The Carvin V3 100-watt tube guitar amplifier delivers pure tone from warm to shimmering sustain across its three channels for genres from blues to metal. It impressed those at a boutique amp store with its tone that exceeded amps from Bogner, Mesa Boogie, and Diezel. The V3's all-tube signal path and rugged construction allow it to keep players performing night after night.
2. The V3 ’s 100% tube signal path CUSTOMER REVIEW
A Carvin V3 owner took
d e l i v e r s pure tone from warm his amp into a boutique
amp store and put the
to shimmering to infinite sustain V3 head to head with the
and crunch for all generations. following amps:
Three channels of expanded tone cir- Bogner Uberschal
VHT Deliverance
cuits and overdrives for everything from Deizel Herbert
Blues to Metal. Total control with MIDI Mesa Road King
Bogner Ecstasy 101B
and Smart Loops™. “Every single person who
Built like a tank, the V3’s ruggedness walked in the amp room was
absolutely amazed by what
keeps you playing night after night. they were hearing. No one
Made in the U.S.A. believed that the V3 could
sound that good. To say we
Wayne Findlay were all shocked is the under-
MSG / Slavior
statement of the year. Jaws
were hitting the floor at an
alarming rate. Boutique amp
owners nearby were blush-
ing with envy and the Carvin
website was pulled up on
their computers behind the
counter before I could leave
the store.
I’ve played every high dol-
lar, high gain, good tone’d
boutique dream amp I can
think of and not a single one
of them can offer anything
LED backlit V3LED compelling, either tone wise
Rear panel lighting option. Assign your channels or feature wise, that Carvin
hasn’t either met or exceed-
from hot red to cool blue to warm amber or any AMP HEAD ed. The sheer power and
combination up to 7 colors. Color changes with V3 usability of this amp’s gain is
channel switching. See carvinworld.com/V3LED incredible. The low end will
100w 3 Channel Tube Amp Head shake the walls and the highs
for demo Options: V3DIA Diamond Front Panel (self install) $45 are smooth, fluid and glassy.
CV3200 cover This is truly a boutique toned
12AX7 EL34 Channel 1 & 2 Overdrive nu-metal, old metal, hard
Master Controls Channel 3 Clean rock, classic rock, jazz and
MASTER VOLUME: Controls output of all 3 3 DRIVE MODES: 3 DRIVE MODES: blues amp all wrapped into a
channels. Boost or cut your entire rig with a) “CENTER” - a classic rich, open clean a) “CENTER” - a classic rich, open over- perfect, low priced solution.”
-Drew Lankford
one control. sound with lots of headroom. Turning up drive with lots of headroom. Turning up Read the full review at:
the DRIVE adds tube warmth and sag. the DRIVE knob adds sustain and warmth. www.carvinworld.com/v3re-
BOOST: Add up to 9 dB of volume boost via
view.php
FS44 footswitch and MIDI. b) “BRIGHT” - adds high end to the preamp, b) “THICK” - brings on the chunk with a
BRIGHT: Boost highs starting at 5kHz for
inviting high frequencies to chime and sus- massive low-end, textured mids and blis- Rear Panel
tain as the DRIVE is turned up. tering highs. Turning up the DRIVE knob
added clarity. Simulate closed or open back a) LINE OUT: Plug into a mixer or recording
adds sustain to the highs, grit to the mids
cabinets. c) “SOAK” - boosts all preamp frequencies. device. b) LINE OUT LEVEL: Varies the out-
with low-end bark.
MID CUT: A unique mid cut helps dial in a As the DRIVE is turned up, a vintage snarl put at the 1/4” output to prevent overload-
master scooped tone from mild to extreme. emanates from the amp. c) “INTENSE”- the most gain and sustain ing your mixer.
with notes that leap out with startling c) CABINET VOICING: Simulates a speaker
DEEP: Adds low frequencies at the sub-har- EQX: Toggle between standard EQ and
articulation. The low-end is deep and per- cabinet response.
monic level Expanded EQ. This switch opens a wider
cussive. Mids and highs smoothly blend
frequency range for the TREBLE, MID and LOOP 1: Series configured effects loop.
