1. Seidenader XS-2 - www.equipnet.com/listid_346797/:
YOM 2009 - Sparingly used for 200 Hours only - Available for immediate disposal.
The control cabinet is directly connected with the machine. The operator panel for machine operation is
mounted at the XS-2 machine. The inspection data and the imajes of each camera will be shown on the
TFT- monitor. Industrial PC of B & R is used.
A PLC controls the machine functions and the communications with the operator interface.
The design of the machine complies with current guidelines ,OSHA regulations and CE requirements. The
electrical standard is EN 60204-1.
A prerequisite for reproductible inspection results in high precise mechanical handling which can present
object to cameras and lights over the course of many years of production. To Seidenader ,GMP
conformity,good access and long maintenance intervals are equally important.
An example for this is the Seidenader column concept. All product contact parts are mounted on colums
above a central machine platform,clearly seperating the drive section of the machine from the product
transport. Quick line clearance , short cleaning times and minimum cross contamination risk are the
results of this design.
In slower and mid size machines rotation and brake units are mounted on
movable modules and can be adjusted automatically for each product. Motors
and belts are fully covered and located underneath the machine table.
The cameras are completely enclosed and protected against mechanical
damage and dust .
The entire camera module can be dismantled easily for maintenance purpose.
A Patented mirror system is following the movement of the container –no camera
movement-no stress on connections, cables and the camera itself.

4. 2 Cameras in each Station.