3. Beautiful parts at an amazing price
ProJet 1200 3D printer: US$4,900
• Includes everything needed, no extra equipment to buy
• UV curing station built in
Low per part cost
$0.50 per dental unit
$0.50 - $0.80 per ring
4. Tough plastic that’s castable
Use prints directly as casting patterns
Cement
Crown
Sprue
Mold
99.99% ash free burnout
9. Breakthrough economics
• From the printer itself to the easy to use material cartridges,
the ProJet 1200 is amazingly economical to use
• The printer, at $4,900, is inexpensive enough to buy and put
right on your desk
• Furthermore, part cost is exceptionally low – less than $1 for a
ring, and around $0.50 per dental unit
• VisiJet FTX Green material cartridges are just $49, and each
cartridge is enough for 50+ rings or 100 dental units
11. No additional consumables or parts that wear out
Material cartridges include
everything you need
Peel off top
Teflon coated print
window built in
12. 3D print right at your desk
•
•
•
•
Compact
Self-contained
Network ready
Factory calibrated
13. How it works – micro-SLA
Resin is in the bottom of the
build cartridge and the build
platform is lowered.
Build Platform
Build Cartridge
Mirror
Imager
Resin is cured by imager
through the window on the
print cartridge and onto the
build platform
14. How it works – micro-SLA
Repeat the process one 30
micron layer at a time until
part the precise part is
finished
Part
Imager
15. Hassle free materials
• 30 grams of material per cartridge
• 90 units for dental
• 50 – 100 Rings
• 30 connectors
• $49 per cartridge
15
16. Print Material– VisiJet™ FTX Green
VisiJet® FTX Green
Properties
Condition
Composition
Values
UV Curable Plastic
Color
Dark Green
Cartridge Quantity
30g
Density @ 80 °C (liquid)
1.02 g/cm3
Tensile Strength, MPa
ASTM D638
30
Tensile Modulus, Mpa
ASTM D638
1700
Elongation at Break, %
ASTM D638
10
Flexural Strength, Mpa
ASTM D638
40
Ash Content
Description
0.01%
Wax-up castable
17. ProJet 1200 Specifications
•
•
•
•
•
•
•
•
•
•
Build Area (xyz) : 43 mm x 27 mm x 180 mm
Resolution(xy): 587 effective dpi
Layer Thickness: 30 micron
Vertical build speed: 14mm/hour
Material: VisiJet FTX Green
Material Delivery: All-in-one cartridge with built-in print
window
Built-in UV Curing Station
File input: STL
Power: 100-220V 50/60 Hz
System size: 200 x 200 x 300mm
17
18. ProJet 1200 Summary
Small, precise parts and casting patterns with micro-SLA
quality at a breakthrough price
•
•
•
•
Economical to own
Safe to operate anywhere
Simple to use
Prints accurate ready-to-use parts and
castable patterns that cost less than
one U.S. dollar
19. ProJet 1200
For more information, visit 3dsystems.com
Thank You
Return to navigation
2014年2月28日
v11.22.13
Editor's Notes
3D Systems founder Chuck Hull invented Stereolithography (SLA, for Stereolithography apparatus) in 1983. It is the original 3D print technology, and to this day it remains unchallenged as the best print technology for precision and part qualityAs the superior 3D printing method, SLA printers have been at the high-end of the market, making them cost-prohibitivefor some applications3D Systems, with its unparalleled expertise in SLA, has applied its technical know-how to create the ProJet 1200, a micro-SLA printer that shatters the price/performance ratio for accurate, professional 3D printingThe ProJet 1200 is a professional 3D printer for your desktop. Parts made on the ProJet 1200 are accurate, have fine detail and are castable. It is ideal for dental wax-ups, jewelry and other castings, and the durable, stiff parts are also great for general plastic prototypes.
The ProJet 1200 makes printing small parts with intricate details radically more economical than ever beforeThe VisiJet FTX Green material, engineered specifically for this micro-SLA printer, even makes it possible to cast parts in metalWith this castability, 3D printing will further revolutionize the manufacture of prosthodontics, jewelry, and other small cast metal products.
The ProJet 1200 uses VisiJet FTX Green material, a specially engineered photopolymer that is ideal for casting99.99% ash free burnoutSupports serve dual purposes: they secure the part while printing and then act as sprues during castingStrong, rigid material that won’t deform during investment castingBeautiful dark green semi-clear plastic-like material
The ProJet 1200 is inexpensive enough to put on every workbenchLow per part cost of under $0.50 per dental unit mean that every pattern can be printedCycle times are incredibly fast – average print times are around one hourNo need to wait to fill up a large 3D printer with models before starting a print jobThe ProJet 1200 is small and works quickly, so you can print the patterns you need right awayPrint crowns, copings and bridgesLess expensive and more detailed than millingMilling generates a lot of waste
At less than $1 per ring in material cost, and fast print times, the ProJet 1200 makes 3D printing the first and best choice for jewelry productionWith a 43x 27 x 180 mm (1.7 x 1 x 7 in)build area, almost any jewelry pattern can be printedAt $4,900, every jeweler can afford to have a ProJet 1200 right at her workbench
Electronics, figurines, components for all sorts of things – virtually anything that is investment cast can have a pattern 3D printed in minutes or hours for immediate casting.
30 micron layers mean that parts are smooth and precise in Z585 effective dpi ensures exceptional XY accuracy and feature resolution
From the printer itself to the easy to use material cartridges, the ProJet 1200 is amazingly economical to useThe printer, at $4,900, is inexpensive enough to buy and put right on your deskFurthermore, part cost is exceptionally low – less than $1 for a ring, and around $0.50 per dental unitVisiJet FTX Green material cartridges are just $49, and each cartridge is enough for 50+ rings or 100 dental units
The ProJet 1200 is completely self-contained. There is no additional equipment to buy.UV curing hardens any unfinished material for safe handling and locks in mechanical properties Curing is done in a separate compartment within the printerYou can print parts while curing the last batch
Each VisiJet FTX cartridge includes a special Teflon-coated windowthat acts as the print surface. This is a wear item, but because it’s part of the material cartridge, it’s replaced every time you insert a new cartridge$49 cartridge includes the print window, so there are no other wear components to replaceEasy part removalBecause the print window is replaced with each cartridge, it is engineered with just the right amount of adhesion, making it easy to remove finished parts from the printer without risk of breakageThis has the added benefit of allowing for thinner supports, making support removal easier
From end to end, the ProJet 1200 is a fully integrated, clean and intuitive 3D printing solutionNo special post-processing equipment or environmental controls are neededEasy LAN-based printing means anyone can send a print directly to the ProJet 1200Factory calibrated – no routine calibration required
VisiJet FTX Green comes in self contained cartridgesJust peel the top off, stick it in the printer and you’re ready to printJust $49 per cartridgeMaterial highlightsThe ProJet 1200 uses VisiJet FTX Green, a specially engineered photopolymer that is ideal for casting99.99% ash free burnoutStrong, rigid material that won’t deform during investment castingBeautiful dark green semi-clear plastic-like material
