1. Alternating Current Alternating current reverses its direction periodically. The current flows one way for a while and then reverses and flows the other way for a while. The electrons don't move along a wire, they vibrate back and forth at the frequency of the alternations.
4. More interesting: RC Circuits An RC circuit can be used to charge a capacitor through a resistor: Closing switch S results in current flowing, making charge go to both sides of the capacitor When the voltage across C is = V 0 , current stops
5. More interesting: RC Circuits When the switch in an RC circuit is closed, the current has its maximum value (all the voltage is across the resistor, and the voltage across the capacitor is zero). As charge builds up on the capacitor, the current decreases and the capacitor voltage increases. After a time, all the voltage is across the capacitor, no current can flow
6. RC Circuits Voltage as a function of time: Current as a function of time: The quantity RC has the dimensions of time, and is called the time constant.
7. RC Circuits A charged capacitor may be discharged through a resistor; in this case no battery is needed.
8. RC Circuits In alternating current, the frequency of voltage swings determines what happens in an RC circuit If freq = low, capacitor has time to charge, a lot of voltage develops across capacitor on each cycle If freq = high, before the capacitor has time to charge, the current is already reversing. So current flows freely, very little voltage ever develops across the capacitor This can be easily used to change the behavior of a circuit that might be exposed to many different frequencies
9. High Pass Filter If the input signal has low freq, most of the voltage gets stuck on C. The output (measurement across the resistor), is a small voltage. But high freqs get transmitted unaffected. NEED PLOT
10. Low Pass Filter If the input signal has low freq, most of the voltage gets stuck on C. The output is the full voltage. But high freqs don’t cause a voltage being developed on C. NEED PLOT frequency Output V/V 0
11. Filters Radio waves are electromagnetic waves with MHz frequencies. Many different stations operate at special frequencies. Tuning a radio to one station involves changing values of resisters to make a circuit sensitive to only a narrow band of frequencies We can use high and low pass filters together to make band-pass filters, or band stop filters, or all sorts of filters…
12.
13. Diodes can be used to change AC into DC Only when current is flowing in the right direction does a voltage develop on resistor One side is only ever positive
14. Diodes can be used to change AC into DC Full wave rectifier circuit: Positive V get through to + output, negative V gets to - output
15. Diodes can be used to change AC into DC If a Capacitor is added in parallel to the output of a Rectifier (to form a simple Low-Pass Filter Circuit), the output of the Rectifier is transformed into a more stable DC Voltage