Dear Sir/Mam, We, at Garg Fasteners, are Premier Manufacturers of Fasteners (Bolts, Nuts, Washers, Threaded Rods, & Strut Support System, etc) for Building Construction & Infrastructure Development, Towers, Railways, Refineries & Industrial Use. We are a 3-decade Old Company & prestigious reckoned by major EPC & MNC Companies of India & around the World. Kindly Find attached below documents to demonstrate our credibility:- 1.Company Profile. 2.Product Catalogue. 3.Brief Catalogue.
2. COMPANY PROFILE
3YearsOF EXCELLENCE
The major initiatives of growth will be through strategic acquisitions and diversifications into
new product areas which will help the company in placing itself in a position of strength in
various parts of the world in supply chain management. The major initiatives of growth will
be through strategic acquisitions and diversifications into new product areas which will help
the company in placing itself in a position of strength in various parts of the world in supply
chain management.
We started the manufacturing of special purpose Fasteners in Ludhiana. With time the
experience we gained enabled us to add High Tensile Fasteners to our manufacturing
capabilities. Today we are fully equipped and have in-house facilities for manufacturing M.S.,
High Tensile, Stainless Steel, Alloy Steel and Special Purpose Fasteners. We are an ISO
9001:2015 Certified Company and offer a wide range of Alloy Steel, M.S., Stainless Steel in
precision grade as well as High Tensile Bolts, Screws, Nuts, Studs, Socket Head Bolts. Our
products conform to ASTM, BS, ISS, DIN specifications and have found wide acceptability
among government/public sector organizations. The channel of distribution is a blend of
direct marketing and a dedicated team of dealers who are located in close vicinity of the
consumer.
The company is trusted and reputed amongst its customers for providing technically robust
end to end solutions to any fastening need. It always works in close harness with its
customers through its skilled and outstanding team of human resources. We have a
accepting new challenges. We analyze each project critically and after careful consideration
ensure that the design of structures is tailored to optimally fit the required purpose. Post
production, the fabricated and galvanized metallic structures undergo a quality test to ensure
their design, resistant against weather, dimensional accuracy, high illumination, reliability
and extended durability.
3. Our R&D department mainly ensures the quality of the product
which is a very important factor when producing fasteners, no
matter if it is relating to the Automotive, Industrial, Fencing, or
Nautical industries. Quality is of vital importance. Our Quality
Assurance Department was set up by way of preventing mistakes
or defeats in our own manufacturing process, and also to provide
effective solutions if problems were to arise. GARG FASTENERS
adopts the working practises "Fit for purpose", which signifies our
components are suitable for the intended purpose and have been
approved by our customers, and "Right first time", which means
mistakes must be eliminated so only high-quality components are
manufactured from the on set of production.
QUALITY ASSURANCE
ENGINEERING CAPABILITY
All the production drawing should be accessed by multiple teams. Special requirements can be added in
production drawing, such as international standard, trade standard, data control and so on. The Jobs are
Majorly Done in Accordance to the Technical Standard Provided / or else the Drawings. The same has to
be Incorporated in Work Order , then in Job card, Without Job Card ,the Jobs cannot be implemented on
machines.
Mass productions are the same as confirmed samples always.
GARG FASTENERS
QUALITY SYSTEM
Every worker inspects the production by themselves per 10 minutes and routing inspection from QC is as
per Standard Manufacturing Quality Plan ( SMQP ).
All production are inspected by 100% before shipped out. The incoming raw materials and all shipped out
goods are inspected by different produce process.
All the production inspected according to the inspect items shown in ERP system strictly, also it was effected
on each batch in producing process.
4. TRACEABILITY
Lot no./Batch no. of raw material can track all the related information and stores Quantum produced.
Batch no. is always shared in the whole production process and procedure is operated according to the
batch no. in separate. All reports are kept recorded by Hard Copies for Max period of time, as well it can
be checked conveniently.
