This document is a catalog for Siemon's networking cabling solutions. It introduces their TERA Category 7A/Class FA cabling system, which exceeds the specifications for Category 7A and Class FA and supports performance beyond 10Gb/s. The TERA system includes outlets, patch panels, patch cords, video baluns, trunking cables, and more. The catalog then outlines the various sections that describe Siemon's other cabling products like their Category 6A, Category 6, Category 5e, fiber optic cabling, infrastructure management solutions, faceplates, racks, and additional tools.
2. Cover_2010_Final:Layout 1 2/12/10 4:27 PM Page 2
S I E M O N S Y S T E M C ATA L O G
N E T W O R K C A B L I N G S O L U T I O N S C A T A L O G
W W W . S I E M O N . C O M
3. Cover_2010_Final:Layout 1 2/12/10 4:27 PM Page 3
Siemon Innovation
Inspired by our past, focused on the future
In 1903, Carl Siemon launched The Siemon Company on the
strength of his own innovative plastic compounds and soon
began pioneering new telecommunication technologies.
Over a century later that spirit of innovation is still at the core
of everything we do at Siemon – driving us to
develop the most forward-looking, high-quality line of
network cabling solutions in the world.
This catalog represents over a century of Siemon
expertise, detailing the latest innovations and key
products in each of Siemon’s high-performance cabling sys-
tems.
New in this edition:
Revolutionary Z-MAX™ Copper Cabling System
VersaPOD™ Data Center Cabinet Solution
XLR8™ Mechanical Splice Fiber Optic
Termination System
Enhanced and expanded Fiber Optic
Plug and Play Line
MapIT™ G2 – Next-Generation Intelligent
Infrastructure Management Solution
LockIT™ Secure Connectivity System
5. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 1
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
Category 7A/Class FA Products
Exceeding ISO/IEC category 7A /class FA specifications,
Siemon’s fully shielded TERA end-to-end cabling solution is
the highest-performing, most secure twisted-pair copper
cabling system available. TERA supports performance beyond
10Gb/s and passes stringent TEMPEST security testing.
Beyond industry best speed and best total cost of ownership,
TERA’s unique cable-sharing ability in support of lower speed
applications results in a more “Green” solution and can also
provide up-front savings through the reduction of cable
counts. By combining the use of one TERA outlet dedicated
for high-speed applications of 10Gb/s and beyond and another
for cable sharing of lower speed voice and video applications,
end-users simultaneously benefit from the highest performing
and most cost effective copper solution.
The only non-RJ connector approved as a category 7A/class
FA interface, TERA fits within a standard RJ45 footprint and is
easily connected to RJ45 equipped electronics via TERA to RJ
patch cords.
SECTION CONTENTS
TERA 4-Pair Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2
TERA-MAX® Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
TERA Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4 – 1.5
TERA Video Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5
TERA S/FTP Trunking Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . .1.6
TERA S/FTP 1000 MHz Cables (US) . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7
TERA S/FTP 1000 MHz Cables (International) . . . . . . . . . . . . . . . . . . . .1.8
1.0 www.siemon.com
6. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 2
C AT E G O R Y 7 A / C L A S S F A ® P R O D U C T S
TERA Outlet
Invented by Siemon in 1999 and subsequently chosen as an
industry standard interface for category 7/class F and
category 7A /class FA, the Siemon TERA outlet is by far the
Easy Installation
highest performing twisted-pair copper connector in the CPT-T tool reduces preparation and
world. When installed as part of a TERA solution, each pair termination time.
delivers 1.2 GHz per pair — exceeding category 7A /class FA
specifications. This extra bandwidth supports demanding
applications like broadband video, with an upper frequency
requirement of 862 MHz.
Mounting Options
The TERA outlet is compatible with TERA-
MAX® patch panels and all MAX series
faceplates.
8
4
7
1 6
3 5 Quick-Ground™
2
Termination
No additional steps required for
termination. Cable shield is automatically
terminated within the outlet without
additional steps or tools.
1 Bend Relief — Rear boot provides bend relief for cable exiting the 5 Hinged Door — Outlets include a hinged door to prevent exposure
plug and outlet to dust and other contaminates
2 Fully Shielded — Terminates fully shielded (F/FTP and S/FTP) 6 Quadrant Isolation — Shielded quadrant design fully isolates
cable — virtually eliminates alien crosstalk pairs for optimum NEXT performance
3 Shielded Termination — Connector automatically assures proper 7 Application Sharing — TERA’s ability to support multiple
termination of cable shield — no additional processes required for applications over a single 4-pair cable and outlet can save
grounding cable significant material and installation costs
4 Compact Design — Slim, compact design allows outlets to be 8 TEMPEST Security Tested — The TERA system is the first and
side-stacked and inserted from either the front or rear of faceplates only copper system to pass TEMPEST emissions testing by an
independent, NSA certified lab, Dayton T. Brown Inc.
www.siemon.com 1.1
7. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 3
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA 4-Pair Outlet
TERA outlets are the industry’s highest performing network cabling
connectors. Outlets accept 1-, 2- and 4-pair plugs and terminate fully shielded
category 7 and 7A cables. TERA outlets can be used in both the work area and
in the telecommunications room.