SMART LOOPS: Total control of your and still cut through. Turning up the Drive
BASS. The TAIL switch enables a long “tail effect”
effects, remembers your effects loop set- stretches the envelope of sustain to the
allowing the effect to be heard after the
tings for each channel. Just assign a loop(s) PRESENCE: Boost 11 kHz for glassy, shim- edge.
loop has been switched off.
to the currrent channel, Smart Loop™ per- mering highs
Shown in Country Western Vinyl EQX: Toggle between standard EQ and
manently saves it until you change it. LOOP 2: Parallel configured effects loop
Expanded EQ. This switch opens a wider
with return level control and TAIL switch.
frequency range for the TREBLE and BASS.
MIDI IN & THRU: Use with standard MIDI
PRESENCE: Boosting 8 kHz to help cut
controller. Easy control of all channels, vol-
through
ume boost and Smart Loops™.
FOOTSWITCH JACK: FS44: Remote switch-
ing of 3 channels plus volume boost. FS22:
Controls both effects loops (MIDI not
required).
Shown in Navy Bronco Vinyl
COMBO OUTPUT 1 & 2: Parallel outputs for connect-
V3 Head /Combo Specs V3212 ing two speaker cabinets. Impedance selec-
2 GT12 speakers tor 4, 8 & 16 ohms.
Output Power: 100 watts/50 watts
OPTIONAL
Input Impedance: 220k ohms V3212-30 2 Celestion Vintage 30 100W/50W SWITCH: Get increased power
Output Impedance: 4, 8, or 16 ohms speakers tube saturation at lower levels in 50w
CABINETS COLORS
5 - 12AX7 and 4 - matched EL34s mode.
412VT/412VB Effects Loops: Buffered BIAS SWITCH: Choose between EL34, 5881
4 GT12 speakers SEE CARVINWORLD.COM MIDI IN/THRU
Top & Bottom 4x12 Cabinet or 6L6GC power tubes, set the BIAS to
FOR ALL COLORS & PRICES 120VAC, 300VA, circuit breaker FS44 3 Channels + vol boost
Closed back• Impedance: Stereo (8Ω) Mono match the tubes.
Size: 60cm W x 24cm D x 26cm H, 16 kgs
(16Ω) Premium 13-ply Poplar Hardwood,
Metal corners, Metal grill, 300w
• Size: 77cm W x 37cm D x 77cm ”H, Wt 41 kgs
CELESTION VINTAGE 30 OPTION MADE IN
412VT-30/ 412VB-30
USA
32 carvinworld.com carvinworld.com 33
3. LEGAC Y II is a dream amp.
“The Legacy
II • 3 Channels - Clean,
3 Channel LEGAC Y 2 Channel
MADE IN
USA
Clean Boost, Lead
It’s simple, versatile and the sound is creamy and warm. • Master Volume 12AX7 EL34
Finally there is an amplifier that has a MasterVolume
control that can raise or lower the overall sound coming
out of the speakers without changing its saturation or
tone. Although the sound has retained the integrity of
the original Legacy, there is now an added channel that
acts as a boost on the clean channel giving it a bit more
hair. No need to keep dreaming, it’s here”
C412T/C412B
Legacy Top & Bottom 4x12
Cabinet
Features four Celestion™ G12
Vintage 30, 60w speakers
MADE IN 240 watts. closed back
USA
• Impedance: 16Ω • Metal cor-
ners, Metal grill • Size: 30W x
14.5D x 30”H, Wt 92 lbs
Optional CVS412T
C212E
or CVS412B cover Legacy Extension
Optional CTS4 removable Cabinet
casters Features two Celestion™ G12
Vintage 30, 60w speakers
C412T2/C412B2
Legacy II Top & Bottom 4x12
C412 specs
• Size: 77cm W x 37cm D x 77cm ”H,
Wt 41 kgs
cover & pg 52 photo: Neil Zlozower
VL212
100w Legacy combo
Features two Celestion™ G12 Vintage 30, 60w speakers
• 120w closed or open back cabinet • Imp: 8Ω
• Size: 26W x 10.25D x 21”H, Wt 74 lbs
“When Steve Vai personally asked
me to redesign his signature
series Legacy guitar amplifier, I was
truly excited about the project. The
new Legacy 2 includes tricks and
tweaks I’ve developed over 15 years
of custom tube audio design work. FS22
Footswitch for CH Select & Effects
The result is a powerful blend of
high end boutique sound and
rock-solid American manufacturing.
