SlideShare une entreprise Scribd logo
1  sur  52
Télécharger pour lire hors ligne
Summer training report
on
dieSel locomotive workS varanaSi
SHAILESH SHUKLA CT-1674/09
MECHANICAL ENGINEERING
CAET, ETAWAH
introduction
DLW, was founded by Late Railway Minister Mr. Lal Bahadur Shastri on 23
April 1956. It is spread in 300 acres area at Varanasi.
It is a production unit owned by Indian railways , for which it manufactures
diesel–electric locomotives and its spares parts.
To meet the increased transportation needs of the Indian railways it was
established in collaboration with ALCO( American Locomotive Company),
USA in 1961.
 DLW rolled out its first locomotive three years later, on January 3, 1964. It
manufactures locomotives.
Got its first ISO certification in 1997 and ISO-9001 and ISO-14001 in
December 2002.
With technology transfer agreement from manufacturers such as GM-EMD,
DLW today produces advance locomotives having output range from 2600 to
4000 hp.
At present the latest locomotive produced by DLW; i.e. WDG 5 has capacity
upto 5000 HP & trying to make it 5500 HP.
It has supplied locomotives to other countries such as Sri Lanka, Bangladesh,
Malaysia, Tanzania and Vietnam etc.
DLW is supplying locos to PSU’s & Industries Like NTPC, COAL,
INDOGULF etc.
Some factS about dieSel
electric locomotive
DLW’s annual production - 250
Cost of one loco - 12 to 14 crore (EMD)
8 crore (Alco)
Weight of one Loco - 121 Ton
Fuel Consumption; At Full Load - 540 lt/hr.
Idle Load - 40 lt/hr.
Max. Speed - 160 Km/hr.
Dia of Wheel - 1092 mm
Wheel to Wheel Distance - 1596.5 mm
Length of Under Frame - 19962 mm
dieSel electric locomotive
In a diesel-electric locomotive, the diesel engine drives an electrical generator or
alternator whose output provides power to the traction motors. There is no
mechanical connection between the engine and the wheels.
claSSification of locomotiveS
Locos, except the older steam ones, have classification codes that
identify them. This code is of the form
WDG5A “ [ gauge ][ power ][load ][ series ][ sub type ]”
the firSt letter (gauge)
W- Indian broad gauge
Y- meter gauge
Z- narrow gauge(2.5 ft)
N- narrow gauge (2 ft)
the Second letter (motive power)
D- Diesel
C- DC electric (can run under DC traction only)
A- AC electric (can run under AC traction only)
CA- Both DC and AC (can run under both AC and DC tractions)
B- Battery electric locomotive (rare)
the third letter (load type)
G-goods
P-passenger
M-mixed traffic ; both goods and passenger
S-Used for shunting
U-Electric multiple units (E.M.U.)
R-Railcars
the fourth letter (SerieS)
The series digit identifies the horsepower range of the locomotive.
Example for the series letter ‘3’ means that the locomotive has power
over 3000 hp but less than 4000 hp.
the fifth letter (Subtype)
an optional letter or number that indicates some smaller variations in
the basic model.
For ex: ‘A’ for 100 hp,
‘B’ for 200 hp and so on……..
1. block diviSionS
2. engine diviSionS
3. loco diviSionS
production ShopS
 block diviSion
1. Heavy Weld Shop
2. Heavy Machine Shop
engine diviSion
1. Engine Erection Shop
2. Engine Testing Shop
3. Light Machine Shop
4. Sub Assembly Shop
5. Rotor Shop
6. Heat Treatment Shop
7. Turbo Section
loco diviSion
1. Loco Frame Shop
2. Pipe Shop
3. Truck Machine Shop
4. Traction Assembly Shop
5. Sheet Metal Shop
6. Loco Assembly Shop
7. Loco Paint Shop
8. Loco Test Shop
welding Shop
Welding is a process which produces joining of materials
by heating them to suitable temperatures with or
without the application of pressure and with or without
the use of filler material.
Welding is used for making permanent joints.
It is used in the manufacturing of automobile bodies,
aircraft frames, railway wagons, machine frames,
structural works, tanks, furniture, boilers, general repair
work and ship building.
Shielded Metal Arc Welding [SMAW]
Submerged Arc Welding [SAW]
Gas Shielded Metal Arc Welding [MIG]
Flux Cored Arc Welding [FCAW]
Shielded Metal Arc Welding [SMAW]
Submerged Arc Welding [SAW]
Gas Shielded Metal Arc Welding [MIG]
Flux Cored Arc Welding [FCAW]
typeS of welding uSed in dlwtypeS of welding uSed in dlw
What is sMaW?What is sMaW?
 It is a welding process which joins metals by heating the metals to their
melting point with an electric arc set up between the end of a coated metal
electrode and the work piece.
 Molten metal droplets and the molten weld are shielded from the
atmosphere by the gases produced from the decomposition of the flux
coating .
Advantages of SMAWAdvantages of SMAW
• Equipment used is
simple, inexpensive.
• Electrode provides and
regulates its own Flux.
• This process has
excellent suitability for
outdoor use lower
sensitivity to wind and
even for use under
water.
• All position capability
• Equipment used is
simple, inexpensive.
• Electrode provides and
regulates its own Flux.
• This process has
excellent suitability for
outdoor use lower
sensitivity to wind and
even for use under
water.
• All position capability
08/30/13 Build the nation with welding 15
saW Process PrinciPles
 SAW is a welding process which joins metals by heating the metals to their melting
point with an electric arc or arcs set up between a bare metal electrode and the job.
 The arc, the end of electrode and molten pool remains completely hidden and are
invisible being submerged under a blanket of granular flux.
 The continuously fed bare metal electrode melts and acts as filler rod.
SAW Features
•High Productivity, high
amperages
may be used
•Easy to de-slag
•High Quality
•Deep penetration
•Excellent mechanical
properties
•Environment friendly
•Very little fume
•No radiation
•Easy operation
•High Productivity, high
amperages
may be used
•Easy to de-slag
•High Quality
•Deep penetration
•Excellent mechanical
properties
•Environment friendly
•Very little fume
•No radiation
•Easy operation
GMaW
 Gas Metal Arc Welding is a welding
process which joins metals by heating the
metals to their melting point with an
electric arc, produced between
continuous consumable electrode wire
and the metal being welded.
 Wire is fed continuously and
automatically from a spool through the
welding gun
 Shielding gases include inert gases such
as argon and helium for copper and
aluminum welding, and active gases such
as CO2 for steel welding
 Bare electrode wire plus shielding gases
eliminate slag on weld bead. No need for
Applications:
•Used for C, Si, Cu, Ni, Ti etc.
•For welding tool steels and dies.
•For the manufacture of refrigerator parts.
Gas Metal Arc ( MIG )
Welding
 Uses continuous wire 0.6 – 2.0
mm as electrode
 Gas shielded, inert or active gas
 Manual, automatic or semi-
automatic process
 High productivity
 If the wire feed speed is
increased more current is drawn
to burn it off .
 Increasing the current increases
the arc energy and therefore the
heat input. This in turn increases
fusion and penetration, wire
deposition rate and travel speed.
FCAW Process Features
• Uses tubular wire with flux inside
• Gas shielded (FCAW-G) or self
shielded (FCAW-S)
• The flux produces a protective
slag and/or gas cover
• High productivity process with
low spatter. Smooth arc with
CO2. Argon mixtures give
superior performance
• Problem of high fumes which
need to be extracted in enclosed
areas
Summer Training Presentation, DLW Varanasi
22
laser cUttinG-UPto 4MM
23
UnDer Water PlasMa cUttinG UPto 16 MM
Summer Training Presentation, DLW Varanasi
boGie asseMbly shoP
A bogie is a wheeled wagon or trolley. In
mechanics terms, a bogie is a chassis or
framework carrying wheels, attached to a