Part # Description
T7F-01-1. . . . . . . . . . . . . . . . . . TERA 4-pair outlet with black door, latch and boot. Compatible with 0.64-0.55mm
(22-23 AWG) solid S/FTP and F/FTP cable
TERA Cable Sharing
Up to four simultaneous applications can be served from a single 4-pair, S/FTP cable and
TERA outlet, saving significant materials, labor, pathway and rack space.
Broadband Video
(1-pair)
Voice
10/100 Ethernet
(1-pair)
(2-pair)
One TERA replaces four 1-pair analog voice outlets — perfect for call or fax centers.
1.2 www.siemon.com
8. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 4
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA-MAX Patch Panels
TERA-MAX 19 inch patch panels provide outstanding performance
and reliability in a shielded, high-density modular solution. As
outlets are snapped into place, resilient ground tabs assure that each
outlet is properly grounded. No secondary outlet grounding
operations are required, reducing overall installation time.
Cable Management
6 Integral rear cable manager facilitates the
orderly routing of horizontal cables as well
as maintaining proper bend radius for
optimum performance.
1 2 5
4
3
Slim Design
Use TERA outlets in TERA-MAX patch panel
for telecommunications room applications.
1 Standard Fit — Panels can be mounted 4 Installation Friendly — Individual modules
directly on standard 19 inch relay rack or snap into place, providing integrated
cabinet grounding without additional steps
2 Durable — Lightweight, high strength steel 5 Port Identification — Bold port numbering
with black or metallic finish enables quick identification of outlets
3 High Density — 24 10Gb/s ports in only 6 Angled TERA-MAX — Allows direct routing
1U — up to 96 ports with cable sharing of cables to vertical managers, eliminating
the need for horizontal cable managers
Integrated Grounding
Panels feature integrated grounding via
resilient ground tabs engaged during
module insertion.
TERA-MAX PATCH PANELS
Part # Description
TM-PNLZ-24-01 . . . . . . . . .24-port TERA-MAX panel, black, 1U
TM-PNLZ-24 . . . . . . . . . . . .24-port TERA-MAX panel, metallic, 1U
TM-PNLZA-24-01 . . . . . . . .24-port Angled TERA-MAX panel, black, 1U
TM-PNLZA-24 . . . . . . . . . .24-port Angled TERA-MAX panel, metallic, 1U
Panels include designation labels, cable ties and mounting hardware.
Note: 1U = 44.5mm (1.75 in.)
www.siemon.com 1.3
9. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 5
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA - Patch Cords
Part of the TERA cabling solution, TERA-to-TERA patch cords exceed
bandwidth of category 7A/class FA specifications when combined with
the TERA outlet. TERA delivers up to 1.2 GHz of bandwidth per pair,
providing the extra bandwidth for demanding applications like Broad- Standard Footprint
band Video, with an upper frequency requirement of 862 MHz. Facili- ISO recognized interface allows TERA cords
tated by 1- and 2-pair patch cords, TERA’s extended performance also and outlets to fit within a standard RJ45
footprint.
supports cable sharing — the simultaneous convergence of video,
voice and data onto a single 4-pair cable and outlet.
Fully Compatible With
3 5 Active Electronics
6 TERA to RJ45 patch cords allow the TERA
2
4 system to be easily connected to RJ45
equipped active electronics.
1
1 Standard Compliant Interface — 4 4-Pair TERA - to - Screened Augmented
Recognized within ISO/IEC 11801 Ed. 2.0 Category 6A MC modular plug for 1G/10G
4-Pair TERA - to - TERA supports category Ethernet performance Cable Sharing
2
7A/class FA performance to 10Gb/s and 5 1-Pair TERA - to - TERA for analog voice Multiple applications can be run over one
beyond and video patching. Video balun cord also 4-pair cable and outlet, saving significant
3 2-Pair TERA - to - Screened Category 5e available material and installation cost.
MC® modular plug for 10/100 Ethernet, VoIP 6 1-Pair TERA - to - RJ11 for analog voice
and video over IP
TERA FIELD-TERMINATED PLUG
TERA 4-pair plugs can be used to terminate horizontal cable in consolidation point applications. Plugs
terminate fully shielded category 7 and 7A solid cable.
Part # Description
T7P4-B(XX)-1 4-pair TERA plug with colored boot.
Compatible with 0.64 – 0.55mm (22 – 23 AWG) solid S/FTP and F/FTP cable
Use (XX) to specify boot color: 01 = black, 02 = white, 03 = red, 05 = yellow, 06 = blue, 07 = green
1.4 www.siemon.com
10. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 6
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA Patch Cords
TERA CATEGORY 7A PATCH CORDS TERA CATEGORY 5e COMPATIBLE PATCH CORDS
Category 7A compatible, TERA-to-TERA, LS0H cable TERA-to-Screened RJ-45, or TERA-to- 6 position (Voice) modular plug,
assembly, ivory jacket, colored boot. LS0H cable assembly, ivory jacket, colored boot.
