This document discusses vibrations in aviation, including the types, causes, effects, and importance of monitoring and mitigating vibrations. It covers engine-induced, structural, and aerodynamic vibrations and their impacts. Accidents caused by vibrations are examined, as well as effects on aircrew, ground crew, and emerging technologies to reduce vibrations. Continued research is needed to effectively mitigate vibrations and ensure safety in aviation applications.
2. Scope
• Introduction
• Types of Vibration
• Monitoring and Mitigating
• Aviation accidents due to Vibration
• Effects on aircrew and ground crew
• Emerging technologies and advancements
• Conclusion
3. Introduction
• Vibration impacts performance, safety, and comfort
• Types, Causes, and Effects on aircraft components
• Importance of monitoring and mitigating vibrations
• Importance of understanding vibrations
5. Engine-Induced Vibrations
Causes of engine-induced vibrations:
• Unbalanced rotating components
• Misaligned engine parts
• Engine malfunctions
Effects on aviation:
• Increased fatigue and stress on aircraft components
• Decreased performance and fuel efficiency
• Potential damage to engine and airframe
6. Structural Vibrations
Sources of structural vibrations:
• Turbulence
• Landing impacts
• Wing flutter
Effects on aviation:
• Fatigue and cracks in airframe structure
• Reduced passenger comfort
• Risk of structural failure
7. Aerodynamic Vibrations
Causes of aerodynamic vibrations:
• Wing-tip vortices
• Control surface movements
• Airflow disruptions
• Imbalance in component manufacturing – all not identical
Effects on aviation:
• Oscillations and vibrations in flight controls
• Impaired aircraft stability and control
• Increased pilot workload
8. Monitoring and Mitigating Vibrations
Vibration monitoring systems:
• Accelerometers and sensors
• Data analysis and feedback
Vibration reduction techniques:
• Balancing rotating components
• Structural modifications and reinforcements
• Improved aerodynamic designs
9. Accidents due to Vibration
Accident Cause Vibration connection
American Airlines
Flight 587 (2001)
-Response to wake turbulence
-Vertical stabilizer detached
-Due to high aerodynamic loads
Rudder inputs resulted in severe
aerodynamic vibrations, leading to
the structural failure of the vertical
stabilizer
Air France Flight
447 (2009)
-Temporary inconsistencies in
airspeed measurements
-Inappropriate flight control inputs
Aircraft encountered severe
turbulence during flight, which
could have caused vibrations in
flight controls, potentially
contributing to control input errors
made by crew
10. Accidents due to Vibration
Accident Cause
United Airlines Flight 232
(1989):
-Engine failure
-Loss of all 3 hydraulic systems
-Loss of aircraft control
China Airlines Flight 006
(1985)
-Wind shear associated with a microburst
-Uncontrolled descent
British European Airways
Flight 548 (1972):
-Detachment of left engine's fan assembly
-Fatigue failure of the rear engine mount
11. Accidents due to Vibration
Helicopter Accidents
Sikorsky S-92A - (2009): Cougar Helicopters Flight 491, The main rotor gearbox oil pressure-
related vibrations and subsequent failure resulted in the crash of the
helicopter off the coast of Newfoundland, Canada
- (2013): Bristow Helicopters Flight 225, Vibrations caused by a damaged
engine resulted in the forced landing and subsequent sinking of the
helicopter near Sumburgh, Scotland
Bell 206B
Helicopter
- (2016): The helicopter experienced excessive vibrations during flight,
leading to the separation of the main rotor blades and subsequent crash in
Arizona, United States
- (2014): Vibrations caused by a failure of the tail rotor assembly resulted in
the crash of the helicopter in Hawaii, United States
12. Accidents due to Vibration
Helicopter Accidents
Eurocopter
AS350
- (2008) Vibrations caused by the failure of the tail rotor resulted in the loss
of control and subsequent crash near Fox Glacier, New Zealand
- (2007): Vibrations caused by the separation of a rotor blade led to the crash
of the helicopter in Cornwall, United Kingdom
AgustaWestla
nd AW139
- (2016): Vibrations caused by a failure of the main rotor gearbox led to the
emergency landing and subsequent crash in Norway
- (2015): Excessive vibrations caused by a fractured main rotor gearbox
mount resulted in the emergency landing and subsequent crash in Scotland
13. HUMAN FACTOR OF VIBRATION
• Low frequency harmful to human body
• Vibrations of greater magnitude at freq <20
Hz
• Biological effects-
Motion sickness (<0.5 Hz)
Loss of orientation and coordination
Fatigue, discomfort and possible physical
damage
14. Effects on Aircrew
Effect Description
Fatigue and
Discomfort
- Vibrations can cause increased fatigue and discomfort for aircrew
members during prolonged flights
Occupational
Health Issues
- Long-term exposure to excessive vibrations can contribute to
musculoskeletal disorders, such as back pain, joint problems, and repetitive
strain injuries
Decreased Task
Performance
- Vibrations can affect aircrew members' fine motor skills and hand-eye
coordination, potentially impacting their ability to perform delicate tasks or
manipulate controls with precision.
- Increased vibrations in the cockpit may also cause difficulties in reading
instruments and displays accurately
15. Effects on Ground Crew
Effect Description
Whole-Body
Vibration
- Ground crew members working near aircraft or helicopters can be exposed
to whole-body vibrations from engines, rotors, and ground-based
equipment.
Hand-Arm
Vibration
- Ground crew members operating power tools or handling vibrating
equipment, such as hydraulic tools, may experience hand-arm vibration
syndrome
Noise-Induced
Vibration
Effects
- Vibrations are often accompanied by high noise levels, especially near
aircraft engines and during ground operations.
16. Emerging technologies & advancements
System Description
Active Vibration
Control Systems
Active vibration control systems use sensors to detect
vibrations and actuators to counteract them in real-time
Advanced
Materials and
Composites
Development and use of advanced materials and composites
with improved damping properties can help reduce
vibrations
Smart Structures
& Adaptive
Systems
Smart structures integrate sensors, actuators, and control
systems to actively adapt to changing conditions and mitigate
vibrations
17. Emerging technologies & advancements
System Description
Health and
Usage
Monitoring
Systems (HUMS)
- HUMS technology involves the use of sensors and data
analysis techniques to monitor the health and performance
of aircraft components
Improved Engine
Designs
- Engine manufacturers are continuously working on
developing more balanced and efficient engine designs
Computational
Modeling &
Simulation
- Computational modeling and simulation techniques allow
engineers to analyze and predict vibrations in aircraft
structures and components
18. Conclusion
• Recap of vibration types and their effects on aviation
• Emphasize the importance of managing vibrations for safety and
efficiency in aviation
• Technologies promise in mitigating vibrations in aviation
• Various stages of development, testing, or implementation
• Continued research, development, and rigorous testing are essential
• Effectiveness and safety in real-world aviation applications
• Mitigation measures - anti-vibration gloves, seat cushions, &
ergonomic equipment, can help alleviate the physical challenges
19. REFERENCES
• www.redbackaviation.com
• www.rotorandwing.com
• https://www.flightglobal.com
• https://www.boeing.com/commercial/aeromagazine/aer
o_16/vibration_story.html
• https://mtiinstruments.com/types-of-aircraft-vibrations/
• Handbook of noise and vibration control by Malcolm J
Crocker
• Aircraft accident reports