Contenu connexe
Plus de tutorialsruby (20)
wa-aj-flex-pdf
- 1. Integrating Flex into Ajax applications
Skill Level: Intermediate
Brice Mason (bmason@stegoworks.com)
Principal Technologist
Stegoworks LLC
15 Jul 2008
Traditional Asynchronous JavaScript + XML (Ajax) development continues to be the
leading method for producing rich Internet applications (RIAs). However, the
popularity of Adobe® Flex cannot be ignored. This article introduces the Adobe Flex
Ajax Bridge (FABridge), a code library that enables an easy and consistent method
for integrating Ajax and Flex content. By the end of this article, you'll be able to take
advantage of the rich features available through Adobe Flash assets.
Building Ajax applications has proven to be a consistent method for providing
engaging applications. However, the explosion in popularity of Adobe Flex cannot be
ignored. As we are continually pushed to create the best user experience, we're
often faced with the difficult task of integrating Flash-based assets embedded in our
Ajax applications. This article discusses the integration of Flash content with existing
Ajax content using the FABridge, a code library developed by Adobe to handle this
very task.
To be an Ajax developer today is pretty special. We're always at the front lines,
ready to greet users and offer the best first impression to the applications we build
for them. As Web standards advance and more vendors decide to implement them,
our jobs have become easier, allowing us to focus on the user experience. The
further advancements in JavaScript frameworks such as Ext JS, jQuery, and
Prototype have also allowed us to spend less time worrying about whether our code
will work across the platforms we're asked to support, leaving more time to innovate.
Although there are certainly more tools, techniques, and resources available to us
today, there is also a shift in development methodology that serves as a push toward
the rich world of Flash development. For many shops, the development workflow
would involve the user interface (UI) group to produce designs that support a
server-side-generated application. With just the JavaScript frameworks we have
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 1 of 15
- 2. developerWorks® ibm.com/developerWorks
now, we're pushed in the direction of application development for the client side.
However, the emergence of the Flex platform — a free, open source framework for
producing Flash applications — brings us further into the application development
arena. This type of innovation is good for us on the client side, but we must ensure
that we handle the process of integrating it with current architectures in a thoughtful
and careful manner.
Before I introduce code samples showing how to work with Ajax and Flex assets,
you need to understand the tools and skills required:
• I produced the Ajax samples in this article using the Ext JS JavaScript
library, so you need to download the .zip file that contains the library and
supporting documentation.
• Next, grab a copy of the free Adobe Flex 3 SDK and Adobe Flash Player
9 with debugging capability, if you don't already have it.
• Although not required to follow along in this article, you may also want to
check out at least a trial version of Adobe Flex Builder 3, an
Eclipse-based IDE that enables rapid Flex application development in
addition to superior debugging and profiling capabilities (see Resources).
• Finally, a working knowledge of PHP is helpful.
The integration issue
If you were looking forward to replacing all your Ajax content with Flex assets, your
task would be much simpler. However, this is an unlikely and often unreasonable
approach, because there are many reasons to preserve traditional Ajax functionality.
Fortunately, there's no reason you can't keep the best of both environments to
produce a rich, cohesive application.
There are quite a few simplistic methods for passing data to ActionScript code from
the Flash container (HTML/JavaScript code), including the use of query strings and
<param> tags. However, this method is limited to passing data into the container. A
more powerful technique is to use the ExternalInterface class, an application
program interface (API) used to broker communication between the ActionScript and
JavaScript languages. The use of ExternalInterface is best demonstrated by
the example in Listing 1:
Listing 1. ExternalInterface example
// ActionScript code
function exposed():String
{
return "Hello, JavaScript!";
}
Integrating Flex into Ajax applications
Page 2 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 3. ibm.com/developerWorks developerWorks®
ExternalInterface.addCallback( "getActionScript", exposed );
// HTML/JavaScript code
<script language="JavaScript">
var result = flashObject.getActionScript();
</script>
<object id="flashObject" ...>
<embed name="flashObject" ... />
</object>
Listing 1 demonstrates a stripped-down example of how to use the
ExternalInterface class to register an ActionScript function so that JavaScript
code can call it. You do this by first defining an ActionScript function, then using the
addCallback() method to expose the function to JavaScript for execution. On the
HTML side, simply obtain a handle to the Flash container and call the function,
which was named using the first parameter to the addCallback() method.
