1. DIPESH KUMAR
B-Tech in Electronics & Instrumentation Engineering
Project Engineer - Instrumentation
GE OIL & GAS Measurement & Control.
Address: A-25 Krupal Society-1
Manjhalpur
Vadodara – 390011, Gujarat, India
Mobile: (+91)- 7698228824
Email: dipesh.aeie@gmail.com
5+ Years of Experience in the field of Instrumentation Engineering in Engineering Design,
Construction, Commissioning Maintenance & EPC Projects in Petrochemicals and Textile Industry.
TECHNICAL SKILLS
 Prepare Loop Diagrams, Functional Logic Diagrams, Wiring Termination Diagrams, Installation
Hook-up Drawings, Typical Installation and fabrication drawings, Instrument location Plans,
Control Panel / Auxiliary Console layout Drawings, Control/Equipment Room Lay-outs, Cable
Tray/Trench Lay-outs, Cable route index, Cable Schedules and Cable Drum Schedules, JB
location layouts and schedules, Interconnection Schedules, Fire/Smoke Detection Lay-out, Bill
of material for bulks and Alarm / Trip schedules.
 Installation, Commissioning, Maintenance, Calibration and Loop checking of various field
instruments.
 Working experience in Engineering, Procurement and Construction (EPC).
 Basic Knowledge in SPI (SMART PLANT INTOOLS).
 Ability to manage, handle and supervise a team of skilled work force.
 Selection & Sizing of Thermowell, DP type Flow Meter, Control Valves ( MOV, ROV, SOV),
Relief Valves and Actuators.
 Review of control philosophy, P&ID diagrams, cause & effect diagrams, instruments list.
 Experience in Installation & Commissioning of Control Panels.
 Evaluating and defining the scope of project, project status review.
 Preparing project schedules/plans.
 Monitoring projects with respect to Cost, Resource Deployment, Time over-runs and Quality
Compliance to ensure timely execution of projects.
 Exposure to engineering surveys & documentation, Material take off (MTO) and as-built
drawings etc.
 Pre-commissioning & commissioning of JBs, Instrument Enclosure Installation, Impulse tubes,
Cable/Conduit Routing, Loop Checking, Hydro test, Enclosure ratings, Area classification and
Enclosures, terminations, equipment layout and Earthling.
 Versatile and capable with extensive Experience of Maintenance Management including
Inspection, Calibration and testing, Up-grading, Maintenance and fault diagnosis in Oil & Gas
and petrochemical plants.
 Good troubleshooting and problem solving skills.

2. EMPLOYMENT DETAILS
23-12-2014 to Present
Organization GE OIL & GAS Measurement & Control.
Designation Project Engineer - Instrumentation
Project 1 Terminal Automation System & Tank- Farm Management
System (ADANI HAZIRA)
Project 2 Jamnagar 3 Refinery Project.Terminal Automation System & Tank- Farm Management
System (HPCL , HASSAN)
Roles & Responsibilities
 Evaluation of Project.
 Preparation of the design basis document, Cause and Effect Diagrams, Loop Diagrams,
Functional Logic Diagrams, Terminations Diagrams, JB schedules, Gland Schedule, PLC IO list,
Panel Wiring drawing, SLD, Cable Block Diagrams.
 Preparation of AutoCAD Drawing, Panel GA Drawing, cable routing, control room layouts,
Installation Hook-up Drawings, Instrument Plot Plans, Control Panel Drawings,
Control/Equipment Room Lay-outs, Cable Tray/Trench Lay-out.
 Preparation of Cable routing, scheduling, Drum Schedule, Instrument Cable Selections, Cable
philosophy identification, Quantity estimation, interconnection drawings preparation etc.
 Review of technical documents including project design drawings, equipment specifications,
evaluate vendor data/ information and prepare comments review comments.
 Preparing/ Reviewing specifications / datasheets, interface diagrams, MTOs and any calculations
(control valve, flow element, UPS load etc.) that may be needed.
 Performing peer reviews participating in gate reviews and consultant/ Client comments on
deliverables and implementing solutions as necessary.
 Review specifications Process Data Sheets (PDS), Piping & Instrumentation Diagrams (P&ID's).
 Review Philosophies, Area Classification Drawings, Fire and Gas Detector & Layout Drawings
and other relevant documents.
 Preparation & Evaluation of all documents for the system like Terminal Automation System
(TAS), Tank Farm Management System (TFMS), Public announcement (PA), CCTV, Fire Alarm
System (FA).
 Preparation of Power Distribution Panel with SLD.
10-05-2011 to 18-12-2014
(3 year & 7 month)
Organization
FCIPL.
Designation Engineer - Instrumentation
Project
Client
Integrated Utilities & Offsite.
ONGC Petro addition Limited (OPaL),Dahej, Gujarat.
 The scope of the project includes Demineralization and condensate polishing unit (DM
CPU), Hydrogen generation unit (HGU), Pump house (Raw water & Fire water),
loading/unloading gantry, Tank farm, Flare, Control rooms (CCR, UCR, OCR & LPCR),
substations.

