1. A
PRACTICAL TRAINING SEMINAR REPORT
ON
8051 EMBEDDED SYSTEM
Training at
CREATIVE AND INNOVATIVE RESEARCH
JAIPUR
Submitted To: Submitted by:
Mr. RAHUL MATHUR SHUBHAJIT VISHWAS
ROLL NO. 10ESLEC052
ECE, SLBS, JODHPUR B.TECH. IV year ECE(B3)
2. TOPICS TO BE COVERED:-
• What Is Embedded System…?
• Micro Controller (Meaning).
• Requirement for embedded system.
• 8051 pin diagram.
• Features of Micro Controller.
• Schematic Representation.
• Various Integrated Circuits.
• Applications of Micro Controller.
• Advantages/Disadvantages of Micro Control.
3. What is an embedded system..??
An Embedded System can be defined
as a computer system designed to
perform specific function.
It bring together
software, hardware, and mechanical
parts with either fixed or
programmable capabilities.
4. Requirements for embedded system
Software:-
Keil µVision
Win- AVR
Proteus
Dip trace
Hardware:-
AT89C51
and
as our requirement
5. EMBEDDED SYSTEM IN DAILY LIFE
Moving message display Digital clock
DVD player Traffic Light
6. Micro controller
Micro controller is used to control
the operation of various machines
and devices according to the
program/instruction.
8. Pin’s of 8051.
Vcc
GND
Port 0
Port 1
Port 2
Port 3
RST
ALE / PROG
PSEN
EA / VPP
XTAL 1
XTAL 2
9. 8051 Microcontroller
Intel introduced 8051, referred as MCS- 51, in
1981.
The 8051 is an 8-bit processor
The CPU can work on only 8 bits of data at a time
The 8051 became widely popular after allowing
other manufactures to make and market any
flavor of the 8051.
10. 8051 Features
4K bytes ROM
128 bytes of on-chip Data RAM
32 bidirectional and individually addressable I/0 lines
Two 16-bit timer/counters :T0 and T1
On-chip clock oscillator
13. Uln 2003/2803 series
• This is 7/8 channel inductive load driver IC.
• Made up by Darlington transistor pair b/w
input-output.
• This IC can only sink but not source.
14. M
12V1 0
M
0 1
motor can’t drive
Input
from
m.c
Gnd.
This showes that this IC can only sink but not source
15. L293D
The L293D is assembled in a 16 lead
plastic
package which has 4 center pins connected
together and used for heat sinking.
This device is suitable for use in switching
applications at frequencies up to 5 kHz.
600mA OUTPUT CURRENT CAPABILITY
PER CHANNEL
It is motor driver IC’s.
19. Advantages/ Disadvantages of M.C.
Advantages
Cheap
Small in size
Programming of MC is simple
Disadvantages
Functionality is quite difficult.
Specific purposes
Speed ( if you need a response to an input
In less than a few microseconds)