T(X)-(XX)M-B(XX)L T(XXX)-(XX)M-B(XX)L
Plug Type:
Plug Type: Boot Color:
1 = 1-Pair 2E2 = 2-Pair, RJ-45, Boot Color:
01 = Black 05 = Yellow
4 = 4-Pair 10/100BASE-T 01 = Black 05 = Yellow
02 = White 06 = Blue
03 = Red 07 = Green 2UT = 2-Pair, RJ-45, 02 = White 06 = Blue
Token Ring 03 = Red 07 = Green
Cord Length: 1U1 = 1-Pair*, UTP,
6-position, Voice
01 = 1m (3.28 ft.) 03 = 3m (9.84 ft.)
02 = 2m (6.56 ft.) 05 = 5m (16.4 ft.)
Cord Length:
01 = 1m (3.28 ft.) 03 = 3m (9.84 ft.)
02 = 2m (6.56 ft.) 05 = 5m (16.4 ft.)
TERA CATEGORY 6A PATCH CORDS
Augmented Category 6A, TERA-to-Screened RJ-45 modular plug, LS0H
cable assembly, ivory jacket, colored boot.
T4(X)-S(XX)M-B(XX)L
Plug Type:
Boot Color:
A = T568B
T = T568A 01 = Black 05 = Yellow
02 = White 06 = Blue
03 = Red 07 = Green
Cord Length:
01 = 1m (3.28 ft.) 03 = 3m (9.84 ft.)
02 = 2m (6.56 ft.) 05 = 5m (16.4 ft.)
CLIP-(XX) . . . . . . . . . . . . . . . . . . Color coding clip, bag of 25
Clip Color
01 = Black 03 = Red 05 = Yellow 07 = Green
02 = White 04 = Gray 06 = Blue 09 = Orange
TERA VIDEO BALUN CORDS
TERA CATV baluns provide the optimum solution for the transmission of TV or CATV signals over structured cabling systems that were historically limited to voice
and data transmission. These products convert the unbalanced TV signals designed for coaxial cabling (75 Ω impedance) to balanced signals (100 Ω impedance)
as required for transmission over twisted pair (balanced) cabling. The TERA CATV adapters are specified and useable to 862 MHz. The 1-pair TERA to PAL and
TERA to "F" patch cords utilize an integrated balun. The 1-pair shielded TERA to shielded RJ45 patch cord allows connection to third-party RJ45 baluns.
Part # Description
T1VC-(XX)M-B01L . . . . . . . . . . . 1-pair TERA-to-PAL connector, LS0H cable assembly, gray jacket
T1VF-(XX)M-B01L . . . . . . . . . . . 1-pair TERA-to-F connector, LS0H cable assembly, gray jacket
T1S4V-(XX)M-B01L . . . . . . . . . . 1-pair shielded TERA-to-RJ45 patch cord
Use (XX) to specify length: 01 = 1m (3.28 ft.), 1.5 = 1.5m (4.92 ft.), 02 = 2m (6.56 ft.),
03 = 3m (9.84 ft.), 05 = 5m (16.4 ft.) T1VF-(XX)M-B01L T1S4V-(XX)M-B01L
www.siemon.com 1.5
11. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:06 AM Page 7
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA - S/FTP Trunking Cable
Assemblies
Siemon’s TERA copper trunking cable assemblies provide an efficient and
cost effective alternative to individual field-terminated components.
Combining factory terminated and tested TERA outlets and fully shielded
Siemon category 7A cable, Siemon TERA trunking cable assemblies offer
Data Centers
industry leading performance to 10Gb/s and beyond. Standard
Ideal for data center, raised floor and ladder
configurations also help maintain consistent cable layout, facilitate efficient rack environments enabling up to 75% faster
moves, adds and changes and significantly reduce scrap versus typical field deployment time. Well organized cable
installation. Modular design, in conjunction with reduced scrap, makes bundles improve cable management and air
trunks the most “Green” method for copper cabling installations. flow
1
4
2 3
Simple, Snap-In
Installation
Straight Cut aligns TERA outlets for optimal
snap in installation into TERA-MAX® patch
5 panels and allows left, right or center exit.
1 Proper Orientation — Each leg is 4 Identification — Each cable assembly is
labeled for proper outlet orientation coded with a unique identification
Fully Shielded Cable — Utilizes high number for administrative purposes
2
quality category 7A S/FTP Siemon cable 5 Breakout Kit — Unique breakout kit
3 Factory Terminated and Tested — creates optimal cable orientation and
Utilizes TERA outlets, factory terminated limits cable crossing
and tested for performance to 10Gb/s Protective Packaging
and beyond Each assembly is packaged individually to
protect factory terminations.
