy-duty com-
a constant-contact control switch must be used to close
mercial operator designed
the door. We recommend a four-wire, fail-safe electric
to operate doors up to 25'
sensing edge that will not allow the door to close if the
(7620 mm) in height and
sensing edge is damaged or not working properly.
1650 pounds (748 kg). It is
available as a trolley-type (20:1 gear ratio), or side-mount-
NEW Operator Model ed or center-mounted unit (40:1 gear ratios).
ArmorDrive™
The ArmorDrive comes available Model JST+
with a 1/2 hp or 1 hp motor and Model JST+ is a heavy-duty
can open doors up to 3000 lbs. operator designed to operate
This full-featured, modular doors up to 21' (6401 mm) in
door control system lifts every height and 1450 pounds (657
door in our commercial and kg). It is available as a trolley-
industrial lines – from sectional doors and type, side-mounted, or center-
security grilles to the largest rolling steel service door. mounted unit.
Customized mounting kits accomodating your specific
door type, configuration and installation scenario.
20
23. Sectional SteelDoor Systems
Model SEL+ Model MD
Model SEL+ is a heavy-duty operator Model MD operates doors up to 14'
designed to operate doors up to 18' (4267 mm) in height and 620 pounds
(5486 mm) in height and 940 pounds (281 kg). It has a built-in safety system
(426 kg). It is available as a trolley- that automatically reverses during the
type or side-mounted unit. closing cycle. It is available as a trolley-
type or side-mounted unit.
Mounting Details
Trolley-type (Drawbar) operators fea- Side-mounted (jackshaft) operators Center-mounted (jackshaft) operators
ture a power unit mounted between, feature a power unit mounted on the feature a power unit on the front wall
above and to the rear of the horizontal inside front wall and connected to the above the door opening. No additional
tracks. The drawbar drive provides posi- crosshead shaft, with an adjustable cou- backroom is required. Available on
tive control of the door at all times, pling or drive chain and sprockets. models JST+, L+, and SDB+.
making this operator the preferred Available on models MD, SEL+, JST+,
choice whenever possible. Maximum SDB+, and L+.
door width is 20' per drawbar. Available
on Models JST+, SEL+, L+, and MD.
Trolley-type (Drawbar) Side Mount Type Center Mount/Jackshaft Type
JST+, SEL+, L+, MD MD, SEL+, JST+, SDB+, L+ JST+, L+, SDB+
Maximum Headroom Requirements “A” Dimension - Minimum (Sideroom) Maximum Headroom Requirements
ArmorDrive Track Requirements + 6 3/8 (162 mm) 2” (51mm) Track 3” (76mm) Track ArmorDrive Track Requirements + 14 3/4" (375 mm)
JST+ Track Requirements + 5 1/2" (140 mm) ArmorDrive 22" (571 mm) 23 1/2" (597 mm) JST+ Track Requirements + 14" (356 mm)
SEL+ Track Requirements + 4" (102 mm) MD 20 1/4" (514 mm) L+ Track Requirements + 9" (229 mm)
L+ Track Requirements + 3" (76 mm) SEL+ 20" (508 mm) 21" (533 mm) SDB+ Track Requirements + 23" (584 mm)
MD Track Requirements + 3 3/4" (95 mm) JST+ 20" (508 mm) 21" (533 mm) See page 18 for track details
See page 18 for track details SDB+ 26" (660 mm) 26" (660 mm)
L+ 23" (584 mm) 24" (610 mm)
Depth Requirements -“A” Dimension (Backroom)
ArmorDrive Door Height + 4’ 10” (1473 mm)
JST+ Door Height + 4’ 2” (1295 mm)
SEL+ Door Height + 4’ 0” (1219 mm)
L+ Door Height + 6’ 0” (1829 mm)
MD Door Height + 3’ 10” (1168 mm)
overhead door corporation 21