TYPE OF PRODUCTS
Hex Bolts & Nuts
Step Bolts & Nuts
Anti theft Bolts & Nuts
Flange Bolts & Nuts
Foundation/Anchor
Bolts With Accessory
Solar Fasteners
Studs
L Bolts , J Bolts , Bent Bolts
Flat T Head Bolts
D Head Bolt
Coach Bolts
Fish Bolts
Wing Nuts
Nylock Nuts
Pal Nuts
Thin Nuts
HSFG Washers
Weld Nuts
HSFG Bolts & Nuts
Hex Bolts With Spilt Pin Hole
Square Head Bolts & Nuts
Threaded Rods
U Hooks , U Clamps,
CSK Bolts
Eye Bolts
Lifting Eye Bolts / Eye Hook
Carriage Bolts
Banjo Bolts
Hub Bolts
Round Head Bolts
Rivets
Pins
Square Washers
Taper Washers
Tooth Washers
U-Bolts
Spring Nuts
Plain Washers
Spring Washers
Pack Washers
Hardened Washers
Eye Nuts
Square Nuts
Lock Nuts
Serrated Washers
Machined Washers
Serrated Spring Washers
Long Coupling Nuts
Strut Channel
Strut Fitting
Cantilever Arms
Hook Bolts
Heavy Hex Nuts 2H
Road Crash Barrier
Bolts & Nuts
GARG FASTENERS
5. INDUSTRIES & PRODUCTCATERED APPLICATION
I.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
xiii.
xiv.
xv.
xvi.
xvii
xviii.
Transmission Line Tower & Distribution
Sub-Station
Power Generation
PGCIL
Solar PV
Telecommunication Tower
Building Constructions.
Railways & Electrification
Rail Coach Factory (RCF)
Road Construction
Engineering Instruments Industries
Automobile Sector
Strut Support System and Strut Accessories
Heavy Industries
Wind Mill
Fencing H/w
General Purpose Projects
Refineries & Petro Chemical (Oil & Gas)
GARG FASTENERS
6. Hardened Washer
Size : 12mm to 30mm
Hardness : HV 300 min
Standard : IS 2016
Hardened Steel Washer
Size : 12mm to 56mm
Hardness : Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
Standard : ASTM F436M
USS Plain Washer
Size : 1/4 to 1 1/2
Tensile Strength : HRC 38-45
Standard : ASME B18.21.1-A
SAE Plain Washer
Size : 1/4 to 2
Tensile Strength : HRC 38-45 (Coated)
HRC 26-45 (HDG)
Standard : ASME B18.21.1-A
Spring-Lock Washer
Size : 1/4 to 1 1/2
Tensile Strength : HRC 38-46
Standard : ASME B18.21.1
Hardened Washer
Size : 1/4 to 1 3/8
Tensile Strength : HRC 38-45 (Coated)
HRC 26-45 (HDG)
Standard : ASTM F436
WASHERS
Square Section Spring Washer
Size : 3mm to 39mm
Hardness : HV 430 to 530
Standard : DIN 7980
Flat Section Spring Washer
Size : 3mm to 39mm
Hardness : HV 430 to 530
Standard : DIN 127 B
GARG FASTENERS
7. HEX NUTS
Hex Nut
Size : M6 to M80
Property Class : 8 & 10
Standard : ISO 4032
Nylock Nut
Size : M6 to M20 (Gr. 8) - M10 to M24 (Gr. 10)
Property Class : 8 & 10
Standard : DIN 982
Nylock Nut
Size : M6 to M20 (Gr. 8)- M10 to M24 (Gr. 10)
Property Class : 8 & 10
Standard : DIN 985
Hex Weld Nut
Size : M6 to M12
Property Class : 8
Standard : DIN 929
Hex Lock Nut
Size : M3 to M64
Property Class :
Standard : DIN 439, A563
Hex Nut
Size : 1/4 to 2
Grade : 8
Standard : ASME B18.2.2
Hex Nut
Size : 1/4 to 2
Grade : 5
Standard : ASME B18.2.2
Nylock Nut
Size : #8, #10(NM Pattern)-1/4 to 3/4(NE Pattern)
Grade : 2
Standard : ASME B18.16.6
10 8 10
8 10
GARG FASTENERS
8. HEX NUTS
Hex Serrated Flange Nut
Size : 1/4 to 3/4
Grade :
Standard : ASME B18.16.4
Hex Coupling Nut
Size : 1/4 to 3/4
Grade : Hardness, Rockwell B68 - C32
Standard : ASME B18.2.2
STRUCTURAL ASSEMBLIES