TERA S/FTP TRUNKING CABLE ASSEMBLIES
6 Leg Double-Ended Trunking Cable Assemblies:
Part # Description STRAIGHT CUT
TJRD6E-F7F7(XXX)F . . . . . . . . . Riser rated (CMR), blue jacket, 1000MHz
TJPD6E-F7F7(XXX)F . . . . . . . . . Plenum rated (CMP), blue jacket, 1000MHz
TJLD8E-F7F7(XXX)F . . . . . . . . . LS0H rated (IEC 60332-1), violet jacket, 1000MHz
Use (XXX) to specify length:
009-295 ft. in increments of 3 feet
Other lengths and configurations available upon request.
Note: These products are made to order. Call for lead time and part number availability in your region.
1.6 www.siemon.com
12. 01_TERA_2010.qxd:ZMax_Catalog 1/4/10 11:07 AM Page 8
C AT E G O R Y 7 A / C L A S S F A P R O D U C T S
TERA S/FTP 1000 MHz
4-Pair Cable (US)
COMPLIANCE
• ISO/IEC 11801:2002 (Category 7) Part # Description
• ISO/IEC 11801 Amendment 1 (draft) 9T7P4-E10-06-R1. . . . . . . . . . . Plenum (CMP, CSA FT6), Blue Jacket,
• IEC 61156-5:2002 (Category 7) 305m (1000 ft.) Reel
• IEC 61156-5 Ed 2.0 (Category 7A) 9T7R4-E10-06-R1. . . . . . . . . . . Riser (CMR, CSA FT4), Blue Jacket,
• UL CMR and CSA FT4 305m (1000 ft.) Reel
• UL CMP and CSA FT6
CABLE CONSTRUCTION
• S/FTP
• 0.64mm (0.025 in.) (22 AWG) solid bare copper
• 8.9mm (0.35 in.) [CMR], 8.4mm (0.33 in.) [CMP]
max jacket diameter
• Pairs individually shielded with aluminum-polyester foil
• Overall tinned copper braid
ELECTRICAL SPECIFICATIONS
DC Resistance <17.0 Ω/100m
DC Resistance Unbalance 2%
Mutual Capacitance 5.6 nF/100m
PHYSICAL PROPERTIES
Capacitance Unbalance <330 pF/100m
Characteristic Impedance 1-100 MHz: 100 ± 15% CMP CMR
(ohms) 100-250 MHz: 100 ± 22% Pulling Tension (max) 110N (25 lbf) 110N (25 lbf)
250-1000 MHz: 100± 25% Bend Radius (min) 50mm (2.0 in.) 50mm (2.0 in.)
NVP 80% Installation Temperature 0 to 60°C (+32 to 140°F) 0 to 60°C (+32 to 140°F)
TCL 40-10 log(ƒ) dB Storage Temperature -20 to 75°C (-4 to 167°F) -20 to 75°C (-4 to 167°F)
Delay Skew ≤20ns Operating Temperature -20 to 60°C (-4 to 140°F) -20 to 60°C (-4 to 140°F)
TRANSMISSION PERFORMANCE GUARANTEED WORST CASE SIEMON TYPICAL
Frequency Insertion Loss NEXT PS NEXT ACR PSACR ACR-F PS ACR-F Return Loss Propagation
(MHz) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) Delay
(ns)
1.0* 2.1 1.7 78.0 100.0 75.0 97.0 75.9 98.3 72.9 95.3 78.0 90.0 75.0 87.0 20.0 30.0 512 492
4.0 3.7 3.4 78.0 100.0 75.0 97.0 74.3 96.6 71.3 93.6 78.0 90.0 75.0 87.0 23.0 33.0 494 474
10.0 5.8 5.0 78.0 100.0 75.0 97.0 72.2 95.0 69.2 92.0 74.0 90.0 71.0 87.0 25.0 35.0 487 467
16.0 7.3 6.4 78.0 100.0 75.0 97.0 70.7 93.6 67.7 90.6 69.9 90.0 66.9 87.0 25.0 35.0 485 465
20.0 8.2 7.1 78.0 100.0 75.0 97.0 69.8 92.9 66.8 89.9 68.0 90.0 65.0 87.0 25.0 35.0 484 464
31.25 10.3 9.0 78.0 100.0 75.0 97.0 67.7 91.0 64.7 88.0 64.1 90.0 61.1 87.0 23.6 33.6 482 462
62.5 14.6 13.0 75.5 100.0 72.5 97.0 60.9 87.0 57.9 84.0 58.1 85.0 55.1 82.0 21.5 31.5 481 461
100.0 18.5 16.8 72.4 98.0 69.4 95.0 53.9 81.2 50.9 78.2 54.0 81.0 51.0 78.0 20.1 30.1 480 460
200.0 26.5 23.9 67.9 93.0 64.9 90.0 41.4 69.1 38.4 66.1 48.0 77.0 45.0 74.0 18.0 28.0 479 459
250.0 29.7 28.5 66.4 92.1 63.4 89.1 36.7 63.6 33.7 60.6 46.0 76.0 43.0 73.0 17.3 27.3 478 458
300.0 32.7 29.2 65.2 91.0 62.2 88.0 32.6 61.8 29.6 58.8 44.5 71.0 41.5 68.0 17.3 27.3 478 458
350.0 35.4 31.8 64.2 90.3 61.2 87.3 28.8 58.5 25.8 55.5 43.1 69.0 40.1 66.0 17.3 27.3 478 458
400.0 38.0 33.4 63.4 89.1 60.4 86.1 25.4 55.7 22.4 52.7 42.0 68.1 39.0 65.1 17.3 27.3 478 458
550.0 45.0 37.2 61.3 87.3 58.3 84.3 16.3 50.1 13.3 47.1 39.2 66.2 36.2 63.1 17.3 27.3 478 458
600.0 47.1 42.5 60.7 86.1 57.7 83.1 13.6 43.6 10.6 40.6 38.4 60.0 35.4 57.0 17.3 27.3 477 458
800.0 54.9 48.2 58.9 83.1 55.9 80.1 3.9 34.9 0.9 31.9 35.9 52.1 32.9 49.1 16.1 27.3 477 457
900.0 58.5 53.8 58.1 82.0 55.1 79.0 -0.4 28.2 -3.4 25.2 34.9 48.0 31.9 45.0 15.5 25.0 477 456
1000.0 61.9 57.5 57.4 81.0 54.4 78.0 -4.5 23.5 -7.5 20.5 34.0 46.0 31.0 43.0 15.1 24.0 477 456
*Values below 4 MHz are for information only All performance based on 100 meters (328 ft.).