Although this demonstration concentrated on exposing functions to the JavaScript
code, you can just as easily go the other way by using the call() method of the
ExternalInterface class.
The ExternalInterface class can be quite powerful, but there are significant
drawbacks to implementing it. To use ExternalInterface, you must be able to
write code to implement both the ActionScript and JavaScript environments. This not
only requires added skill but double the effort. In this situation, maintaining code as
well as two very robust skill sets can become a challenge.
To address the limitations of development against the Flash external API, Adobe has
released the FABridge. The FABridge, which ships with the Flex SDK, is a small
library used to expose Flash content to scripting in the browser and works in most
major browser platforms. With the FABridge, plumbing code that was required to
directly implement the Flash external API is now virtually eliminated. Further, the
skills required to implement the bridge aren't as robust. As a JavaScript developer,
you simply need to be able to understand what's available to you in the way of
ActionScript properties and methods. Let's get started with a few examples that
demonstrate the capabilities of the FABridge.
An FABridge tutorial
Before you get started using the FABridge, here are the materials and development
environment you'll be working with. After downloading the latest Flex SDK, configure
the directory structure shown in Listing 2:
Listing 2. Directory structure for the FABridge tutorial
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 3 of 15
- 4. developerWorks® ibm.com/developerWorks
/
+--- bridge
| +--- fabridge.js
| +--- fabridge.as
|
+--- index.html
The directory structure is straightforward: You just have an index page and the
FABridge scripts hooked into their own directory named bridge. The location of the
FABridge library files depends on your environment. Because I'm using Flex Builder
3 Professional on Mac OS X, my library files reside in
install_root/sdks/frameworks/3.0.0/javascript/fabridge/.
Now that you have the appropriate architecture in place, you can begin creating the
skeletons on both the HTML/JavaScript and ActionScript sides. Use the code from
Listing 3 to develop the HTML/JavaScript skeleton:
Listing 3. HTML/JavaScript skeleton
<html>
<head>
<title>FABridge Tutorial</title>
<script type="text/javascript" src="bridge/FABridge.js"></script>
<script type="text/javascript">
// ...
</script>
</head>
<body>
</body>
</html>
As you can see, you simply hook the FABridge JavaScript library to your code, and
all the functionality of the bridge is immediately available. Next, use the code from
Listing 4 to implement the bridge on the ActionScript side:
Listing 4. Application skeleton
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:bridge="bridge.*"
layout="absolute"
width="300"
height="142">
<bridge:FABridge bridgeName="flex" />
<mx:TextInput x="70" y="54" id="txt_test" text="FABridge rocks!"/>
</mx:Application>
This code might be a bit more unfamiliar to you. The UI is kept clean and simple by
defining a single text input control with the ID txt_test and a default value of
Integrating Flex into Ajax applications
Page 4 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 5. ibm.com/developerWorks developerWorks®
FABridge rocks! The bridge namespace is defined, and all classes in the bridge
directory are imported. Finally, the Flex application is given a name for the bridge to
use to access it: flex. To compile this Flex code into a working SWF document, use
the mxmlc utility from the Flex 3 SDK. The most basic compile command is shown in
Listing 5:
Listing 5. Compiling MXML
path_to_flex_bin_folder/mxmlc path_to_mxml file
The command in Listing 5 compiles the source file and outputs an SWF file with the
same file name as the MXML in the same directory. Assuming a successful
compilation, you can now hook the resulting SWF into your HTML file, as shown in
Listing 6:
Listing 6. Linking the resulting SWF file
<embed src=”main.swf” />
Note: The code in Listing 6 is deliberately light to keep focus on the task of
demonstrating the FABridge. Unless you're targeting a specific environment (Listing
6 is targeting Mozilla), you'll want to add more intelligence in the way of object tags
and other load scripts.
Assuming that all went well, your application should now look similar to Figure 1:
Figure 1. The sample application
Now that you have successfully compiled and linked the Flex application into the
HTML container, invoke your first FABridge functions to obtain a reference to the
Flex application. Use the code in Listing 7 to fill in the empty <script> tag in your
HTML skeleton file:
Listing 7. Obtaining a reference to the Flex application
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 5 of 15
- 6. developerWorks® ibm.com/developerWorks
// global variable, holds reference to the Flex application
var flexApp;
var initCallback = function() {
flexApp = FABridge.flex.root();
return;
}
// register the callback to load reference to the Flex app
FABridge.addInitializationCallback( "flex", initCallback );
The code in Listing 7 starts by defining a global JavaScript variable that will hold a
reference to the Flex application when the FABridge obtains it. A callback function is
defined that sets the global variable and is invoked through the
addInitializationCallback() FABridge method. Using this code is simply a
matter of matching the name of the bridge that you configured in the Flex
application. From here, you're able to access all sorts of ActionScript functionality
from the JavaScript code.