vehicle.
Usually the train floor is at a level above the
bogies, but the floor of the car may be lower
between bogies.
boGie asseMbly (eMD)
 Wheel and Axle assembly.
 Brake rigging assembly.
 Traction motor & gear case assembly.
 Bearing adopter assembly.
 Final assembly.
Axle, Wheel & Axle Box AssemBly
These wheels are having wear adapted profile to RDSO drawing.
Dead Lever
Live Lever Cylinder Lever
Brake Shoe
Brake Head
BrAke rigging ArrAngement
Axle, Wheel & geAr AssemBly With
trAction motor
trAction motor
• Electric motor providing the primary rotational
torque of a machine, usually for conversion into
linear motion.
•DC series-wound motors, running on
approximately 600 volts.
•The availability of high-powered
semiconductors such as thyristors has now made
practical the use of much simpler, higher-
reliability AC induction motors.
JournAl BeArings & AdAptor
The bogie frame is supported on axles through “soft primary”
suspension consisting of twelve single helical coil springs, two springs
mounted on each bearing adapter (axle box), to provide ride quality and
equalization of wheel-set loads.
Bearing adapter are fitted with tapered roller pre-lubricated, pre
adjusted & sealed bearings.
Bearing adapter
single helical coil springs
Sealed bearings
TPU shims
AssemBly process:
PRESS BULL GEAR ON AXLE.
SHIFT ABOVE ASSEMBLY AT BEARING HOUSING FITTING
STAND.
FIT THE BEARING HOUSING AND BOLTING .
ASSEMBLE SEAL , CAP AND TAPER ROLLER BEARING
BOLTING .
NOW, SHIFT THIS ASSEMBLY ON WHEEL & AXLE PRESS
MACHINE.
BreAkdoWn mAintenAnce
Break down of machine can occur due to the following two reasons:
 Due to unpredictable failure of component which cannot be prevented.
 Due to gradual wear and tear of the parts of the machine which can be prevented by
regular inspection known as preventive maintenance.
preventive mAintenAnce
 Also termed as “planned maintenance” or “systematic maintenance” .
An extremely important function for the reduction of the maintenance cost and to
keep the good operational condition of equipment.
mAintAinAnce AreA
oBJective of preventive mAintenAnce
To obtain maximum availability of the plant by avoiding break down and
by reducing shut down period to a maximum.
To keep the machine in proper condition so as to maintain the quality of the
product.
To ensure the safety of the workers.
To keep the plant at the maximum production efficiency.
To achieve the above objectives with most economical combination.
mAchine shop
1. Heavy Machine Shop
2. Light Machine Shop
1. Conventional machine
2. NC machine
3. CNC machine
1. conventionAl mAchine:
It is a simple machine which is now an old technique.
2. numericAl control mAchine:
Numerical control is defined as a system in which the actions of the machines
are controlled by the insertion of the numerical data. In other words number
controls the action.
types of mAchines
clAssificAtion of numeric control
1. point to point system:
This feature is only useful for drilling and boring
operations. The machine operations are possible at specified positions.
2. strAight line system:
In this system the control can command a path operation
in a single axis at a time.
3. continuous pAth system:
In this system the control instructs the machine to
make movements like 2 or 3 axis at a time. The machine may be directed to
make helical or circular path.
computerized numericAlly controlled
mAchine
In CNC the control system further energized with a mini computer or a post
processor.
The control unit stores the programmed information of the work piece, the
travel limits, collisions zones and the diagnostic information etc. it also
gives a feedback to the operator about the current position and distance to
be travelled etc.
 CNC machines have the ability to edit or alter the existing program in no
time.
mAchines in AreA B
flAme cutting cnc lAser cutting
Steel plates are ultrasonically tested
before being precision cut by
numerically controlled flame
cutting machines or by CNC
LASER machine.
The laser beam is typically 0.2
mm (0.008 in) diameter at the
cutting surface with a power of
1000 to 2000 watts.
Lasers work best on materials
such as carbon steel or stainless
steels because these are difficult
to cut due to their ability to
reflect the light as well as
absorb and conduct heat. This
requires lasers that are more
powerful.
AngulAr Boring MAchine FABricAtion oF engine
Block
This special purpose machine has
two high precision angular boring
bars.
Boring bars are mounted on high
precision bearings which provide
control on size during angular
boring.
 Components after flame cutting
and various machining operations
are fit and tack welded before
taking on rollovers. Heavy Argon-
CO2 welding is done on these
rollovers
cnc Milling MAchines
CNC mills can perform the functions of
drilling and often turning.
CNC Mills are classified according to
the number of axes that they possess.
A standard manual light-duty mill is
typically assumed to have four axes:
Table x.
Table y.
Table z.
Milling Head z.
Summer Training Presentation, DLW Varanasi
luBricAting oil testing
 Lubrication is done for better performance of the engine parts.
 testing is done by checking the circulation of lubricant oil.
 For rotating parts checking is done by seeing the returning path of the oil
i.e. checking not only the forward path but also the returning path.
 RR40 is used as lubricating oil.
types oF testing
wAter testing
Water acts as a coolant for moving part of the engine because constant
movement or rotation causes various parts to heat up and water working as
coolant cooled down the concerned part.
loAd testing
For load testing electrical load is provided to the engine. If there is any
abnormal sound then the engine is again tested for lubrication so that any
flaw which is there can be removed.
engine test operAtion sequence
Base inspection under screen and fitting over screen.
Water circulation.
Lube oil filling and check deflection crank shaft.
Lube oil circulation.
Pre run on no load 3 to 5 times of duration 10 to 30
min each 400 rpm.
Intermediate runs 12 runs of 30 min duration each
from 400 to 1000 rpm.
Check over speed trip of recheck 3 times.
Check bake in nozzles and set tapped clearance.
Inspection before fist hour performance.
First hour performance on full load.
Base inspection.
Second hour performance on full load.
Attend defects of first hour performance.
Final base inspection.
Check engine deficiencies.
Engine clearance.
trAnsport section
In transport section there are basically two types of machine are used for
transportation purpose of the different jobs from one shop to other.
Different machines used are
1. fork lift truck
2. cranes
Fork liFt truck
Forklift is a powered
industrial truck used to lift
and transport materials.
counterBAlAnced ForkliFt coMponents
 Truck Frame - is the base of the machine to which the mast, axles,
wheels, counterweight, overhead guard and power source are attached.
Cab - is the area that contains a seat for the operator along with the
control pedals, steering wheel, levers, switches and a dashboard containing
operator readouts.
Overhead Guard - is a metal roof supported by posts at each corner of the
cab that helps protect the operator from any falling objects.
Power Source - may consist of an internal combustion engine or battery.
Summer Training Presentation, DLW Varanasi
crAnes
A crane is a lifting
machine, generally
equipped with
a winder, wire
ropes or chains and sheaves
, that can be used both to
lift and lower materials and
to move them horizontally.
THANKS