If you’re looking for singing sustain,
organic harmonic complexity, and
roadworthy features that work in VL100
the real world, there’s simply not a 100w Steve Vai Legacy Head
better amplifier than the new Carvin FS22 Footswitch CV3200 cover
34 Legacy 2”
Benjamin Fargen, fargenamps.com
VL2100 HEAD/ VL2212 COMBO
VL2100 • Three channels (clean, clean boost & lead) • Master Volume • Volume, Bass, Mid, &
100w Steve Vai Legacy II Head Treble for Clean and Lead channel & Presence for Lead channel • Tone, Drive & Volume SPECS: VL100 HEAD/ VL212 COMBO • Dual channels (clean & overdrive/sustain) • Separate
CV3200 cover / FS33L Footswitch Volume, Bass, Mid, Treble & Presence for each channel. Master Reverb for both channels • 50/100W
for Boost channel. • 25/50/100w output switch • five 12AX7 & four matched EL34s • output switch • five 12AX7 & four matched EL34 • All tube design • Bias switch for 5881, 6L6GC or EL34
All tube design • Bias switch for 5881, 6L6GC or EL34 • Cabinet voiced line output • 4,
8 or 16Ω speaker imp. switch • Effects Loop • Hand crafted 13-ply premium Poplar • Cabinet voiced line output • 4, 8 or 16Ω speaker imp. switch • Effects Loop • Hand crafted 7-ply poplar
12AX7 EL34
wood cabinet • Optional FS22 foot switch for selecting channels & reverb • Dim VL100: 24.5W x 10.5H x
Hardwood cabinet • Optional FS33 foot switch for selecting channels • Dim VL2100: 9.5”D, WT: 37 lbs. • Warranty: 1 year
Optional FS33L Footswitch 62cm W x 24cm H x 26cm D, WT: 18 kgs.
34
34 carvinworld.com carvinworld.com 35
35
4. X100B Series IV VINTAGE SERIES GUITAR AMPS
Vintage 16
16/5w Pentode/Triode Vintage Amp
Vintage16-30 with Celestion Vintage 30’s
The 16w or 5w Triode driven Vintage
16 is the ultimate tone machine for
12AX7 EL84
studio work. The awesome GT12
speaker provides the sweetest sound
for both single coil and humbuckers.
The secret is the SOAK control for MADE IN
creamy cleans to crunch. This is
definetly not a one tone amp with
USA
it’s wide bass, mid and treble con-
trol range. Dail in the tube driven
Accutronics™ reverb and your in vin-
tage tone heaven! USA hand crafted
in a plywood tweed enclosure.
AMP HEAD
MADE IN
X100B
2 Channel 100w Head
Nomad Shown in Hot
White Bronco
USA
50w Single 12” Vintage Amp Vinyl
Optional CV3200 cover
12AX7 6L6 Nomad-30 with Celestion Vintage 30’s
The X100B series tube amps were a mainstay on many arena stages 12” Nomad, dual 12” Bel Air combo & head
and MTV videos throughout the 1980’s. Artists such as Frank Zappa, • 2 channels - Clean & Soak - separate BASS/MID/
TREBLE
Craig Chaquico with Jefferson Starship, Warrant, Warren Cuccurullo with • Ideal for both mic’d recording and small stage rigs
Missing Persons, and Steve Vai all • SOAK control - clean crunch to sweet vintage over-
played X100B amps. Frank Zappa drive
raved about the Clean channel on • All tube - 12AX7 preamp tubes, EL84 power tubes
this amp. Steve Vai recorded a song • Clean channel Acoustic PRESENCE for shimmering
called “Blue Powder” (available on his highs
CD Passion and Warfare) featuring • Tube driven Accutronics™ 3 spring tank reverb
the X100B. • Metal shaft controls, Ivory knobs, red jewel lamp
The release of Series IV includes a • Premium 13-ply Poplar Hardwood enclosure
shown in black vinyl • Heavy-duty GT12 12” speakers
master volume switchable to boost
• Output: 50 watts - 4Ω, 8Ω and 16Ω Impedance
mode and a 4 button optional foot-
switch
switch with LED indicators (Channel, Effects, Reverb, Boost).
