for Lab 4-1:Visual Objective for Lab 4-3:Configuring LLQ Queuing MechanismVisual Objective for Case Study 3-1: Selecting a Converged Network Strategy Visual Objective for Lab 4-1:Configuring NBAR

1. Optimizing Converged Cisco
Networks (ONT) v1.0
© 2006 Cisco Systems, Inc. All rights reserved. ONT v1.0—1

2. Course Lab Guide

3. ONT 1.0 Lab Topology

4. ONT 1.0 Lab IP Addressing

5. Visual Objective for Lab 2-1:
Setting Up and Initializing the ONT Lab

6. Visual Objective for Lab 2-2:
Placing and Examining VoIP Calls

7. Visual Objective for Case Study 3-1:
Selecting a Converged Network Strategy

8. Visual Objective for Lab 3-2: Introducing
MQC and the SDM QoS Wizard

9. Visual Objective for Lab 4-1:
Configuring NBAR

10. Visual Objective for Lab 4-2: Configuring
FIFO and WFQ Queuing Mechanisms

11. Visual Objective for Lab 4-3:
Configuring LLQ Queuing Mechanism

12. Visual Objective for Lab 4-4:
Configuring Class-Based Header Compression

13. Visual Objective for Lab 4-5:
Configuring LFI

14. Visual Objective for Lab 4-6:
Configuring QoS Preclassify

15. Visual Objective for Lab 5-1:
Configuring QoS with Cisco AutoQoS

16. Visual Objective for Lab 5-2: Using MQC to Tune
QoS Mechanisms Configured with Cisco AutoQoS

17. Visual Objective for Lab 5-3:
Troubleshooting Converged Networks

18. Visual Objective for Lab 6-1:
Setting Up the Wireless LAN Controller

19. Visual Objective for Lab 6-2: Configuring
Basic Security Using WPA-PSK

20. Visual Objective for Lab 6-3: Configuring Advanced
Security Using LEAP Server-Based Authentication

21. Visual Objective for Lab 6-4: Configuring
WCS for WLANs