Contenu connexe

Tendances

DLW vocational training report
DLW vocational training reportDLW vocational training report
DLW vocational training reportPrashantSharma897
 
6 weeks vocational traning report about dlw varanasi
6 weeks vocational traning report about dlw varanasi6 weeks vocational traning report about dlw varanasi
6 weeks vocational traning report about dlw varanasiABHISHEK PRIYADARSHI
 
Diesel locomotive works - Truck Machine Shop
Diesel locomotive works - Truck Machine ShopDiesel locomotive works - Truck Machine Shop
Diesel locomotive works - Truck Machine ShopGaurav Mishra
 
Vocational training Report for ECE department
Vocational training  Report for ECE departmentVocational training  Report for ECE department
Vocational training Report for ECE departmentManoj Verma
 
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...Industrial training report on dlw varanasi for Main Receiving Substation, Tra...
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...Devendra Kumar
 
Diesel locomotive works, varanasi
Diesel locomotive works, varanasiDiesel locomotive works, varanasi
Diesel locomotive works, varanasiShubham​ Yadav
 
DLW SUMMER TRAINING REPORT FOR ECE BRANCH
DLW SUMMER TRAINING REPORT FOR ECE BRANCH DLW SUMMER TRAINING REPORT FOR ECE BRANCH
DLW SUMMER TRAINING REPORT FOR ECE BRANCH SUBHAM SINGH
 
Dlw summer training presentation
Dlw summer training presentationDlw summer training presentation
Dlw summer training presentationVarun Mishra
 
DLW Summer training report
DLW Summer  training  reportDLW Summer  training  report
DLW Summer training reportEshver chandra
 
Dlw trainig report by Sumit Tiwari
Dlw trainig report by Sumit TiwariDlw trainig report by Sumit Tiwari
Dlw trainig report by Sumit TiwariSumitTiwari76
 
Report on dlw varanasi
Report on  dlw varanasiReport on  dlw varanasi
Report on dlw varanasiSanjay Yadav
 
DLW varanasi summer training report
DLW varanasi summer training reportDLW varanasi summer training report
DLW varanasi summer training reportshubham chaurasiya
 
INDUSTRIAL TRAINING(PPT) DLW,Varanasi
INDUSTRIAL TRAINING(PPT) DLW,VaranasiINDUSTRIAL TRAINING(PPT) DLW,Varanasi
INDUSTRIAL TRAINING(PPT) DLW,Varanasiak3793
 
4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta
4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta
4 weeks at internship - DLW VARANASI (U.P.) By Parvind GuptaParvind Gupta
 
Diesel Locomotive Works (DLW)
 Diesel Locomotive Works (DLW) Diesel Locomotive Works (DLW)
Diesel Locomotive Works (DLW)Neha Gethe
 