• External Effects Loop with preamp OUT / power
X100B HEAD/COMBO shown in standard tweed amp IN jacks
• Dual channels: Clean & Lead FS44L
Footswitch for CH & Effects with vinyl • 112 NOMAD: 50cm W x 26cm D x 45cm H, 18 lbs.
• Master volume with switchable boost LED’s CUSTOMER COMMENT • 212 BEL AIR: 66cm W x 26cm D x 45cm H, 23kgs
I could not have found a better amp
• Bass, Mid, Treble, Presence and Reverb controls anywhere. Nomad – Hoy Wood, VA
• 5 band graphic EQ assignable to
clean or lead channel
• 25/50/100W output switch
• Four–6L6GC & Three–12AX7A
• Bias switch for 5881, 6L6GC’s or EL34
Bel Air
50w Dual 12” Vintage 112E EXTENSION CABINET
power tubes Single heavy-duty GT12 12”
Amp speaker, 8Ω
• Cabinet voiced XLR balanced output 49cm W x 26cm D x 45cm H.
• Foot switchable Effects Loop Wt. 11kgs.
BelAir-30 with 112E-30 with Celestions
Celestion Vintage 212E EXTENSION CABINET
CELESTION VINTAGE 30 OPTION 30’s Two heavy-duty GT12 12”
speakers, 8Ω
AVAILABLE ! 66cm W x 26cm D x 45cm H. Wt.
15kgs.
Shown in Hot 212E-30 with Celestions
White Bronco
Vinyl FS22
Footswitch for Channels &
Dual 12” Effects
shown in black vinyl
CABINETS TUBE POWER AMP TS100
100w Tube Power Amp
GX412T/GX412B
GX412T-30/ GX412B-30 MADE IN
w/ Celestion Vintage 30’s
Top & Bottom 4x12 Cabinet USA
4 GT12 speakers Closed back (Vintage
30 speakers optional) • Premium 13-ply
Poplar Hardwood, Impedance: Stereo (4Ω) • Pristine clean, warm all-tube performance • 4, 8 & 16 ohm impedance, bridge, parallel, and ground
Mono (8Ω) • Size: 77cm W x 37cm D x 77cm X212B • All tube design 4 12AX7 tubes
• 4 6L6’s matched output tubes
lift switches
• Premium built including brass bushing for controls
”H, Wt 41 kgs 2 Channel 100w Combo
Optional CVS412T/CVS412B cover • Internal bias selection switches for both CH (EL34 or • All steel chassis with Chrome front panel and knobs
GT12 speakers, 17 kgs. CV3212 cover 6L6/5881) • Dim: 2U 9cm H x 48cm W x 25cm D
Optional CTS4 removable casters 12AX7 6L6
X212B-30 with Vintage 30 speakers • Front panel power, stand by,volume and presence • Wt: 11kgs
36 carvinworld.com 37 controls carvinworld.com 37
5. BX500 500w mono block bass amp POWERFUL /COMPACT /LIGHTWEIGHT - UNDER 3kgs MADE IN
USA
BX500
500 watts RMS - 5.8 LBS
Warm 12AX7 Tube
Cool Running CLASS D
3 EQ Sections
500w 4/2 ohms
REVIEW
“The sound is very linear and natu-
ral…Surprising volume and low-
end…The BX500 amp is six pounds
of power with a metric ton of pro fea-
tures”
– Vintage Magazine - Phil Feser
The BX500 is a sleek bass head with easy to read instrument • A conveniently located Mute switch and an Active/Passive
knobs offering an array of features - 3 EQ sections, 12AX7 switch tailors the input for different pickup configurations
tube, high power and an ultralight 5.8 lbs chassis. Beneath • Two combination Speakon™ - 1/4” outputs, 2 ohm operation
the sharply dressed exterior, the BX500 has unsurpassed ver- switch, footswitch, balanced XLR, tuner/headphone output,
satility, great power and useful features to help you get any effects loop and tube bypass switch are located on the rear panel
sound you want. • The CLASS D output feature high current, high speed FET’s
• 300w RMS at 8 ohm, 500w at 4 ohm and 500w at 2 ohm for continuous 2 ohm operation
• A rich, warm 12AX7 tube drives the Class D power amp • The Switchmode power supply operates at 100,000 Hz
• A powerful 4-band, two sweep tone control section offers delivering maximum efficiency while reducing weight.