Working with ActionScript objects
Now that you've obtained a global reference to the Flex application, you can access
ActionScript objects through the consistent interface that the FABridge provides. In
the ActionScript world, you would typically access objects through dot notation
object.id. Rather than expose ActionScript objects in dot notation, however, the
FABridge makes these objects available through function calls. It is a little different
at first, but all you need to know is the template to follow. An object traditionally
identified in ActionScript as object.id would now be accessed as
object.getId(). This is best demonstrated through example: Type the code from
Listing 8 into your HTML skeleton to try it out:
Listing 8. Getting ActionScript objects by ID
// get the text input control
var txt = flexApp.getTxt_test();
The variable txt is an object that represents the text input control with the ID
txt_test from the Flex application. You can see the template you would need to
follow for gaining access to other ActionScript objects by ID. The declaration begins
with the global reference to the Flex application, then a method call that always
begins with the string get followed by the ID of the target object. Notice that the
name of the ID must begin with a capital letter in this declaration.
Getting and setting the properties of ActionScript objects is similar to the process
just used. Keeping up with our example of manipulating the text input control, use
the code from Listing 9 to get and set the text property:
Listing 9. Get and set ActionScript properties
Integrating Flex into Ajax applications
Page 6 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 7. ibm.com/developerWorks developerWorks®
alert( "old: " + txt.getText() );
txt.setText( "Reset!" );
alert( "new: " + txt.getText() );
The code in Listing 9 first alerts the original value of the text input control from the
Flex application. By following the template described earlier, you can see that the
text property is obtained through a function call, with the get string prepended and
the property name camel cased. The set() method uses the same process but
accepts a parameter used to configure the new value of the object. After the code in
Listing 9 executes, you should see a screen similar to Figure 2:
Figure 2. Setting ActionScript object properties
Now, let's move on to the easiest manipulation of all: calling ActionScript object
methods. This process requires no special considerations on your part. ActionScript
object methods are used in JavaScript code just as they would be used in
ActionScript code. The code in Listing 10 demonstrates the invocation of a method
on your text input control:
Listing 10. Invoking ActionScript methods
txt.setVisible( false );
The code in Listing 10 sets the text input control in the Flex application to be
invisible. The object can still be referenced and manipulated, it's just not physically
visible. Between the ActionScript and JavaScript worlds, this is no change in the way
the methods are invoked.
One of the more powerful features of the FABridge is the ability to pass functions
between JavaScript and ActionScript code. Check out the code in Listing 11, which
dynamically copies the value of the text input in Flex to a <div> on the
HTML/JavaScript side:
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 7 of 15
- 8. developerWorks® ibm.com/developerWorks
Listing 11. Passing functions
// define a function used as a callback to JavaScript
var txtCallback = function( event ) {
// get the object which fired the event
var swf_source = event.getTarget();
document.getElementById( "copy" ).innerHTML = swf_source.getText();
return;
}
txt.addEventListener( "change", txtCallback );
The code in Listing 11 is a JavaScript callback function that's fired each time the text
input control value from the Flex application changes. When the value changes, it is
copied to a <div> tag with the ID copy. This type of functionality can be very
powerful, especially when attempting any sort of integration work between Ajax and
Flex content. With both environments relying heavily on events, it's key to be able to
have them work together.