DLW Summer Training for ECE
DLW Summer Training for ECEDLW Summer Training for ECE
DLW Summer Training for ECESujeet Nirmal
 

Tendances (20)

DLW vocational training report
DLW vocational training reportDLW vocational training report
DLW vocational training report
 
BLW SUMMER TRAINING REPORT
BLW SUMMER TRAINING REPORTBLW SUMMER TRAINING REPORT
BLW SUMMER TRAINING REPORT
 
6 weeks vocational traning report about dlw varanasi
6 weeks vocational traning report about dlw varanasi6 weeks vocational traning report about dlw varanasi
6 weeks vocational traning report about dlw varanasi
 
Diesel locomotive works - Truck Machine Shop
Diesel locomotive works - Truck Machine ShopDiesel locomotive works - Truck Machine Shop
Diesel locomotive works - Truck Machine Shop
 
Vocational training Report for ECE department
Vocational training  Report for ECE departmentVocational training  Report for ECE department
Vocational training Report for ECE department
 
Dlw SUMMER TRAINING
Dlw SUMMER TRAININGDlw SUMMER TRAINING
Dlw SUMMER TRAINING
 
DLW WORKSHOP , VARANSI
DLW WORKSHOP , VARANSIDLW WORKSHOP , VARANSI
DLW WORKSHOP , VARANSI
 
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...Industrial training report on dlw varanasi for Main Receiving Substation, Tra...
Industrial training report on dlw varanasi for Main Receiving Substation, Tra...
 
Diesel locomotive works, varanasi
Diesel locomotive works, varanasiDiesel locomotive works, varanasi
Diesel locomotive works, varanasi
 
DLW SUMMER TRAINING REPORT FOR ECE BRANCH
DLW SUMMER TRAINING REPORT FOR ECE BRANCH DLW SUMMER TRAINING REPORT FOR ECE BRANCH
DLW SUMMER TRAINING REPORT FOR ECE BRANCH
 
Dlw summer training presentation
Dlw summer training presentationDlw summer training presentation
Dlw summer training presentation
 
DLW Summer training report
DLW Summer  training  reportDLW Summer  training  report
DLW Summer training report
 
Dlw trainig report by Sumit Tiwari
Dlw trainig report by Sumit TiwariDlw trainig report by Sumit Tiwari
Dlw trainig report by Sumit Tiwari
 
Report on dlw varanasi
Report on  dlw varanasiReport on  dlw varanasi
Report on dlw varanasi
 
DLW varanasi summer training report
DLW varanasi summer training reportDLW varanasi summer training report
DLW varanasi summer training report
 
INDUSTRIAL TRAINING(PPT) DLW,Varanasi
INDUSTRIAL TRAINING(PPT) DLW,VaranasiINDUSTRIAL TRAINING(PPT) DLW,Varanasi
INDUSTRIAL TRAINING(PPT) DLW,Varanasi
 
4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta
4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta
4 weeks at internship - DLW VARANASI (U.P.) By Parvind Gupta
 
Dlw varanasi
Dlw varanasiDlw varanasi
Dlw varanasi
 
Diesel Locomotive Works (DLW)
 Diesel Locomotive Works (DLW) Diesel Locomotive Works (DLW)
Diesel Locomotive Works (DLW)
 
DLW Summer Training for ECE
DLW Summer Training for ECEDLW Summer Training for ECE
DLW Summer Training for ECE
 

En vedette

Presentaion on BHEL- Diesel Locomotive
Presentaion on BHEL- Diesel LocomotivePresentaion on BHEL- Diesel Locomotive
Presentaion on BHEL- Diesel LocomotiveAbhishek Agarwal
 
Erection of steel Structure
Erection of steel StructureErection of steel Structure
Erection of steel StructureGaurang Kakadiya
 
Equipments for erection and compaction
Equipments for erection and compactionEquipments for erection and compaction
Equipments for erection and compactionPrasanthi Nelloor
 
Ind training ppt
Ind training pptInd training ppt
Ind training pptyamipatel
 
6 weeks training for B-tech students
6 weeks training for B-tech students6 weeks training for B-tech students
6 weeks training for B-tech studentsanujvns
 
Sheet metal shop
Sheet metal shopSheet metal shop
Sheet metal shopManoj Yadav
 
Presentation on steel, fabrication & erection Munger Ganga Bridge
Presentation on steel, fabrication & erection  Munger Ganga BridgePresentation on steel, fabrication & erection  Munger Ganga Bridge
Presentation on steel, fabrication & erection Munger Ganga BridgeAshish Kumar Yadav
 
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)Abhishek Chaudhary
 

En vedette (11)

Presentaion on BHEL- Diesel Locomotive
Presentaion on BHEL- Diesel LocomotivePresentaion on BHEL- Diesel Locomotive
Presentaion on BHEL- Diesel Locomotive
 
Electric traction
Electric tractionElectric traction
Electric traction
 
Erection of steel Structure
Erection of steel StructureErection of steel Structure
Erection of steel Structure
 
Sheet metal operations1class
Sheet metal operations1class Sheet metal operations1class
Sheet metal operations1class
 
Equipments for erection and compaction
Equipments for erection and compactionEquipments for erection and compaction
Equipments for erection and compaction
 
Ind training ppt
Ind training pptInd training ppt
Ind training ppt
 
6 weeks training for B-tech students
6 weeks training for B-tech students6 weeks training for B-tech students
6 weeks training for B-tech students
 
Sheet metal shop
Sheet metal shopSheet metal shop
Sheet metal shop
 
Presentation on steel, fabrication & erection Munger Ganga Bridge
Presentation on steel, fabrication & erection  Munger Ganga BridgePresentation on steel, fabrication & erection  Munger Ganga Bridge
Presentation on steel, fabrication & erection Munger Ganga Bridge
 
sheet metal
sheet metalsheet metal
sheet metal
 
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)
BHEL MECHANICAL ( 4TH YEAR ) INTERNSHIP -BLOCK-3(TURBINE SHOP)
 