parametric frequency changes to the LOW MIDS and HI MIDS • The head runs cool from its 94% efficiency - no wasted
along with the BASS and TREBLE controls for unlimited num- heat or energy from the AC plug
ber of options for dialing in your sound • Auto-switching AC input for 120V 60 Hz or 240V 50 Hz
• The 9-band graphic EQ is footswitch-able, as well as via a • Size: 35cm W x 22cm D x 7cm H, Wt 2.6 kgs Optional BX500RP 2U rack mount kit
switch on the front plate for great control of your overall tone with rackmount kit: 48cm Wx 23cm Dx 9cm H Optional SV2 2U rack mount case
• A single knob controls the optical compressor with an auto • Made in the USA. For information, go to carvin.com/BX500
limiter to keep your peaks in check Optional FS22 footswitch for
mute & 9 band EQ
• A Drive knob, plus Master Volume easily controls all your levels
BR510 Bass Combo
BR515 Bass Combo The BR510 features two NEO 10-inch driv-
ers for brilliant bass. High power from the
The BR515 is our most powerful bass combo
amp featuring the Rack Mount BX500 head. Rack Mount BX500 delivers 300w at 8
Its impressive 300w RMS at 8 ohms is fed ohms into both drivers. The beauty of this
into one the finest NEO 15-inch and Titanium system is you can add an BR18N-8 18’inch
HF drivers on the market today. Unsurpassed sub woofer making it an unbeatable combo.
tonal flexibility comes from the warm 12AX7 Unsurpassed tonal flexibility comes from the
tube and 3 different EQ sections including warm 12AX7 tube and 3 different EQ sec-
dual sweep parametrics and a 9 band EQ – tions including dual sweep parametric’s and
just-dial in to enhance any tone. Expect an a 9 band EQ – just dial-in to enhance any tone.
40 Lbs abundance of deep resonate bottom-end with High output with great bottom-end, plus natu-
natural, crisp highs making any bass sound ral, crisp highs makes any bass sound great,
fabulous, plus its ultra-light, portable design plus its ultra-light, portable design is a bonus
is a bonus for any professional player. for any professional player.
• The 15-inch Neodymium woofer features a • Two 10-inch Neodymium woofers are de-
huge 3” voice coil designed for 600w RMS signed for 300w RMS each so you’ll never
so you won’t over-power the drivers over-power the drivers
• Premium 13-ply Poplar hardwood bass reflex • Premium 13-ply Poplar hardwood bass reflex
enclosure for solid bass response enclosure for solid bass response
• The large 1.5-inch titanium compression • The large 1.5-inch titanium compression
HF driver delivers a max SPL of 126 dB HF driver delivers a max SPL of 126 dB
for crisp harmonics at high levels enhancing for crisp harmonics at high levels enhancing
your tone your tone
• A 2-W crossover with an Attenuator for -3, • A 2-W crossover with an Attenuator for
-6, -9, -12 dB and OFF settings offers -3, -6, -9, -12 dB and OFF settings offers
precise HF driver control precise HF driver control
• The high current Speakon™/1/4-inch • The high current Speakon™/1/4-inch
connectors ensure every watt gets to the connectors ensure every watt gets to the
drivers without ever being intermittent drivers without ever being intermittent
• The extra Speaker™ connector on the back • The extra Speaker™ connector on the
of the BX500 head allows you to add a back of the BX500 head allows you to add
sub-woofer or other drivers to get a full BR510N a sub-woofer or other drivers to get a full
BR515N 500w at either 2 or 4 ohms 500w, Dual NEO 10” drivers & Titanium HF 500w at either 2 or 4 ohms.
