1. AITIS ADVANCE INSPECTION SERVICES
IN SAUDI ARABIA & GULF
Guided Wave or Long Range
Ultrasonic Testing
Long Range (Guided Waves) Ultrasonic Testing Introduction
and Services by Abdallah I. Al Tamimi Industrial Services Est.
*2012*
Abdallah I. Al Tamimi Industrial Services
Establishment
Testing and Inspection Works – ISO 9001:2008 Certified
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369
FAX: 038640396, Site: www.tamimiservices.com, e-mail: sales@tamimiservices.com
2. AITIS ADVANCE INSPECTION SERVICES
IN SAUDI ARABIA & GULF
Long Range Ultrasonic Testing (LRUT)
Low frequency ultrasonic waves are used to
detect defects and flaws. A set of piezoelectric
transducers transmit the ultrasonic waves in
both directions along the length of the pipe. The
same transducers detect the return signals and
analyze by calibrated system software.
The use of LRUT is the detection of corrosion,
erosion, metal wall loss and other defects in
pipes.
LRUT is suitable for inspection of pipes that are
covered with insulation (wool), under roads or
are buried; a large length of pipe can be
inspected by uncovering a small portion of pipe
(About 1 meter) at a single one location and
inspect pipe 40 meters both the sides.
Scope:
Guided Wave Systems detect pipe wall
thickness changes which generate Reflective
acoustic waves. These sound waves sweep the
entire thickness of the Pipe, the pipe acting as a
wave guide - where the term guided waves
originated. Guided Wave Systems is sorting or
screening NDT tool will classify pipe in
Categories of wall loss levels. Typically guided
waves provide 100% initial pipe wall screening
coverage. At every change in pipe cross-section
thickness a detectable screen indication is noted.
Typical reflectors are pipe bends circumferential
welds, pipe tees, reducers, pipe supports,
Corrosion of pipe Surface internally or
externally.
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369
FAX: 038640396, Site: www.tamimiservices.com, e-mail: sales@tamimiservices.com
3. AITIS ADVANCE INSPECTION SERVICES
IN SAUDI ARABIA & GULF
Applications:
No need to remove Paint from pipe. Fast
screening tool.
Mineral wool insulated lines, only one
meter to be removed for the rings.
Road crossings.
Bund wall penetrations.
Buried pipelines.
High temperature lines (<+125°C).
Sleeves sections.
Clearance needed between pipes is 65mm.
Size: Standard diameter sizes from 2 to 48
inches can be inspected.
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369
FAX: 038640396, Site: www.tamimiservices.com, e-mail: sales@tamimiservices.com
4. AITIS ADVANCE INSPECTION SERVICES
IN SAUDI ARABIA & GULF
Location Map:
Contact us:
Dhib Al Subaii Dia Awad
Executive Manager Training Manager
Mobile: +966 505 824 942 Mobile: +966 549 535 714
Email: dhib@tamimiservices.com Email: sirelkhatim@tamimiservices.com
Sultan Al harthi Gopikrishnan.T
Operation Manager Business Development Engineer
Mobile: +966 502 572 227, +966 557 587 772 Mobile: +966 500 566 806
Email: sultan@tamimiservices.com Email: gopikrishnan@tamimiservices.com
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369
FAX: 038640396, Site: www.tamimiservices.com, e-mail: sales@tamimiservices.com