System HR Structural Bolt
Size : M12 to M36
Property Class : 8.8 / 10.9
Standard : BS EN 14399-3
System HR Pre-Load Nut
Size : M12 to M36
Property Class : 8 / 10
Standard : BS EN 14399-3
System HV Structural Bolt
Size : M12 to M36
Property Class : 10.9
Standard : BS EN 14399-4
System HV Pre-Load Nut
Size : M12 to M36
Property Class : 10
Standard : BS EN 14399-4
GARG FASTENERS
9. Plain Non-Chamfered Washer
Plain Chamfered Washer
Size : M12 to M36
Property Class : HV 300 to 370
Standard : BS EN 14399-5, BS EN 14399-6
Tension Control Structural Bolt*
Size : M12 to M30
Property Class : 10.9
Standard : BS EN 14399-10
Pre-Load Nut
Size : M12 to M30
Property Class : 10
Standard : BS EN 14399-10 (h=d)
Non Pre-Load Structural Bolt
Size : M12 to M36
Property Class : 4.6, 5.6, 6.8, 8.8, 10.9
Standard : BS EN 15048-1, 2
Non Pre-Load Structural Nut
Size : M12 to M36
Property Class : 4, 5, 6, 8, 10, 12
Standard : BS EN 15048-1, 2
High-Strength Structural Bolt
Size : M12 to M36
Property Class : 8.8
Standard : AS1252 - 1983 Dimensional
AS1252 - 1996 Mechanical
Structural Nut
Size : M12 to M36
Property Class : 8
Standard : AS1252 - 1983 Dimensional
AS1252 - 1996 Mechanical
Structural Washer
Size : M12 to M36
Property Class : 35-45HRC
Standard : AS1252 - 1983 Dimensional
AS1252 - 1996 Mechanical
301
R
8.8
GARG FASTENERS
10. STRUCTURAL ASSEMBLIES
Heavy Hex Structural Bolt
Size : M16 to M36
Property Class : 10.9S
Standard : IS 3757
Heavy Hex Nut
Size : M16 to M36
Property Class : 10S / 8S
Standard : IS 6623
Structural Washer
Size : M16 to M36
Property Class : 35-45 HRC (Plain)
26-45 HRC min (HDG)
Standard : IS 6649
Heavy Hex Structural Bolt
Size : ½ to 1 1/4
Tensile Strength/Hardness : 120,000 ps
(1/2 to 1 dia), 105,000 psi(1 1/8 to 1 1/2 dia)
Standard : ASTM A325
Heavy Hex Structural Bolt
Size : ½ to 1 1/4
Tensile Strength/Hardness :
150,000 - 173,000 psi
Standard : ASTM A490
Heavy Hex Nuts Grade DH
Size : 1/4 to 2
Tensile Strength/Hardness : C24 - C38
Standard : ASTM A563
Heavy Hex Nut Grade 2H
Size : 1/4 to 2
Tensile Strength/Hardness : 24-35 HRC
Standard : ASTM A194 2H
Hardened Washer
Size : 1/4 to 1 3/8
Tensile Strength/Hardness : 38-45 HRC (coated)
26-45 HRC (HDG)
Standard : ASTM F436
2H
DH
GARG FASTENERS
11. Tension Control Structural Bolt*
Size : 5/8 to 1 1/8
Tensile Strength/Hardness : 120,000 psi
(1/2 to 1 dia), 105,000 psi (1 1/8 to 1 1/2 dia)
Standard : ASTM F1852
Tension Control Structural Bolt*
Size : ½ to 1 1/8
Tensile Strength/Hardness :
150,000 - 173,000 psi
Standard : ASTM F2280
Stud Bolt
Size : M12 to M56
Property Class : B7, B7M, B8, B8M, B16, L7, L7M
Standard : ASTM A193M, ASTM A320M
Nut
Size : M12 to M56
Property Class : 2H, 2HM, 4, 7, 8, 8M
Standard : ANSI B18.2.4.6M, A194M
Stud Bolt
Size : ½ to 2 1/4
Grade : B7, B7M, B8, B8M, B16, L7, L7M
Standard : ASTM A193, ASTM A320
Nut
Size : ½ to 2
Grade : 2H, 2HM, 4, 7, 8, 8M
Standard : ASTM A194
PETROCHEMICAL
GARG FASTENERS
12. SPECIALS
Arc Welding Stud /A Shear Connector
Size : M13 to M25
Property Class : Type SD1,SD2 &
Type A, Type B
Standard : ISO 13918, AWS D1.1
Tee Bolt
Size : M8 to M24