500w, NEO 15” driver and Titanium HF driver
• Size: 52cm W x 47cm D x 60cm H, WT: 18 kgs driver • Size: 52cm W x 47cm D x 60cm H,
Size: 52cmW x 47cmD x 60cmH WT: 18kg s. Size: 52cmW x 47cmD x 60cmH WT: 22kg
• Made in the USA. WT: 21kgs
• Optional FS22 footswitch for mute & 9 • Made in the USA. For more information,
band EQ go to carvin.com/BR510
OPTIONAL • Optional CV615 vinyl cover • Optional FS22 footswitch for mute & 9
COLORS OPTIONAL band EQ
12AX7 SEE CARVINWORLD.COM FOR ALL COLORS 12AX7 COLORS • Optional CV615 vinyl cover
PREAMP TUBE PREAMP TUBE SEE CARVINWORLD.COM FOR ALL COLORS
Titanium HF driver adds a new Titanium HF driver adds a new
dimension in high frequency dimension in high frequency
articulation articulation
38
38 carvinworld.com carvinworld.com 39
39
6. BX1500 BASS AMPLIFICATION NEW!
BX1500
• 1500w RMS, bridgeable
• Dual Power Amps - Biamping
• Warm 12AX7 Tube
• 3 Parametric EQs, 9-band EQ
• Ultra Light 4.5kgs
Optional SV2 2U rack mount case.
12AX7 Optional FS22 foot-
PREAMP
TUBE switch for mute &
effects loop
A Tube Driven 2U ultra-light 10Lbs bass head that delivers 1500w RMS
The BX1500 dual mono block rack mount bass head de- flat mid response to a heavy scooped mid response Passive switch to tailor the input for different pickup at 100,000 Hz delivering maximum efficiency while
livers huge power that’s rich and warm all generated from for slap bass players, the 3 mid sweeps with Bass and configurations, plus Graphic EQ, Effects and X-over reducing weight.
discrete Class A preamps and 12AX7 tube driven power Treble precisely dial in your exact needs, and the 9 front panel switches • The head runs cool from its 94% efficiency. There
amps. The comprehensive EQ is fun to work, shaping all band graphic is perfect for overall tone shaping – foot • The rear panel features an XLR Balanced DIRECT is no wasted heat or energy from the AC Wall plug
your tones to perfection. There is not a more powerfully switchable. No bass head has more tonal flexibility. output with Level control and pre or post switch. • Auto-switching AC input for 120V 60 Hz or 240V 50 Hz
featured, fabulous sounding bass head on the market, and • A one knob compressor adjusts for smooth light com • 3 High current Speakon™ ¼-inch combo speaker • Size: 2U rack mount 19”Wx10.5”Dx3.5”H 10 lbs
this one is an ultra-light 10 lbs. pression and the internal amp limiters hold everything. connectors are for Amp 1, 2 and Bridge • Made in the USA. For more information, go to
• 2 power amps deliver 300w at 8 ohm, 450w at 4 • Bi-Amping is easily done from the front panel • Rear panel Effect loop, stereo amp patch inserts carvin.com/BX1500
ohm, and 750w at 2 ohm each or 900w at 8 ohm crossover control with each amp setting it own and an un-muted turner jacks.