www.siemon.com 1.7
16. 02_ZMax.qxd:02_ZMAX 2/12/10 3:18 PM Page 2
Z-MAX ™ NETWORK CABLING SOLUTIONS
DON’T BLINK
Best-in-class category 6A performance for UTP and Shielded in as little as 60 seconds
1 0:30 sec.
Prep cable and place into Z-MAX’s
patent-pending Zero-CrossTM lacing cap.
Close hinged cable retention/grounding clip.
2 0:45 sec.
Lace conductor pairs into color-coded
linear lacing channels and trim excess.
3 0:60 sec.
Insert lacing cap into Z-MAX outlet and
terminate with the one-step Z-TOOLTM.
Complete!
www.siemon.com 2.1
17. 02_ZMax.qxd:02_ZMAX 2/12/10 3:18 PM Page 3
Z-MAX ™ NETWORK CABLING SOLUTIONS
Siemon Innovations that make it possible. . .
Highest-Performing Category 6A Systems With Z-MAX, Siemon has shattered the RJ-45 bar-
rier. We have achieved best-in-class performance
through an innovative “matched” system which
Z-MAX Z-MAX
6A UTP 6A F/UTP combines an optimally tuned plug with a higher
performance outlet.
IL 3% 3%
NEXT 3.0 dB 3.0 dB
PSNEXT 3.5 dB 3.5 dB Best UTP and F/UTP category 6A margins
ACR-F 7 dB 7 dB Leading performance on all parameters, not just NEXT
PSACR-F 10 dB 10 dB Exceptional alien crosstalk performance
RL 3 dB 3 dB TIA channel, link compliant
PSANEXT 1 dB 10 dB ISO channel, link (draft) compliant
PSAACR-F 1 dB 5 dB
Consistent, superior performance,
ACR-N 6 dB 6 dB
PSACR-N 6.5 dB 6.5 dB eliminates marginal reporting (*PASS)
Performance based on use of 2M cords and 24 cords and 24 port /1U density.
Because we continually improve our product, Siemon reserves the right to
change specifications and availability without prior notice.
Patent-Pending Smart Plug Technology
A critical element of Z-MAX systems’ exceptional performance is our smart-plug technology.
The Z-MAX smart plug contains a tuned printed circuit board (PCB), normally only found in out-
lets, to achieve high performance tuning. This advancement in miniaturization has packaged the
tuning capability and consistency of a PCB in an industry standard RJ-45 footprint, giving the
Z-MAX patch cord unsurpassed performance capabilities.
Patent pending PCB-based plug enables performance levels not
possible with traditional cords
Narrower NEXT range provides capability to tune to higher channel
performance levels
Advanced contact technology and automated assembly results in
decreased performance variability compared with crimp-type plugs
Smart-Plug is fully backwards-compatible and standards compliant
Eliminates pair PCB-based contacts eliminate pair-crossing condition present in
untwist required in traditional cords
standard RJ-45 plugs
2.2 www.siemon.com
18. 02_ZMax.qxd:02_ZMAX 2/12/10 3:18 PM Page 4
Z-MAX ™ NETWORK CABLING SOLUTIONS
Zero-Cross™ Terminations
The crossing of cable pairs has long been recognized as a source of variability and performance
degradation in connector systems. The linear design of the Z-MAX termination module allows
conductors to feed naturally into position without the need for pair crossing.