Similaire à Summer Training Presentation, DLW Varanasi

Diesel locomotive works, varanasi presentation
Diesel locomotive works, varanasi presentationDiesel locomotive works, varanasi presentation
Diesel locomotive works, varanasi presentationShubham​ Yadav
 
Dlw varanasi training ppt
Dlw varanasi training pptDlw varanasi training ppt
Dlw varanasi training pptPraveen Tiwari
 
Chittaranjan locomotives works
Chittaranjan locomotives worksChittaranjan locomotives works
Chittaranjan locomotives worksKanhaiya Kumar
 
presentation on diesel locomotive works (dlw)
presentation on diesel locomotive works (dlw)presentation on diesel locomotive works (dlw)
presentation on diesel locomotive works (dlw)shubham vishwakarma
 
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaPresentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaArjun Gaur
 
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaPresentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaArjun Gaur
 
industrialtraining131119065512phpapp02784896.ppt
industrialtraining131119065512phpapp02784896.pptindustrialtraining131119065512phpapp02784896.ppt
industrialtraining131119065512phpapp02784896.pptNirmalM15
 
new tech related to latest revisions as per gu.ppt
new tech related to latest revisions as per gu.pptnew tech related to latest revisions as per gu.ppt
new tech related to latest revisions as per gu.pptNiharRoy8
 
Summer traning dlw repoart
Summer  traning dlw repoartSummer  traning dlw repoart
Summer traning dlw repoartARJUN MAURYA
 
CLW VOCATIONAL TRAINING REPORT- 2018
CLW VOCATIONAL TRAINING REPORT- 2018CLW VOCATIONAL TRAINING REPORT- 2018
CLW VOCATIONAL TRAINING REPORT- 2018SohagSarkar2
 
dlw taining file
dlw taining filedlw taining file
dlw taining fileRam Bahadur
 
Diesel locomotive workshop
Diesel locomotive workshopDiesel locomotive workshop
Diesel locomotive workshopHome
 
Diesel Locomotive Works Training, Varanasi Presentation ppt
Diesel Locomotive Works Training, Varanasi Presentation pptDiesel Locomotive Works Training, Varanasi Presentation ppt
Diesel Locomotive Works Training, Varanasi Presentation pptSarvesh Mishra
 
Abes engineering college ghaziabad
Abes engineering college  ghaziabadAbes engineering college  ghaziabad
Abes engineering college ghaziabadPalash Awasthi
 
abes engineering college ghaziabad
abes engineering college  ghaziabadabes engineering college  ghaziabad
abes engineering college ghaziabadPalash Awasthi
 

Similaire à Summer Training Presentation, DLW Varanasi (20)

Diesel locomotive works, varanasi presentation
Diesel locomotive works, varanasi presentationDiesel locomotive works, varanasi presentation
Diesel locomotive works, varanasi presentation
 
Dlw varanasi training ppt
Dlw varanasi training pptDlw varanasi training ppt
Dlw varanasi training ppt
 
Prince ppt
Prince pptPrince ppt
Prince ppt
 
Chittaranjan locomotives works
Chittaranjan locomotives worksChittaranjan locomotives works
Chittaranjan locomotives works
 
presentation on diesel locomotive works (dlw)
presentation on diesel locomotive works (dlw)presentation on diesel locomotive works (dlw)
presentation on diesel locomotive works (dlw)
 
introuduction DLW varanaesi
introuduction DLW varanaesiintrouduction DLW varanaesi
introuduction DLW varanaesi
 
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaPresentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
 
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaPresentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, Patiala
 
industrialtraining131119065512phpapp02784896.ppt
industrialtraining131119065512phpapp02784896.pptindustrialtraining131119065512phpapp02784896.ppt
industrialtraining131119065512phpapp02784896.ppt
 
new tech related to latest revisions as per gu.ppt
new tech related to latest revisions as per gu.pptnew tech related to latest revisions as per gu.ppt
new tech related to latest revisions as per gu.ppt
 
Railway Training ppt
Railway Training pptRailway Training ppt
Railway Training ppt
 
Summer traning dlw repoart
Summer  traning dlw repoartSummer  traning dlw repoart
Summer traning dlw repoart
 
CLW VOCATIONAL TRAINING REPORT- 2018
CLW VOCATIONAL TRAINING REPORT- 2018CLW VOCATIONAL TRAINING REPORT- 2018
CLW VOCATIONAL TRAINING REPORT- 2018
 
dlw taining file
dlw taining filedlw taining file
dlw taining file
 
Shubhankar Singh
Shubhankar SinghShubhankar Singh
Shubhankar Singh
 
dlw training PPT
 dlw training PPT dlw training PPT
dlw training PPT
 
Diesel locomotive workshop
Diesel locomotive workshopDiesel locomotive workshop
Diesel locomotive workshop
 
Diesel Locomotive Works Training, Varanasi Presentation ppt
Diesel Locomotive Works Training, Varanasi Presentation pptDiesel Locomotive Works Training, Varanasi Presentation ppt
Diesel Locomotive Works Training, Varanasi Presentation ppt
 
Abes engineering college ghaziabad
Abes engineering college  ghaziabadAbes engineering college  ghaziabad
Abes engineering college ghaziabad
 
abes engineering college ghaziabad
abes engineering college  ghaziabadabes engineering college  ghaziabad
abes engineering college ghaziabad
 

Plus de SHAILESH SHUKLA

Design of Rubble Mound Seawall
Design of Rubble Mound SeawallDesign of Rubble Mound Seawall
Design of Rubble Mound SeawallSHAILESH SHUKLA
 
IMPRESSED CURRENT CATHODIC PROTECTION
IMPRESSED CURRENT CATHODIC PROTECTIONIMPRESSED CURRENT CATHODIC PROTECTION
IMPRESSED CURRENT CATHODIC PROTECTIONSHAILESH SHUKLA
 
