1.
Tobee®
TH6/4D Slurry Pump
Technical Specifications
Tobee® Heavy Duty Slurry Pumps
The heavy duty TH slurry pump range is designed to perform continuous pumping of highly
abrasive/dense slurries in processes from hydrocyclone feed to regrind, flotation and
tailings in minerals processing plants as well as other industrial applications.
Design Features
• Bearing assembly – a large diameter shaft
with short overhang minimizes deflection and
contributes to long bearing life. Only four
through bolts are required to hold the cartridge
type housing in the frame.
Always do your best
Above: Metal Lined, Rubber Lined, Polyurethane
Lined, Ceramic Lined is available
• Ball mill discharge
• Bottom/fly ash, lime grinding
• Coal
• Coarse sand
• Coarse tailings
• Dredging
• FGD
• Fine tailings
• Flotation
• Heavy media
• Minerals concentrate
• Mineral sands
• Ni acid slurry
• Oil sands
• Phosphoric acid
• Phosphate matrix
• Process chemical
• Pulp and paper
• Rod mill discharge
• SAG mill discharge
• Wet crushers
• Liners – easily replaceable liners are bolted,
not glued, to the casing for positive attachment
and ease of maintenance. Hard metal liners
are completely interchangeable with pressure
moulded elastomer.
• Elastomer seal rings back all liner joints.
• Casing – Casing halves of cast or ductile iron
with external reinforcing ribs provide high
operating pressure capabilities and an extra
measure of safety.
• Impeller – front and rear shrouds have pump
out vanes that reduce recirculation and seal
contamination. Hard metal and moulded
elastomer impellers are completely
interchangeable.
• Cast in impeller threads require no inserts or
nuts. High efficiency and high head designs are
also available.
• Throatbush – wear is reduced and
maintenance simplified by the use of tapered
mating faces to allow positive accurate
alignment during assembly and simple
removal.
• One-piece frame – a very robust one-piece
frame cradles the cartridge type bearing and
shaft assembly.
• An external impeller adjustment mechanism is
provided below the bearing housing for easy
adjustment of impeller clearance.
Executive Standards
•
•
Design Standard
Hydraulic Institute 6, ISO 9001, ISO 14001,
OHSAS 18001 & CE certified.
• Castings Dimensional Standard
ISO8062
• Performance Test Standard
ISO9906, ISO2548, ISO3555
• Vibration Standard
ISO2372
• Noise Standard
ISO3746
• Hydrostatic Test Standard
ANSI/HI 1.6-2000
Material Standard
AS 2027 Grade Cr27, ISO 21988 Grade Cr27,
ASTM A532 Grade III Type A

2.
• Impeller
2, 4, 5, 6 VCG
Closed or Open type
Standard, WRT1, BR, BF, HE1, HE2,
RE1, LPT1, SR, EP, etc.
• Bearing Assembly
D, DD, E, EE, XLM type.
• Shaft Sleeve
SS420, SS304, SS316, Ceramic.
• Materials
Metal, Rubber, Polyurethane, Ceramic.
• Expeller & Expeller Ring
Cast iron, High chrome, Stainless steel.
• Seal Arrangement
Gland seal, Expeller seal,
Mechanial seal.
• Bearings
ZWZ, NSK, SKF, Timken etc.
• Frame
D, E type.
• Packing
Asbestos, PTFE, Glass fibre, Carbon
fibre, Arimid Fibre, Latty 4777.
• Gland Assembly
Cast iron, Stainless steel.
Accessory Options
(available on request)
• Drive Arrangement
CV, ZV, CR, CL, DC type.
• Inlet & Outlet Flanges.
• Additional Customised Options.
Operating Curve
Options
Technical Data
Model TH6/4D
Capacity Q (m3/h) 162-360
Head H (m) 12-56
Speed n (rpm) 800-1550
Max Power (kw) 60
Max Particle Size (mm) 44
Max Eff. η (%) 65
Impeller Type 5 VCG Closed
Standard Material Configuration
Frame Plate & Cover Plate
Wetted Parts Hyperchrome
Shaft Sleeve 420C Stainless Steel
Shaft
Frame Ductile Iron
Bearing ZWZ
A3
3rd ANGLE PROJECTION U.N.O.
WORK IN PROGRESS
DRAWING STATUS
Drawing Number
MF249203 P0
REV
SHEET 1 OF 1
RF-420EX
SCALE
APPD
CHECK
DRAWN
DESIGN J.A
1 : 35 U.N.O.
02.02.16
18.05.17
A.R
- -
-
-
No.
00
-
-
-
-
- -
-
-
-
-
APPROVED FOR CONSTRUCTION
Description DATE
APPD
CHK
DWN
AS PER APPROVALS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- WELD CAT.
FINISH CODE
DO NOT SCALE
IF IN DOUBT - ASK
MASS: 13228.7 kg
MINE DEWATERING SOLUTIONS
15 Dacmar Road Coolum Beach, QLD 4573 Australia
Telephone: +617 5449 3000 Facsimile: +617 5446 4304
Email: multiflo@weirminerals.com Web: www.weirminerals.com
-
-
-
Copyright © Weir Minerals Australia Ltd. 2017
Weir Minerals Austalia Ltd. ("the Company") is the owner of the copyright and all confidential information in this drawing.
The drawing must not be copied in whole or in part, in any form or by any means, and the information in it must not be
disclosed to any person, or used for any purpose other than the specific purpose for which it has been provided,
without the prior written consent of the Company.
MULTIFLO
Mine Dewatering Solutions
HYDRAU-FLO
Safety Solutions for Liquid Filling
®
®
ASSEMBLY STEEL DISCHARGE
NOTE: FOR DRAWING, FABRICATION AND ASSEMBLY STANDARDS REFER TO
WEIR MINERALS MULTIFLO ENGINEERING DEPARTMENT STANDARDS AND PROCEDURES.
ASPIR
Coal Processing Solutions
®
Ductile Iron
1045 Carbon Steel
Seal Arrangement
Expeller Seal Mechanical Seal
Gland Seal
• Gasket & O-ring
NR, NBR, Viton, Neoprene, Butyl,
Hypalon, EPDM etc
• Electric Motor or Diesel Engine.
• VFD, Soft Starter etc