Linear design dramatically speeds and simplifies cable prep and con-
ductor alignment
Removes a significant source of noise and interference present in all other
RJ-45 outlets
Maintains and protects cable pair structure for optimized transmission
performance consistency
Intuitive cable lacing significantly minimizes miswires that lead to costly
reworks
Diagonal IDC Contact Orientation
Siemon engineers thought “outside of the box” when they developed our diagonally-oriented IDC contact
technology. This unique configuration places contacts on a single plane yet varies the alignment of each
individual contact within the Z-MAX outlet. This design provides distinct performance benefits compared
with traditional rectangular contact layouts.
Maximizes pair-to-pair separation from adjacent outlets to miminize alien crosstalk
even in the most dense category 6A patching environments
Enhances NEXT performance within outlets
Limits untwist of pairs at termination to maximize cable performance
Fully enclosed IDC’s eliminates exposure of uninsulated conductors
www.siemon.com 2.3
19. 02_ZMax.qxd:02_ZMAX 2/12/10 3:18 PM Page 5
Z-MAX ™ 6A SHIELDED
Z-MAX 6A Shielded System
Features and Benefits
Combining consistent best-in-class performance, unparalleled usability and speed of termination
with the security and robust noise immunity of a shielded cabling system, Siemon’s Z-MAX 6A
shielded end-to-end solution represents the cutting edge of category 6A cabling. The Z-MAX 6A
shielded system provides the highest margins on all TIA and ISO performance requirements for
category 6A/class EA, including critical alien crosstalk parameters.
Siemon’s Z-MAX 6A shielded channel consists of the shielded Z-MAX 6A outlet, Siemon category 6A
F/UTP cable and Z-MAX patch panels as well as shielded, stranded or solid cord options.
Standards Compliance
ISO/IEC 11801: 2002 Amendment 1 (Class EA)
TIA/EIA-568-B.2-10
IEEE 802.3an
UL-listed
Z-MAX 6A F/UTP Performance
GUARANTEED 4-CONNECTOR CHANNEL MARGINS TO ISO/IEC 11801: 2002 AMENDMENT 1 (Class EA)
PARAMETER VALUE
IL 3%
NEXT 3 dB
PSNEXT 3.5 dB
ACR-F 7 dB
PSACR-F 10 dB
RL 3 dB
PSANEXT 10 dB
PSAACR-F 5 dB
ACR-N 6 dB
PSACR-N 6 dB
2.4 www.siemon.com
20. 02_ZMax.qxd:02_ZMAX 2/12/10 3:18 PM Page 6
Z-MAX ™ 6A SHIELDED
Z-MAX 6A Shielded Outlets
The shielded Z-MAX outlet offers best-in-class performance in every critical specification,
exceeding all category 6A performance requirements, including alien crosstalk. Its innovative
features not only speed and simplify termination, but remove installation variability for
consistently high and repeatable performance - every termination, every time!
3
Flexibility and
Simplified Ordering
A single hybrid outlet supports
4
2 both angled and flat mounting
orientations
1 6 Enhanced Shielding
Effectiveness
5
High level of shielded effectiveness
exceeds ISO 360 degree shielding
requirements via die cast housing and
1 Fastest Termination Time – Zero-Cross™ 4 Guided Termination Features – Linear hinged cable retention/grounding clip
termination module and Z-TOOL™ lacing channels guide correct
termination process combine for conductor placement while 2-sided
best-in-class termination time color-coding provide wiring verification 100% jack-to-jack
before and after lacing plastic isolation
2 High-Visibility Icon System – Printed
Plastic bezels prevent contact between
icons allow designation for voice / data
5 Color Coding Capability – Bezel allows metal housings when side stacking to
applications and also provide an
outlets to be color coded for customer ensure ground quality and ANEXT
additional color coding option
identification to match faceplates and performance
3 Compact – Slim and side-stackable for other mounting accessories
high-density applications. Supports
6 Robust Hinged Cable Retention/Grounding Quick-Ground™
“pass-thru” feature to mount from the
– Clip accommodates multiple cable Termination
front or rear of a faceplate
diameters Cable shield is automatically terminated
to the outlet without additional steps
Ordering Information:
Z6A-S(X)(XX) - Shielded Z-MAX 6A outlet, T568A/B
Bezel Color
01 = Black 07 = Green
Mounting Style 02 = White 09 = Orange
(Blank) = Hybrid Flat/Angled 03 = Red 20 = Ivory
K = Keystone 04 = Gray 80 = Light Ivory
05 = Yellow
Hybrid Keystone
06 = Blue
Add “B” to end of part number for bulk project pack of 100 modules (hybrid outlets include icons).
Add “D” to end of part number for spring door option.
Outlet terminates S/FTP, F/FTP and F/UTP cable constructions with 23 – 26 Each Z-MAX 6A hybrid outlet includes 1 printed icon set
with the following color/print options.
AWG (0.64 – 0.51mm) solid and 26 AWG (0.48mm) stranded conductors,
Additional color options available.
with up to 0.60mm diameter conductors and up to 1.48mm diameter over
Front
insulation.