The last feature this article explores is exception handling. By default, when you use
try . . . catch blocks throughout your JavaScript code, you'll be able to at
least access an error code that you can then look up in the online reference for
ActionScript errors. This methodology certainly works, but during development, you
want access to as much information up front as possible. While using the FABridge,
you can get this information simply by installing Flash Player 9 with debugging. With
this feature installed, you have access to line numbers, file names, error types, and
stack traces. Use the code in Listing 12 to see an example:
Listing 12. Exception handling
try {
alert( flexApp.throwsAnError() );
}
catch( e ) {
var msg = "";
for( var i in e ) {
msg += i + " = " + e[i];
}
alert( msg );
}
An error is thrown from the code in Listing 12 because the method
throwsAnError() does not exist. The code from the catch block outputs an alert
that looks similar to Figure 3:
Figure 3. Exception data
Integrating Flex into Ajax applications
Page 8 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 9. ibm.com/developerWorks developerWorks®
As you can see, this data is far more useful than a single error code and less work to
troubleshoot. When you're working with complex integration issues between differing
technologies such as JavaScript and ActionScript, you'll appreciate this extra help.
Putting it all together
So far, this article has taken a tutorial-type approach to showing the capabilities of
the FABridge. Now it's time to use a real-world scenario to demonstrate its
usefulness. As indicated earlier, you want to integrate and use the best of both the
Ajax and Flex worlds. One of the components that really shines on the Flex side is
its charting capability. Although it's not a free library, it is worth the added cost if
you're looking to do some intense client-side application programming. The example
you'll work with here is a combination of a PHP service that serves dummy data
containing the number of messages received in certain categories for specific users.
The data from the PHP service is loaded into a grid control using the Ext JS
JavaScript framework, then the same data is pushed over the FABridge as a data
provider to a pie chart in Flex. Start by taking at look at the PHP service in Listing
13:
Listing 13. The PHP service
<?php
$users = array();
array_push( $users, "Paul" );
array_push( $users, "Nancy" );
array_push( $users, "Ned" );
array_push( $users, "Lucy" );
$email = array();
$email[ "email" ] = array();
$email[ "totalCount" ] = count( $users );
for( $i = 0; $i < count( $users ); $i++ ) {
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 9 of 15
- 10. developerWorks® ibm.com/developerWorks
$tmp = array();
$tmp[ "user" ] = $users[$i];
$tmp[ "friends" ] = rand( 0, 100 );
$tmp[ "family" ] = rand( 0, 100 );
$tmp[ "spam" ] = rand( 0, 100 );
array_push( $email[ "email" ], $tmp );
}
echo json_encode( $email );
?>
Note: The data in this service is hard coded and only meant to demonstrate the
concept.
Next, take a look at Listing 14, which is the MXML to generate the pie chart:
Listing 14. Flex pie chart
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:bridge="bridge.*"
width="600"
height="800">
<bridge:FABridge bridgeName="flex" />
<mx:Script>
<![CDATA[
[Bindable]
public var email:Object;
private function displaySpam( data:Object,
field:String,
index:Number,
percentValue:Number ):String {
var temp:String= (" " + percentValue).substr(0,6);
return data.user + ": " + 'n' + "Total Spam: " + data.spam + 'n' + temp + "%";
}
]]>
</mx:Script>
<mx:Panel title="Spam E-mail">
<mx:PieChart id="chart"
height="100%"
width="100%"
paddingRight="5"
paddingLeft="5"
showDataTips="true"
dataProvider="{email}">
<mx:series>
<mx:PieSeries nameField="user"
labelPosition="callout"
field="spam"
labelFunction="displaySpam">
</mx:PieSeries>
</mx:series>
</mx:PieChart>
<mx:Legend dataProvider="{chart}"/>
</mx:Panel>
</mx:Application>
This code was taken from the Adobe documentation and modified to fit the scenario
Integrating Flex into Ajax applications
Page 10 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 11. ibm.com/developerWorks developerWorks®
as well as configured for use with the FABridge. One thing to note here is that the
variable named email is bindable, which means that any references to this data set
will be updated automatically. This works great, because you'll be sending data over
the bridge to this same variable, which is then used as the data provider to the pie
chart.