VESSEL TRAFFIC MANAGEMENT SYSTEM
VESSEL TRAFFIC MANAGEMENT SYSTEMVESSEL TRAFFIC MANAGEMENT SYSTEM
VESSEL TRAFFIC MANAGEMENT SYSTEMSHAILESH SHUKLA
 
Design of Rubble Mound Seawall
Design of Rubble Mound SeawallDesign of Rubble Mound Seawall
Design of Rubble Mound SeawallSHAILESH SHUKLA
 
Cruise missile technology By shailesh shukla ppt
Cruise missile technology By shailesh shukla pptCruise missile technology By shailesh shukla ppt
Cruise missile technology By shailesh shukla pptSHAILESH SHUKLA
 
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...SHAILESH SHUKLA
 

Plus de SHAILESH SHUKLA (6)

Design of Rubble Mound Seawall
Design of Rubble Mound SeawallDesign of Rubble Mound Seawall
Design of Rubble Mound Seawall
 
IMPRESSED CURRENT CATHODIC PROTECTION
IMPRESSED CURRENT CATHODIC PROTECTIONIMPRESSED CURRENT CATHODIC PROTECTION
IMPRESSED CURRENT CATHODIC PROTECTION
 
VESSEL TRAFFIC MANAGEMENT SYSTEM
VESSEL TRAFFIC MANAGEMENT SYSTEMVESSEL TRAFFIC MANAGEMENT SYSTEM
VESSEL TRAFFIC MANAGEMENT SYSTEM
 
Design of Rubble Mound Seawall
Design of Rubble Mound SeawallDesign of Rubble Mound Seawall
Design of Rubble Mound Seawall
 
Cruise missile technology By shailesh shukla ppt
Cruise missile technology By shailesh shukla pptCruise missile technology By shailesh shukla ppt
Cruise missile technology By shailesh shukla ppt
 
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...
“STUDY AND FABRICATION OF OUTDOOR MIST/FOG COOLING SYSTEM THROUGH HIGH PRESSU...
 

Dernier

Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsYusuf Yıldız
 
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratoryدليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide LaboratoryBahzad5
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxJoseeMusabyimana
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfRedhwan Qasem Shaddad
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxjasonsedano2
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfGiovanaGhasary1
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxrealme6igamerr
 
cloud computing notes for anna university syllabus
cloud computing notes for anna university syllabuscloud computing notes for anna university syllabus
cloud computing notes for anna university syllabusViolet Violet
 
Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...sahb78428
 
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Sean Meyn
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Projectreemakb03
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesDIPIKA83
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging systemgokuldongala
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxSAJITHABANUS
 
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...Amil baba
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfNaveenVerma126
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchrohitcse52
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 

Dernier (20)

Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovations
 
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratoryدليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide Laboratory
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptx
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdf
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptx
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdf
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
 
cloud computing notes for anna university syllabus
cloud computing notes for anna university syllabuscloud computing notes for anna university syllabus
cloud computing notes for anna university syllabus
 
Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...
 
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Project
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display Devices
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging system
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
 
計劃趕得上變化
計劃趕得上變化計劃趕得上變化
計劃趕得上變化
 
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...
Popular-NO1 Kala Jadu Expert Specialist In Germany Kala Jadu Expert Specialis...
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 