1 - Red Data 1 - Red Voice
1 - Blue Data 1 - Blue Voice
1 - Bezel Color-matching Data 1 - Bezel Color-Matching Voice
Note: Z-MAX 6A Shielded outlets utilize MAX faceplates 1 - White Blank 1 - Bezel Color-Matching Blank
Z-MAX outlets utilize the Z-TOOL termination tool. Rear
www.siemon.com 2.5
21. 02_ZMax.qxd:02_ZMAX 2/12/10 3:19 PM Page 7
Z-MAX ™ 6A SHIELDED
Z-MAX 6A Shielded
Modular Cords
Combining the unparalleled performance of an exclusive PCB-based
plug, noise-resistant shielded construction and a host of innovative
user friendly features, the shielded Z-MAX 6A modular cords are the ul- Excellent Bend Relief
timate category 6A cord. All cords are 100% factory-tested to ensure Boot ensures proper bend relief
performance and compliance. and maintains minimum bend
radius requirements
5
4
1
2
Colored Clips
Removable clips allow field color
3 coding even when cords are
6 connected
1 Integrated PCB – PCB equipped smart 4 High Performance Cable – Patch cords
plugs optimize signal tuning for feature category 7 S/FTP stranded cable
exceptional transmission for optimal transmission performance
2 Superior Performance Consistency – while eliminating alien cross-talk
Rear contacts maintain pair twist to point 5 Low Profile Boot Design – Optimizes
of termination and provide robust strain side-stackability of patch cords and
Solid Cord Option
relief allows use in even the most dense
Solid F/UTP assemblies are
3 Fixed Front Contacts – Ensure proper patching environments
available for consolidation point
mating with outlets to eliminate the 6 Cantilevered Latch – Allows latch and equipment cord applications
performance variability of traditional activation from further back on the boot
crimp-style terminations for superior accessibility in high density
environments
Ordering Information:
ZC6A-S(XX)(X)-(X)(X) . . . . . . Z-MAX 6A shielded (F/UTP) solid modular cord,
ZM6A-S(XX)-(XX) . . . . . . . . . Z-MAX 6A shielded (S/FTP), double-ended, blue jacket, clear boot
stranded modular cord, clear boot, T568A/B, LS0H
Plugs
Jacket Color Jacket Type (Blank) = Single-ended
Length P = Plenum D = Double-ended (T568A/B)
01 = Black 05 = Yellow
03 = 3 ft.* 02 = White 06 = Blue Length Wiring R = Riser
05 = 5 ft.* 03 = Red 07 = Green 10 = 10 ft. A = T568B
07 = 7 ft. 04 = Gray 09 = Orange 20 = 20 ft. T = T568A
10 = 10 ft. 30 = 30 ft.
15 = 15 ft. 40 = 40 ft.
20 = 20 ft. * 7ft. or longer cords required for Z-MAX 6A Warranty 50 = 50 ft.
60 = 60 ft.
Add “B” to end of part number for bulk project pack of 100 cords.
CLIP-(XX) . . . . . . . . . . . . . . . . . . Color coding clip, bag of 25
Clip Color
01 = Black 03 = Red 05 = Yellow 07 = Green
02 = White 04 = Gray 06 = Blue 09 = Orange
2.6 www.siemon.com
22. 02_ZMax.qxd:02_ZMAX 2/12/10 3:19 PM Page 8
Category 6A Shielded
CATEGORY 6A SHIELDED BLADEPATCH ™
BladePatch™ Modular Cords
Category 6A shielded BladePatch patch cord offers a unique category
6A solution for high-density patching environments. It features an
innovative push-pull boot design to control the latch, enabling easy
Universal Compatibility
access and removal of the cord in tight-fitting areas. The BladePatch Fits within any standard RJ-45 outlet.
cord is ideal for patching blade servers, patch panels, or any equipment
with high density RJ-45 outlets.
Push-Pull Boot 6
Activates Latch
3
5
Revolutionary Latch
1 Simply push the boot forward to latch into
2 4 the outlet and pull back to release.
1 Revolutionary Design — Patented push- 4 Low Profile Boot Design — Optimizes side-
pull latch design eliminates need to defeat stackability of patch cords and allows use in
thumb latch used in standard modular plug even the most dense equipment
designs. Enables easy access and removal in 5 High Performance — Cords feature
high density patching environments category 7 S/FTP stranded cable for optimal
2 Universal Wiring — Compatible with transmission performance while eliminating
T568A/B wiring schemes alien crosstalk High Density
3 Snagless — Push-pull design eliminates 6 Backwards Compatible — With category The push-pull design enables easy access
external thumb latch which can snag and 5e/class D and category 6/class E systems and removal via the push/pull boot in
break and components tight-fitting areas.
Ordering Information:
Shielded category 6A BladePatch LS0H, double-ended, RJ-45 modular patch cord
with push-pull latching design, color matching cord/boot, T568A/B.
10GBPS-(XX)M-(XX)L
Cord Length: Cord Color:
01 = 1m (3.3 ft.) 01 = Black
1.5 = 1.5m (4.9 ft.) 02 = White
03 = Red
02 = 2m (6.6 ft.)
