Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories.

1. Magnetostrictive Level Transmitter
Model: ILT-6000 (Patented)
ILT-6000
Direct Insertion for Tanks or Vessels
9 7 1 5 D e r r i n g t o n R o a d H o u s t o n , T X 7 7 0 6 4 P: 281.469.6969 F: 281.469.0422 TF: 800.223.8469
w w w . J o g l e r . c o m s a l e s @ J o g l e r . c o m
LLC
Jogler’s ILT-6000 series level transmitter is the latest in magnetostrictive
level sensing technology designed for direct tank insertion. The ILT-6000
the process environment and protects it from excessive process conditions.
interruption or exposure to the process environment. The isolation well and
Titanium, Hastelloy, PP or PVDF.
Description
The ILT-6000 operates based on the magnetostrictive principle. The
• 24 VDC nominal, two wire, loop powered
• LCD display in 4-20 mA, in, cm and/or percent
•
• Local programmability allows for easy parameter changes
• Quick-Cal function for simple recalibration to any span
• Non-wetted 316 SS waveguide & sensor
•
• Accuracy of 0.01% of total span from enhanced sensitivity
• State of the art sensor and transmitter electronics
• Connection sizes from 2.00 to 6.00 inches
• Maximum transmitter length of 20 feet
• Full Vacuum to 725 PSIG @ 100 F. (ANSI/ASME 300 lb)
• Explosion proof housing, NEMA Type 4X
• Class I, Division 1, Groups B, C, D
• Class II, Division 1, Groups E, F, G, Class III
Technology
Standard Features
float assembly. The waveguide sleeve isolates the internal waveguide from
This provides an additional safety barrier for the operator. The major benefit
is the transmitter and waveguide can be removed for field checking without
float are available in a variety of materials including 316 SS, CPVC, Alloy 20,
transmitter sends fixed interval current pulses (start pulse) down the length
of the sensing wire, creating an electromagnetic field. When this electromagnetic
field is interrupted by the magnetic field of the float, magnetostriction occurs.
A constant-velocity torsional stress wave propogates along the length of the
sensing wire from the position of the magnetic float. The piezoceramic sensing
element converts the torsional stress to an electrical pulse (end pulse). The
transmitter electronics measures the time interval between start and end
pulses and uses this time to calculate the float position.
HART protocol field communication
All welded isolation well and float assembly, material variable
contains a low provile waveguide that is inserted into an isolation well and
Model ILT-6000 (Patented)
Magnetostrictive Level Transmitter
Direct Insertion for Tanks or Vessels
6646 Complex Drive | Baton Rouge, LA 70809 | Phone: 225-456-2495 | Toll Free: 1-800-223-8469
inquiries@jogler.com | www.jogler.com

2. 6646 Complex Drive | Baton Rouge, LA 70809 | Phone: 225-456-2495 | Toll Free: 1-800-223-8469
inquiries@jogler.com | www.jogler.com
Magnetostrictive Level Transmitter
Model: ILT-6000 (Patented)
ILT-6000
9 7 1 5 D e r r i n g t o n R o a d H o u s t o n , T X 7 7 0 6 4 P: 281.469.6969 F: 281.469.0422 TF: 800.223.8469
w w w . J o g l e r . c o m s a l e s @ J o g l e r . c o m
LLC
0-100%
ML
MeasurementLength3"
0-100%
Bypass Chamber & Transmitter Combination
Performance
Ordering Information
Model Number: ILT-6000-Probe Length (inches or mm)
• Accuracy +/- 0.015 inches (+/- 0.01%)
• Repeatability 0.001% of full span
• Linearity 0.020% of full span
• Refresh Rate 10x per second
• Initiation 0.00 seconds
• Minimum Density 0.37 gm/cm³
• Damping 0.00 to 1.00 @ 0.01 sec.
1.00 to 25.0 @ 1.00 sec.
• Upper Unmeasurable Length: 3.00 inch
• Lower Unmeasurable Length: 3.00 inch
• Input 12-30 VDC (24 VDC nominal)
• Output 4-20 mA, percent, and/or height
• Resistance 600 Ohms (max) @ 24 VDC
• Power 0.66 watts (30VDC x 0.022 amps)
• Error Signal 3.60 mA (low) or 22.0 mA (high)
• Interface 3 button keypad
• Software HART or PACT
• Display 2 line, 8 character LCD
• Connection 0.75 inch FNPT (Conduit)
Electrical
• MAWP @ MAWT 515 PSIG @ 400° F. (ANSI 300)
• Ambient Temp: -40° to +160° F. (-40° to +71°C)
• Process Temp: -40° to +230° F. (-40° to +110°C); (Standard)
Options to 400° F (204° C)
• Area Rating: Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G; Class III
• Enclosure NEMA Type 4X
Ratings
LLC
LLC
Model ILT-6000 (Patented)
Magnetostrictive Level Transmitter
Bypass Chamber & Transmitter Combination