Summer Training Presentation, DLW Varanasi

  • 1. Summer training report on dieSel locomotive workS varanaSi
  • 2. SHAILESH SHUKLA CT-1674/09 MECHANICAL ENGINEERING CAET, ETAWAH
  • 3. introduction DLW, was founded by Late Railway Minister Mr. Lal Bahadur Shastri on 23 April 1956. It is spread in 300 acres area at Varanasi. It is a production unit owned by Indian railways , for which it manufactures diesel–electric locomotives and its spares parts. To meet the increased transportation needs of the Indian railways it was established in collaboration with ALCO( American Locomotive Company), USA in 1961.  DLW rolled out its first locomotive three years later, on January 3, 1964. It manufactures locomotives.
  • 4. Got its first ISO certification in 1997 and ISO-9001 and ISO-14001 in December 2002. With technology transfer agreement from manufacturers such as GM-EMD, DLW today produces advance locomotives having output range from 2600 to 4000 hp. At present the latest locomotive produced by DLW; i.e. WDG 5 has capacity upto 5000 HP & trying to make it 5500 HP. It has supplied locomotives to other countries such as Sri Lanka, Bangladesh, Malaysia, Tanzania and Vietnam etc. DLW is supplying locos to PSU’s & Industries Like NTPC, COAL, INDOGULF etc.
  • 5. Some factS about dieSel electric locomotive DLW’s annual production - 250 Cost of one loco - 12 to 14 crore (EMD) 8 crore (Alco) Weight of one Loco - 121 Ton Fuel Consumption; At Full Load - 540 lt/hr. Idle Load - 40 lt/hr. Max. Speed - 160 Km/hr. Dia of Wheel - 1092 mm Wheel to Wheel Distance - 1596.5 mm Length of Under Frame - 19962 mm
  • 6. dieSel electric locomotive In a diesel-electric locomotive, the diesel engine drives an electrical generator or alternator whose output provides power to the traction motors. There is no mechanical connection between the engine and the wheels.
  • 7. claSSification of locomotiveS Locos, except the older steam ones, have classification codes that identify them. This code is of the form WDG5A “ [ gauge ][ power ][load ][ series ][ sub type ]” the firSt letter (gauge) W- Indian broad gauge Y- meter gauge Z- narrow gauge(2.5 ft) N- narrow gauge (2 ft) the Second letter (motive power) D- Diesel C- DC electric (can run under DC traction only) A- AC electric (can run under AC traction only) CA- Both DC and AC (can run under both AC and DC tractions) B- Battery electric locomotive (rare)
  • 8. the third letter (load type) G-goods P-passenger M-mixed traffic ; both goods and passenger S-Used for shunting U-Electric multiple units (E.M.U.) R-Railcars the fourth letter (SerieS) The series digit identifies the horsepower range of the locomotive. Example for the series letter ‘3’ means that the locomotive has power over 3000 hp but less than 4000 hp. the fifth letter (Subtype) an optional letter or number that indicates some smaller variations in the basic model. For ex: ‘A’ for 100 hp, ‘B’ for 200 hp and so on……..
  • 9. 1. block diviSionS 2. engine diviSionS 3. loco diviSionS production ShopS  block diviSion 1. Heavy Weld Shop 2. Heavy Machine Shop
  • 10. engine diviSion 1. Engine Erection Shop 2. Engine Testing Shop 3. Light Machine Shop 4. Sub Assembly Shop 5. Rotor Shop 6. Heat Treatment Shop 7. Turbo Section
  • 11. loco diviSion 1. Loco Frame Shop 2. Pipe Shop 3. Truck Machine Shop 4. Traction Assembly Shop 5. Sheet Metal Shop 6. Loco Assembly Shop 7. Loco Paint Shop 8. Loco Test Shop
  • 12. welding Shop Welding is a process which produces joining of materials by heating them to suitable temperatures with or without the application of pressure and with or without the use of filler material. Welding is used for making permanent joints. It is used in the manufacturing of automobile bodies, aircraft frames, railway wagons, machine frames, structural works, tanks, furniture, boilers, general repair work and ship building.
  • 13. Shielded Metal Arc Welding [SMAW] Submerged Arc Welding [SAW] Gas Shielded Metal Arc Welding [MIG] Flux Cored Arc Welding [FCAW] Shielded Metal Arc Welding [SMAW] Submerged Arc Welding [SAW] Gas Shielded Metal Arc Welding [MIG] Flux Cored Arc Welding [FCAW] typeS of welding uSed in dlwtypeS of welding uSed in dlw
  • 14. What is sMaW?What is sMaW?  It is a welding process which joins metals by heating the metals to their melting point with an electric arc set up between the end of a coated metal electrode and the work piece.  Molten metal droplets and the molten weld are shielded from the atmosphere by the gases produced from the decomposition of the flux coating .
  • 15. Advantages of SMAWAdvantages of SMAW • Equipment used is simple, inexpensive. • Electrode provides and regulates its own Flux. • This process has excellent suitability for outdoor use lower sensitivity to wind and even for use under water. • All position capability • Equipment used is simple, inexpensive. • Electrode provides and regulates its own Flux. • This process has excellent suitability for outdoor use lower sensitivity to wind and even for use under water. • All position capability 08/30/13 Build the nation with welding 15
  • 16. saW Process PrinciPles  SAW is a welding process which joins metals by heating the metals to their melting point with an electric arc or arcs set up between a bare metal electrode and the job.  The arc, the end of electrode and molten pool remains completely hidden and are invisible being submerged under a blanket of granular flux.  The continuously fed bare metal electrode melts and acts as filler rod.
  • 17. SAW Features •High Productivity, high amperages may be used •Easy to de-slag •High Quality •Deep penetration •Excellent mechanical properties •Environment friendly •Very little fume •No radiation •Easy operation •High Productivity, high amperages may be used •Easy to de-slag •High Quality •Deep penetration •Excellent mechanical properties •Environment friendly •Very little fume •No radiation •Easy operation
  • 18. GMaW  Gas Metal Arc Welding is a welding process which joins metals by heating the metals to their melting point with an electric arc, produced between continuous consumable electrode wire and the metal being welded.  Wire is fed continuously and automatically from a spool through the welding gun  Shielding gases include inert gases such as argon and helium for copper and aluminum welding, and active gases such as CO2 for steel welding  Bare electrode wire plus shielding gases eliminate slag on weld bead. No need for Applications: •Used for C, Si, Cu, Ni, Ti etc. •For welding tool steels and dies. •For the manufacture of refrigerator parts.
  • 19. Gas Metal Arc ( MIG ) Welding  Uses continuous wire 0.6 – 2.0 mm as electrode  Gas shielded, inert or active gas  Manual, automatic or semi- automatic process  High productivity  If the wire feed speed is increased more current is drawn to burn it off .  Increasing the current increases the arc energy and therefore the heat input. This in turn increases fusion and penetration, wire deposition rate and travel speed.
  • 20. FCAW Process Features • Uses tubular wire with flux inside • Gas shielded (FCAW-G) or self shielded (FCAW-S) • The flux produces a protective slag and/or gas cover • High productivity process with low spatter. Smooth arc with CO2. Argon mixtures give superior performance • Problem of high fumes which need to be extracted in enclosed areas
  • 23. 23 UnDer Water PlasMa cUttinG UPto 16 MM
  • 25. boGie asseMbly shoP A bogie is a wheeled wagon or trolley. In mechanics terms, a bogie is a chassis or framework carrying wheels, attached to a vehicle. Usually the train floor is at a level above the bogies, but the floor of the car may be lower between bogies.