bridged or 1500w at 4 ohm bridged level for the HI and LO balance • The CLASS D power amps feature high current, high
• Rich, warm 12AX7 tube drives each power amp • Everything is nicely controlled with independent speed FET output devices for optimal 2 ohm current.
and features a rear In/Out switch Amp 1 & 2 Levels and a Master Volume • The high headroom reveals its high dynamic power
• 3 EQ sections, the Contour Control going from a • A conveniently located Mute switch and an Active/ from the Switchmode power supply that operates
BR SYSTEMS NEW! Colored Vinyl Enclosures BR CABINETS
The BR series cabinets incorporate very efficient Low Frequency drivers-
delivering accurate tone with high output. Expect a deep resonate bass from Precision 6 position HF High Powered
these systems along with a tight, punchy, slap & pop high-end with extended attenuator, Speakon™, 1/4”
connectors
Titanium HF
driver
mid range.
Shown with optional • Titanium HF driver for crisp-slap highs
ENCLOSURE ONLY SV2 Head Case • Premium 13- ply Poplar Hardwood
and with optional • Heavy internal bracing eliminates cabinet resonance
BR810 Hot White Bronco Vinyl • Dado joints are assembled with 3000 lbs tensile strength glue
• Eight heavy-duty 200w 10” • Caster sockets (except BR210 )
woofers • 18 gauge steel grill • Black vinyl covering, metal corners and recessed metal handles
• 1” Titanium HF driver
• Premium 13-Ply Poplar OPTIONAL
Hardwood COLORS
• Imp: 8Ω • Power handling: SEE CARVINWORLD.COM FOR ALL COLORS
1200wrms
• 6 position HF attenuator
• Casters Built-in
• Freq. Resp: 58 to 20K Hz -3dB
- useable to 38 Hz @ -10dB
NEW LIGHTWEIGHT NEO
• Sensitivity: 110dB @ 1w and NEW LIGHTWEIGHT NEO
141 dB @ 1200w
• 60cmW x 46cmD x 122cm H
WT 53kgs NEW LIGHTWEIGHT NEO
Shown in Navy Bronco Vinyl Shown in Hot White Vinyl
BR210N-8 BR115N-8
High Powered with Neodymium Drivers 8 ohms or BR210N-4 (4 ohms )
BR410N-8 with NEO Drivers - 8 ohms or BR115N-4 (4ohms)
with NEO Drivers 1200w- 8 ohms or BR410N-4 (4ohms) • Titanium 1” HF driver
Titanium HF driver • Two heavy-duty 200w 10” woofers, • 4 heavy-duty 200w 10” woofers, • Imp: 4 or 8Ω, power handling: 600 Watts
1” Titanium driver 1” Titanium driver • Speakon™ & 1/4” jack connector plate
• Imp: 8Ω, power handling: 400 Watts • Imp: 8Ω, power handling: • Freq. Resp: 35 to 20K Hz
• Precision crossover with 5 position 800 or 1600 Watts • Sensitivity: 99dB @ 1w and 127 dB @ 600w
HF attenuator • Precision crossover with 5 • Size: 60cmW x 46cmD x 64cm H, , WT 23 kgs
• Freq. Resp: 50 to 20K Hz position HF attenuator
OPTIONAL
• Sensitivity: 104dB @ 1w and 130 dB @ 400w • Freq. Resp: 40 to 20K Hz BR118N-8
• Size: 60cmW x 46cmD x 45cmH, WT 20kgs • Sensitivity: 107dB @ 1w and 136 dB @ 800w with NEO Drivers - 8 ohms or BR118N-4 (4ohms)
COLORS • BR410 Size: 60cmW x 46cmD x 64cm H, • Imp: 8Ω, power handling: 800 Watts
SEE CARVINWORLD.COM FOR ALL COLORS WT 30kgs • Speakon™ & 1/4” jack connector plate
• Freq. Resp: 30 to 2K Hz
• Sensitivity: 98dB @ 1w and 127 dB @
800w
• Size: 60cmW x 46cmD x 64cm H
40 carvinworld.com carvinworld.com WT 27 kgs 41 41