Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.
Question 4 – How Did You Use
New Media Technologies In The
Construction And Research,
Planning And Evaluation Stages?
By A...
Shoot first attempt
We used the burst function on the Canon 700D at various fps along with
varying levels artificial light...
Shoot second attempt
We used the same camera without the burst shot function and instead chose
to photograph an arm with d...
Editing The Image
After choosing the image to use, we manipulated it’s angle to make the
syringe larger and assimilated a ...
Editing The Image
Using the clone stamp tool again we
had to keep re selectin the colour
we wished to clone due to the
cha...
Editing The Image
With the arm hairs on this corner, we used the content aware tool to
select a section of the arm and dra...
Editing The Image
The camera RAW filter allowed us to adjust the
image temperature. We turned this to blue
creating a cold...
Editing The Image
The radial filter allowed amendments to
be made inside a selection. This ensured
we could brighten the c...
Editing The Image
Inside the camera RAW
filter we could the mid
tones and therefore
‘clarity’ in the image. This
added mor...
Editing the image
The slogan and title were added by using the rectangular box tool to create a
conventional block backgro...
Editing The Image
We used the blending option called
‘divide’ to remove the white
background of the downloaded
channel 4 l...
Prochain SlideShare
Chargement dans…5
×

Evaluation Question 4 - Print Advert

97 vues

Publié le

Evaluation Question 4 - Print Advert

Publié dans : Formation
  • Soyez le premier à commenter

  • Soyez le premier à aimer ceci

Evaluation Question 4 - Print Advert

  1. 1. Question 4 – How Did You Use New Media Technologies In The Construction And Research, Planning And Evaluation Stages? By Adam Wareing
  2. 2. Shoot first attempt We used the burst function on the Canon 700D at various fps along with varying levels artificial light to capture sweets falling in front of a grey screen. The results proved to be average due to the poor lighting and then, after creating the above contact sheets, we chose to re-think the idea for our focal image.
  3. 3. Shoot second attempt We used the same camera without the burst shot function and instead chose to photograph an arm with direct exposure of artificial lighting (without filter). These results were more impressive when adjusting the light exposure settings and improving focus on the syringe itself. To get our final image (left) we experimented with different light exposure and angles as seen on these slides.
  4. 4. Editing The Image After choosing the image to use, we manipulated it’s angle to make the syringe larger and assimilated a section of the grey background using the stamp tool. Ctrl + T allowed us to resize the image to fit the frame, although corners were not filling We used the clone stamp tool by selecting which colour you wish to use then left clicking to paint that colour over the white area to assimilate it.
  5. 5. Editing The Image Using the clone stamp tool again we had to keep re selectin the colour we wished to clone due to the change in light gradient caused by the artificial light.
  6. 6. Editing The Image With the arm hairs on this corner, we used the content aware tool to select a section of the arm and drag it over the black space. This then digitally synthesised the image to seem as the continuation of the shot.
  7. 7. Editing The Image The camera RAW filter allowed us to adjust the image temperature. We turned this to blue creating a cold, dirty feel while turning up contrast to create more dramatic shadows.
  8. 8. Editing The Image The radial filter allowed amendments to be made inside a selection. This ensured we could brighten the contents of the syringe and draw more focus to it.
  9. 9. Editing The Image Inside the camera RAW filter we could the mid tones and therefore ‘clarity’ in the image. This added more dramatic affect to the image, giving it the connotations of addiction.
  10. 10. Editing the image The slogan and title were added by using the rectangular box tool to create a conventional block background to the text. The text tool was then used to type the slogan, title and website. To remain conventional, the font used was Trebuchet, which looked the closest to channel 4’s own font as that was unavailable.
  11. 11. Editing The Image We used the blending option called ‘divide’ to remove the white background of the downloaded channel 4 logo.

×