  • 26. boGie asseMbly (eMD)  Wheel and Axle assembly.  Brake rigging assembly.  Traction motor & gear case assembly.  Bearing adopter assembly.  Final assembly.
  • 27. Axle, Wheel & Axle Box AssemBly These wheels are having wear adapted profile to RDSO drawing.
  • 28. Dead Lever Live Lever Cylinder Lever Brake Shoe Brake Head BrAke rigging ArrAngement
  • 29. Axle, Wheel & geAr AssemBly With trAction motor
  • 30. trAction motor • Electric motor providing the primary rotational torque of a machine, usually for conversion into linear motion. •DC series-wound motors, running on approximately 600 volts. •The availability of high-powered semiconductors such as thyristors has now made practical the use of much simpler, higher- reliability AC induction motors.
  • 31. JournAl BeArings & AdAptor The bogie frame is supported on axles through “soft primary” suspension consisting of twelve single helical coil springs, two springs mounted on each bearing adapter (axle box), to provide ride quality and equalization of wheel-set loads. Bearing adapter are fitted with tapered roller pre-lubricated, pre adjusted & sealed bearings. Bearing adapter single helical coil springs Sealed bearings TPU shims
  • 32. AssemBly process: PRESS BULL GEAR ON AXLE. SHIFT ABOVE ASSEMBLY AT BEARING HOUSING FITTING STAND. FIT THE BEARING HOUSING AND BOLTING . ASSEMBLE SEAL , CAP AND TAPER ROLLER BEARING BOLTING . NOW, SHIFT THIS ASSEMBLY ON WHEEL & AXLE PRESS MACHINE.
  • 33. BreAkdoWn mAintenAnce Break down of machine can occur due to the following two reasons:  Due to unpredictable failure of component which cannot be prevented.  Due to gradual wear and tear of the parts of the machine which can be prevented by regular inspection known as preventive maintenance. preventive mAintenAnce  Also termed as “planned maintenance” or “systematic maintenance” . An extremely important function for the reduction of the maintenance cost and to keep the good operational condition of equipment. mAintAinAnce AreA
  • 34. oBJective of preventive mAintenAnce To obtain maximum availability of the plant by avoiding break down and by reducing shut down period to a maximum. To keep the machine in proper condition so as to maintain the quality of the product. To ensure the safety of the workers. To keep the plant at the maximum production efficiency. To achieve the above objectives with most economical combination.
  • 35. mAchine shop 1. Heavy Machine Shop 2. Light Machine Shop
  • 36. 1. Conventional machine 2. NC machine 3. CNC machine 1. conventionAl mAchine: It is a simple machine which is now an old technique. 2. numericAl control mAchine: Numerical control is defined as a system in which the actions of the machines are controlled by the insertion of the numerical data. In other words number controls the action. types of mAchines
  • 37. clAssificAtion of numeric control 1. point to point system: This feature is only useful for drilling and boring operations. The machine operations are possible at specified positions. 2. strAight line system: In this system the control can command a path operation in a single axis at a time. 3. continuous pAth system: In this system the control instructs the machine to make movements like 2 or 3 axis at a time. The machine may be directed to make helical or circular path.
  • 38. computerized numericAlly controlled mAchine In CNC the control system further energized with a mini computer or a post processor. The control unit stores the programmed information of the work piece, the travel limits, collisions zones and the diagnostic information etc. it also gives a feedback to the operator about the current position and distance to be travelled etc.  CNC machines have the ability to edit or alter the existing program in no time.
  • 39. mAchines in AreA B flAme cutting cnc lAser cutting Steel plates are ultrasonically tested before being precision cut by numerically controlled flame cutting machines or by CNC LASER machine. The laser beam is typically 0.2 mm (0.008 in) diameter at the cutting surface with a power of 1000 to 2000 watts. Lasers work best on materials such as carbon steel or stainless steels because these are difficult to cut due to their ability to reflect the light as well as absorb and conduct heat. This requires lasers that are more powerful.
  • 40. AngulAr Boring MAchine FABricAtion oF engine Block This special purpose machine has two high precision angular boring bars. Boring bars are mounted on high precision bearings which provide control on size during angular boring.  Components after flame cutting and various machining operations are fit and tack welded before taking on rollovers. Heavy Argon- CO2 welding is done on these rollovers
  • 41. cnc Milling MAchines CNC mills can perform the functions of drilling and often turning. CNC Mills are classified according to the number of axes that they possess. A standard manual light-duty mill is typically assumed to have four axes: Table x. Table y. Table z. Milling Head z.
  • 43. luBricAting oil testing  Lubrication is done for better performance of the engine parts.  testing is done by checking the circulation of lubricant oil.  For rotating parts checking is done by seeing the returning path of the oil i.e. checking not only the forward path but also the returning path.  RR40 is used as lubricating oil. types oF testing
  • 44. wAter testing Water acts as a coolant for moving part of the engine because constant movement or rotation causes various parts to heat up and water working as coolant cooled down the concerned part. loAd testing For load testing electrical load is provided to the engine. If there is any abnormal sound then the engine is again tested for lubrication so that any flaw which is there can be removed.
  • 45. engine test operAtion sequence Base inspection under screen and fitting over screen. Water circulation. Lube oil filling and check deflection crank shaft. Lube oil circulation. Pre run on no load 3 to 5 times of duration 10 to 30 min each 400 rpm. Intermediate runs 12 runs of 30 min duration each from 400 to 1000 rpm.
  • 46. Check over speed trip of recheck 3 times. Check bake in nozzles and set tapped clearance. Inspection before fist hour performance. First hour performance on full load. Base inspection. Second hour performance on full load. Attend defects of first hour performance. Final base inspection. Check engine deficiencies. Engine clearance.
  • 47. trAnsport section In transport section there are basically two types of machine are used for transportation purpose of the different jobs from one shop to other. Different machines used are 1. fork lift truck 2. cranes
  • 48. Fork liFt truck Forklift is a powered industrial truck used to lift and transport materials.
  • 49. counterBAlAnced ForkliFt coMponents  Truck Frame - is the base of the machine to which the mast, axles, wheels, counterweight, overhead guard and power source are attached. Cab - is the area that contains a seat for the operator along with the control pedals, steering wheel, levers, switches and a dashboard containing operator readouts. Overhead Guard - is a metal roof supported by posts at each corner of the cab that helps protect the operator from any falling objects. Power Source - may consist of an internal combustion engine or battery.
  • 51. crAnes A crane is a lifting machine, generally equipped with a winder, wire ropes or chains and sheaves , that can be used both to lift and lower materials and to move them horizontally.

Notes de l'éditeur

  1. 08/30/13
  2. 2
  3. 08/30/13