2. A PERFECT FINISH FOR YOUR TILED
FLOOR FINISHING
or movements absorption
F
MOVEMENT AND SCREED JOINTS
Avoids compression and cracking of hard floor
coverings in case of substrate movement.
NG
TOOLS FOR LAYI Different infill colours and heights available to
CERAM IC TILES match your tiled floors.
Protect floor coverings from cracks arising from
stresses in screeds and beds.
Don’t forget IPE (individual
protective equipment)
or decoration or protection of ceramic tiles edges
F
STOPPING PROFILES
Several materials to fit different types of
installations, several finishes to fit all decors.
Some models can be bent on site using the hand
bending machine.
LISTEL
For nice finish and transition between two
coverings.
Can be used on wall and floor.
Working pants reinforced at knees
level via watertight Cordura®
o ensure transition between two levels
T
TRANSITION PROFILES
"Hygrovet" knees pads For easy transition between two floorings which
have different thicknesses. Different models to
suit any type of use. Some of them can be bent on
site with our hand bending machine.
Protection glasses
ACCESS RAMP
For easy transition between two floorings which
have diffrent thicknesses. Ensure safety in walking
areas of malls.
Make wheeled traffic easy. Some models can be
bent in factory.
or safety and decoration of stair cases
F
STAIR NOSING PROFILE
They have smooth or ribbed surface or integrate an
anti slip insert in order to reduce risks of slipping.
Type of products in accordance with They further protect the step edge and floor covering.
accessibility standards in public buildings. Some can be used outdoor.
For additional information see our Dinatheque. Stair nosing profiles are classified according to their
sliding coefficient (R9 to R12).
www.dinac.fr | comexport@dinac.fr | Profiles for ceramic tiles
3. FLOORS AND WALLS
WALL FINISHING
or protection of angles
F
CORNER GUARD
INSTRUCTIONS FOR MAINTENANCE OF Designed for protection of inside and outside
PROFILES FOR CERAMIC TILES angles and compensate angles alignment defects.
For use in areas with intense transit.
For daily maintenance use classical
cleaning products.
Should you want to use a soda , ammoniac
or acid based product on anodized
profiles, we recommend to carry out a
ROUNDED EDGES
preliminary test. Designed to protect and decorate angles of tiled
Beware : once in contact with alkaline,
walls. Several colours and materials available.
calcic materials (plaster, cement)
anodization might be stained. It is
therefore advised to protect the profiles
until construction works are completed.
For brass use a product of “Miror” type.
Beware : it is not advised to put brass in or decoration or protection of ceramic tiles edges
F
contact with products such as as liquid
ammoniac, chlorine, citric acid, fruit
juices, silver salts, caustic soda, vinegar.
STOPPING
Several materials to fit different types of
installations, several finishes to fit all decors.
Some models can be bent on site using the hand
bending machine.
LISTEL
For nice finish and transition between two
coverings.
r
ur tools fo
p onents of o e!
Find all com iles in our Dinathequ
mic t
laying cera
4. Total solutions for bathrooms, kitchens, shopping malls, balconies, terraces…
WATER DRAINAGE
o avoid infiltrations
T
BALCONY PERIMETER PROFILES
For protection against water seeping from balcony,
façade, terrace. Protect paintings and avoids (or delays)
)
damaging of building components.
or water draining
F
SHOWER DRAINING SYSTEM
Allows water drainage in individual showers and THE SHOWER DRAINING SYSTEM
replaces shower cubicle.
It is made from stainless steel and suitable for
installation on resin or ceramic tiles floorings.
It includes : one gutter, one grid (to be laid or
embedded in tiles) and one water trap.
WATER TRAPS
Vertical or horizontal outlets,
different dimensions and materials
are available.
or access to pipe works
F
FRAMES AND INSPECTION COVER SETS
Different covers to suit different load capacities,
fully tight to smells.
or access to water traps
F
INSPECTION FLAP
Fits any type of bath tub and any ceramic tile
thickness. To be installed while tiling.
www.dinac.fr | comexport@dinac.fr | Profiles for ceramic tiles
5. WATER PROOFING
or waterproofing purposes
F
WATER PROOFING MAT ACCESSORIES WATERPROOFING MAT DINETANCH
INDOOR USE. Producttechnical building & constructionCSTB
(french
with technical agreement from
authority)
Prevents ingress of humidity, bacterias and other
agressive substances. Specially suitable for use on
horizontal and vertical covering in humid rooms. To
be fitted on new screeds and slabs together with
accessories from the DINETANCH range such as angle
parts, junction strips and waterproofing plates.
Inside and outside angle
DINETANCH AR 115 et AS 115 or waterproofing and uncoupling
F Ceramic Glue Waterproofing
purposes mat
UNCOUPLING MAT DINAMOUV
INDOOR USE.
Preshaped junction
strip
To be fitted on old or problematic substrates.
DINETANCH BJP 10 On concrete floors : prevents damaging movements.
On heating floors : uncouples most tensions created
by the heated slabs.
On industrial floors : acts as load and pressure
equalizer.
or draining off water ingresses
F
DRAINING MAT DINADRAIN
Fitting instructions for draining mat. OUTSIDE USE.
Allows free draining off of trickled water. Very
1à2%
resistant to compression, traction, shocks and
D
punching. Provides longer life time to your ceramic
C
tiles, avoids cracks and debonding of tiles.
B For terraces and balconies. To be fitted with angle
parts, junction strips and waterproofing plates.
Keep also in mind balcony perimeter profiles (see
A previous page).
Ceramic Glue Screed Draining
A : concrete slab C : draining mat mat
B : screed D : ceramic tiles
NG o avoid water seepage
T
TOOLS FOR LAYI
CERA MIC TILES
BATHTUB JOINT
Set of tighting joints fitters Stopping profile providing peripherical
and removers waterproofing of bath tubs.
To be installed when fitting wall covering. It includes
a soft lip which is pressing on the tub edge and a
rigid part which fits underneath the wall covering.
CORNER JOINT
Protects tiled floor/wall angles and bath tub against
dust and water seepage. To be installed when
fitting wall covering. Add a silicone joint to improve
Whole range of tools laying efficiency against water ingress.
ceramic tiles in our Dinatheque !
www.dinac.fr | comexport@dinac.fr | Profiles for ceramic tiles
6. CERAMIC TILES
PROFILES FOR
Head quarters
Production site
Logistic center
LYON
Professional department
NO
A 43
Z.I. des Marais - BP 29 CHAMBERY
38350 La Mure - France
Tel. +33 4 76 81 14 22 A 48 A 41
GRENOBLE
Fax +33 4 76 30 93 03
www.dinac.fr N 85
SORTIE N°8
National sales department : Gap
comfrance@dinac.fr Briançon
Vizille
Export department : Station de l'Oisans N 85
VIZILLE
comexport@dinac.fr A 51
Photographic credits : Dinac - Bernard Ronté - Shutterstock
SISTERON
DIY and trade department
N 85
Parc Industriel ouest
BRIANCON
65, rue de Chambourg - BP 2011
01117 Veyziat - France
Tel. +33 4 74 12 05 10 LA MURE
Fax +33 4 74 12 05 12
contact@dinac.fr
Reference : 90 86 48 - 10 / 09