The last piece to this puzzle is the JavaScript code in Listing 15:
Listing 15. Produce the grid, populate the chart
<link rel="Stylesheet"
type="text/css"
href="../global/ext-2.0.2/resources/css/ext-all.css" />
<script type="text/javascript" src="bridge/FABridge.js"></script>
<script type="text/javascript" src="../global/ext-2.0.2/adapter/ext/ext-base.js"></script>
<script type="text/javascript" src="../global/ext-2.0.2/ext-all-debug.js"></script>
<script type="text/javascript">
Ext.onReady( function() {
// global variable, holds reference to the Flex application
var flexApp;
var initCallback = function() {
flexApp = FABridge.flex.root();
// load the data store, grid, populate the pie chart from JavaScript
initUI();
return;
}
// register the callback to load reference to the Flex app
FABridge.addInitializationCallback( "flex", initCallback );
function initUI() {
// create a data store using the PHP service
var ds_email = new Ext.data.JsonStore(
{
url: "service.php",
root: "email",
fields: [ "user", "family", "friends", "spam" ]
}
);
// when the data store loads, update the pie chart
ds_email.load(
{
callback: function( r, o, s ) {
// send an array of objects over the bridge to fill in the pie chart
var arr_email = new Array();
for( var i = 0; i < r.length; i++ ) {
var tmp = new Object();
tmp.user = r[i].data.user;
tmp.family = r[i].data.family;
tmp.friends = r[i].data.friends;
tmp.spam = r[i].data.spam;
arr_email.push( tmp );
}
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 11 of 15
- 12. developerWorks® ibm.com/developerWorks
flexApp.setEmail( arr_email );
}
}
);
// create a populate the grid.
var grid_email = new Ext.grid.GridPanel(
{
title: "E-mail Count",
store: ds_email,
columns: [
{ header: "User", dataIndex: "user" },
{ header: "Family", dataIndex: "family" },
{ header: "Friends", dataIndex: "friends" },
{ header: "Spam", dataIndex: "spam" }
],
height: 300,
width: 450,
renderTo: "grid-email"
}
);
}
} );
</script>
The first thing to notice about this code are the links to the Ext JS resources needed
to make it work. After hooking in the default styles and debug scripts for Ext, an
onReady block is configured. This block is executed only after a full Document
Object Model (DOM) is ready. You should be familiar with the code used to populate
the global flexApp variable with a reference to the Flex application. One addition to
the callback is the execution of the initUI function. This function is used to create
an Ext data store using the PHP service and to populate an Ext grid control using
the resulting data in the store. When the Ext data store is loaded, a data structure is
created and pushed over the FABridge so that the data binds as a data provider to
the pie chart. The final product is shown in Figure 4:
Figure 4. The final product
Integrating Flex into Ajax applications
Page 12 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 13. ibm.com/developerWorks developerWorks®
As you scan the data in the grid, it should match up with what's represented in the
pie chart. This really is a powerful concept, and you can see the possibilities it has to
offer.
Although this was a single real-world example of how you might want to implement
the FABridge, there are several other popular ways to use this library. Syncing
security information for remote service authentication and techniques to consistently
brand and personalize applications are just a couple of examples of how best to use
the bridge.
Conclusion
Adobe Flex is an incredible technology that is just starting to reveal its true potential.
However, no single product will solve all the wants and needs of developers and
users, so it's important that we keep our minds open and explore the possibilities of
integration using the FABridge.
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 13 of 15
- 14. developerWorks® ibm.com/developerWorks
Resources
Learn
• Adobe Flex Resources: See a collection of documentation for Adobe Flex.
• Ext JS Resources: Find documentation and tutorials for the Ext JS JavaScript
framework.
• Mastering Ajax: Read the developerWorks series for a comprehensive overview
of Ajax.
• Technology bookstore: Browse for books on these and other technical topics.
• IBM technical events and webcasts: Stay current with developerWorks'
Technical events and webcasts.
• developerWorks Open source zone: Visit the developerWorks Open source
zone for extensive how-to information, tools, and project updates to help you
develop with open source technologies and use them with IBM's products.
Get products and technologies
• Adobe Flex: Visit the Flex product page.
• Ext JS: Download the Ext JS JavaScript framework.
Discuss
• Flex discussion forum: Join the Flex discussion.
• Ext JS discussion forum: Join the Ext discussion.
• developerWorks blogs: Participate in developerWorks blogs and get involved in
the developerWorks community.
About the author
Brice Mason
Brice Mason is a husband and father from Albany, New York. He is also a developer,
writer, and speaker who frequently starts sentences with "Wouldn't it be cool if . . . ."
When not spending time with his family, he can be found writing code and writing
about code.
Trademarks
Integrating Flex into Ajax applications
Page 14 of 15 © Copyright IBM Corporation 1994, 2008. All rights reserved.
- 15. ibm.com/developerWorks developerWorks®
Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States,
and/or other countries.
Integrating Flex into Ajax applications
© Copyright IBM Corporation 1994, 2008. All rights reserved. Page 15 of 15