3.  Site Survey (DM Plant, HGU, Tank Farm, Raw Water and Fire Water Pump house,
Loading/Unloading Gantry, Control Room, Substations) and co-ordination with other
departments to provide front for Contractors.
 Checking Incoming materials as per PO and approval of the same from consultant (EIL).
 Planning, scheduling and execution of the instrumentation work.
 Preparation of DPR & WPR.
 Preparation of ITP (Inspection Test plan) and Job Procedure for Execution of
Instrumentation work.
 Verifying & Modifying of the Various Engineering Drawings like P& ID Diagrams,
Instrumentation Index, Cable Schedule, Field Location Layout and other Construction and
Process Related Drawings as per project requirement.
 Execution of the instrumentation works like installation of instruments, Cable laying,
Termination and Gladding, S.S Tubing, as per above mentioned drawings.
 Carrying out Calibration activities of the instruments like Pressure Gauges, Pressure
Transmitters, Flow transmitter, Level Transmitter, Temperature Gauges and Loop Checking
& Maintenance of all other field instruments.
 To carry out activities like instrument installation like control valve, PT, TT, LT, special type
valves, gas Detection system.
 Control room Panel erection, inter-panel cable lying, glanding ferruling and termination as
per the cable schedule.
 Carrying out activity of Loop checking & cold commissioning.
 Preparation of Ferrule, MCT Block design, Drawing Modification as per site Conditions and
Preparation of as built Drawings.
 Preparation of punch list as per client standards and ensuring its rectification within time.
 Prepared and submittal of loop checking and instrument inspection reports.
 Inspection of Materials & Preparation of QA/QC record accordingly.
 Responsible for Managing and maintaining good relationship with the company manpower
and contractor for successful completion of assigned work.
 Work as per EIL Standard.
05-08-2010 to 09-05-2011
(9 month)
Organization
FABTECH PROJECTS & ENGINEERS
Designation GRADUATE ENGINEER TRAINEE(GET)
Roles & Responsibilities
 Shift operation & maintain Daily/Monthly data.
 Modification & Automation, shutdown work, maintenance prevention and break down analysis.
 Maintenance & installation of Electrical, Electronics & Pneumatic instruments.

4.  Preventive Maintenance of control panels & Root Cause elimination of problem.
 Maintenance of various Drives.
 Energy saving & housekeeping.
 Involve in Installation and Commissioning Activities like Visual Inspection, Power up, System
Level Test, Loop Check & Functionality Test.
 Review and clarify JB Cable Schedule, Cable schedule, Instrument loop drawing, Interconnection
wiring drawings.
 Performed the modification of control circuits and control loops as per the plant change requests
and updated all related plant drawings to reflect actual changes.
 Responsible for providing existing instruments data base, logics and other documents to the
concern project team.
 Installation, Commissioning, Calibration of various field instruments PT, TT, DP, LT (DP &
Radar Type), RTD, Pressure Switch, Orifice Meter.
 Supervise installation of Hookup Air tubing, Impulse tubing & Analyzer tubing.
 Planning and Execution of plant shutdown within the stipulated time frame ensuring zero or
minimum production loss.
 Leading a team consisting of Instrument Technicians and Instrument Fitters for Installation and
commissioning, maintenance of process control and panel board instrumentation.
EDUCATION QUALIFICATION & CERTIFICATIONS
B.Tech. (ELECTRONICS & INSTRUMENTATION ENGINEERING) 2010 from (ASANSOL
ENGINEERING COLLEGE, WEST BENGAL UNIVERSITY OF TECHNOLOGY.)
PERSONAL DOSSIER
Date of Birth 01th March, 1988
Passport K8281795 valid through 09/04/2023
PAN BCMPK3961M
Language Proficiency English, Hindi.
IT Forte MS Office, Excel, Word. SPI(Smart Plant Intool),AutoCAD.
Skype ID dipeshco
DECLARATION
I hereby declare that all information stated above is true to the best of my knowledge.
DIPESH KUMAR