Acn Experiment No 6
•Télécharger en tant que DOC, PDF•
0 j'aime•604 vues
The document describes the configuration of two routers, R1 and R2. On each router, serial interface S0/0 and Fast Ethernet interface F0/0 are configured with IP addresses and enabled. Ping tests are then able to reach the IP address of F0/0 on R1, indicating basic connectivity is established between the two routers.
Recommandé
Contenu connexe
Tendances
Tendances (20)
En vedette
En vedette (15)
Similaire à Acn Experiment No 6
Similaire à Acn Experiment No 6 (20)
Dernier
Dernier (20)
Acn Experiment No 6
- 1. R1 Router Con0 is now available Press RETURN to get started! Router>enable Router#confi Router#configure ter Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z Router(config)#inter Router(config)#interface s0/0 Router(config-if)#ip add Router(config-if)#ip address 192.168.1.1 255.255.255.0 Router(config-if)#clo Router(config-if)#clock r Router(config-if)#clock rate 64000 Router(config-if)#no shut Router(config-if)#no shutdown 11:08:56 %LINK-3-UPDOWN: Interface Serial0/0, changed state to up 11:08:56 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up Router(config-if)#exit Router(config)#con Router(config)#con Router(config)#conf Router(config)#config t Router(config)#config ter Router(config)#config Router(config)#inter Router(config)#interface F0/0 Router(config-if)#ip add Router(config-if)#ip address 192.168.101.1 255.255.255.0 Router(config-if)#no sh Router(config-if)#no shutdown 11:10:20 %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up 11:10:20 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
- 2. Router(config-if)#exit Router(config)# R2 Router Con0 is now available Press RETURN to get started! Router>enable Router#con Router#confi Router#configure ter Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z Router(config)#inter Router(config)#interface s0/0 Router(config-if)#ip add Router(config-if)#ip address 192.168.1.2 255.255.255.0 Router(config-if)#no sh Router(config-if)#no shutdown 11:11:41 %LINK-3-UPDOWN: Interface Serial0/0, changed state to up 11:11:41 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up Router(config-if)#exit Router(config)#inter Router(config)#interface F0/0 Router(config-if)#ip add Router(config-if)#ip address 192.168.100.1 255.255.255.0 Router(config-if)#no sh Router(config-if)#no shutdown 11:12:24 %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up 11:12:24 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#exit
- 3. Ping Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-1999 Microsoft Corp. C:>ping 192.168.101.1/24 Unknown host 192.168.101.1/24 C:>ping 192.168.101.1 Pinging 192.168.101.1 with 32 bytes of data: Reply from 192.168.101.1 ;bytes=32 time=22ms TTL=254 Reply from 192.168.101.1 ;bytes=32 time=22ms TTL=254 Reply from 192.168.101.1 ;bytes=32 time=22ms TTL=254 Reply from 192.168.101.1 ;bytes=32 time=22ms TTL=254 Ping Statistics for 192.168.101.1: Packets Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 22ms, Maximum = 23ms, Average = 22ms C:>