04 = Gray
03 = 3m (9.8 ft.) 05 = Yellow
04 = 4m (13.1 ft.) 06 = Blue
05 = 5m (16.4 ft.) 07 = Green
The use of Category 6A shielded BladePatch modular cords
will provide Category 6A channel performance if used in a
Z-MAX 6A system. Z-MAX 6A warranty margins do not apply.
www.siemon.com 2.7
23. 02_ZMax.qxd:02_ZMAX 2/12/10 3:19 PM Page 9
Z-MAX 6A Shielded Patch Panels
Z-MAX ™ 6A SHIELDED
Z-MAX patch panels provide outstanding performance and aes-
thetics in a shielded, high-density modular solution. The Z-MAX
panels provide rapid and reliable installation by accelerating
outlet mounting, grounding, and cable tie-down operations.
In addition to traditional 24 port / 1U flat and angled versions, the
Z-MAX shielded panels are also available in 48 port / 1U configu-
rations for ultra high density installations. Installation Friendly
Quick-Snap feature allows Z-MAX panel
outlets to quickly be inserted and removed
1
2
4 3
Trunking Applications
Combine Z-MAX trunk assemblies (with
panel outlets) and empty Z-MAX panels
for rapid data center deployment
5
1 High-Density – Provides up to 48 ports 4 Flexible – Both flat and angled panel
in just 1U to reduce valuable rack/cabinet options
space consumption Integrated Quick-GroundTM – Panels
5
2 Port Identification – High visibility feature embedded conductive strips to
magnifying labeling system enables quick automatically ground Z-MAX modules to
Kits
identification of outlets panel upon insertion
Panels available as complete kits
3 Durable – Lightweight, high strength including patch panel, Z-MAX panel
steel with black finish and scratch/fade outlets and all necessary accessories.
resistant port marking Empty panels are also available for
use with Z-MAX trunk assemblies
Ordering Information:
Z6AS-PNL(X)-24(X)...........24 Port, Z-MAX 6A shielded patch panel, 1U, black
Outlets
K = Kit w/ 24 Z-MAX panel outlets
Mounting Style E = Empty (no outlets) for use with trunks
(Blank) = Flat
A = Angled
Z6AS-PNL(X)-U48(X).........48 Port, Z-MAX 6A shielded patch panel, 1U, black
Panel Accessories
Outlets
Z-PNL-PL24...........Patch panel label sheet, numbered 1 to 24, bag of 100
K = Kit w/ 48 Z-MAX panel outlets
Mounting Style Z-PNL-PL48...........Patch panel label sheet, numbered 25 to 48, bag of 100
E = Empty (no outlets)
(Blank) = Flat Z-PNL-PS ..............Patch panel label holder, bag of 25
A = Angled Z6A-SP .................Z-MAX 6A shielded panel outlet
Panels include: Cable Ties, Icon/Label Holders, Labels, #6 AWG Grounding
Lug, and Mounting Hardware Note: Z-MAX shielded panels designed for use with Z-MAX
shielded panel outlets only
2.8 www.siemon.com
24. 02_ZMax.qxd:02_ZMAX 2/12/10 3:19 PM Page 10
®
TERA -MAX Patch Panels
Z-MAX ™ 6A SHIELDED
TERA-MAX patch panels provide outstanding performance and reliability
in a shielded, high-density modular solution. As outlets are snapped into
place, resilient ground tabs assure that each outlet is properly grounded
for maximum protection from outside interference. No secondary outlet
grounding operations are required, reducing overall installation time.
Integrated Grounding
Panels feature integrated grounding via
resilient Quick-Ground™ tabs automatically
engaged during Z-MAX outlet insertion.
4
2 Single Outlet Solution
1 Hybrid (flat/angled) shielded Z-MAX outlets
used in the work area are required for use
in TERA-MAX panels creating a common
3 outlet solution for all locations
1 High Density – 24 10G/bs ports in 3 Durable – Lightweight, high strength
only 1U steel with black or metallic finish
2 Port Identification — Bold port 4 Angled TERA-MAX – Allows direct
numbering enables quick identification of routing of cables to vertical managers, Future Flexibility
outlets eliminating the need for horizontal cable TERA-MAX panels also accept TERA
managers outlets to support potential future
infrastructure upgrades
Ordering Information:
Part # Description
TM-PNLZ-24-01 . . . . . . . . .24-port TERA-MAX panel, black, 1U
TM-PNLZ-24 . . . . . . . . . . . .24-port TERA-MAX panel, metallic, 1U
TM-PNLZA-24-01 . . . . . . . .24-port Angled TERA-MAX panel, black, 1U
TM-PNLZA-24 . . . . . . . . . .24-port Angled TERA-MAX panel, metallic, 1U
Panels include designation labels, cable ties and mounting hardware.
Note: TERA-MAX panels are designed for use with hybrid (flat/angled) shielded Z-MAX outlets. Also compatible with TERA outlets
www.siemon.com 2.9