Property Class : Tensile strength: 1250 Mpa
Hardness: HRC 40 to 43
Trackshoe Bolt
Size : M16 to M27
Property Class : as per Specification
Standard : as per Specification
Square Nut
Size : M16 to M27
Property Class : as per Specification
Standard : as per Specification
Hex Lock Nut
Size : M3 to M64
Property Class : as per Specification
Standard : DIN 439, A563
Hex Slotted & Castle Nut
Size : M6 to M48
Property Class : as per Specification
Standard : DIN 935, 937 A563
Anchor Plate
Size : M16 to M24
Property Class : as per Specification
Standard : as per Specification
Shear Nut
Size : M8 to M16
Property Class : as per Specification
Standard : as per Specification
1612
ceramic
ferrule
GARG FASTENERS
13. Anti-Theft Bolt
Size : M12 to M16
Property Class : as per Specification
Standard : as per Specification
Carriage Bolt
Size : M5 to M20
Property Class : as per Specification
Standard : DIN 603
Threaded Bar
Size : M6 to M64
Property Class : 4.6, 5.8, 6.8, 8.8, 10.9, 12.9
Standard : DIN 975 / DIN 976
Tee Bolt
Size : BSW 3/8 to 1
Grade : Tensile Strength: 180 ksi
Standard : as per Specification
Carriage Bolt
Size : #10 to 1
Grade : Grade A
Standard : ASTM A307
Trackshoe Bolt
Size : 5/8 to 1
Grade : as per Specification
Standard : as per Specification
Square Nut
Size : 5/8 to 1
Grade : as per Specification
Standard : as per Specification
Threaded Bar
Size : 1/4 to 2
Grade : B7, B7M, B8, B8M, B16, L7, L7M
Standard : ASTM A193
SPECIALS
1612
GARG FASTENERS
14. STAINLESS STEEL
Socket Head Cap Screw
Size : M3 to M30
Property Class : A2-70/80, A4-70/80
Standard : DIN 912 / ISO 4762
Hex Head Screw (Full Thread)
Size : M3 to M30
Property Class : A2-70/80, A4-70/80
Standard : DIN 933 / ISO 4017
Hex Head Bolt (Partial Thread)
Size : M4 to M30
Property Class : A2-70/80, A4-70/80
Standard : DIN 931 / ISO 4014
Hex Nut
Size : M3 to M30
Property Class : A2-70/80, A4-70/80
Standard : DIN 934 / ISO 4032
Non Pre-Load Structural Bolt
Size : M12 to M36
Property Class : A2-50, A4-50, A2-70,
A4-70, A2-80, A4-80
Standard : BS EN 15048-1, 2
Non Pre-Load Structural Nut
Size : M12 to M36
Property Class : A2-50, A4-50, A2-70,
A4-70, A2-80, A4-80
Standard : BS EN 15048-1, 2
Plain Washer
Size : M3 to M64
Property Class : A2, A4
Standard : DIN 125 A
Flat-section Spring Washer
Size : M3 to M36
Property Class : A2, A4
Standard : DIN 127 B
A2-70
X X
GARG FASTENERS
15. Square-section Spring Washer
Size : M3 to M36
Property Class : A2, A4
Standard : DIN 7980
Threaded Rod
Size : M3 to M36
Property Class : A2-70/80, A4-70/80
Standard : DIN 975
Socket Head Cap Screw
Size : 3/16 to 1
Grade : F837B & F837E
Standard : ASME B18.3 / F837
Hex Head Bolt/Screw
Size : 1/4 to 1
Grade : ASME B18.2.1 / ASTM F593
Standard : ASME B18.3 / F837
304, 316 Hex Nut
Size : 1/4 to 1 1/2
Grade : F594C, F594D & F594G, F594H
Standard : ASME B18.2.2 / F594
Plain Washer
Size : 1/4 to 1
Grade : 304, 316
Standard : ANSI B18.21.1
STAINLESS STEEL
A2
X X X X 304
GARG FASTENERS
16. X X
SOCKET SCREWS
Socket Head Cap Screw
Size : M08 to M16
Grade : 12.9
Dimensional : ASME - B18.3.1M
ISO - 4762
Material : ASTM - A574M
Socket Low Head Cap Screw
Size : M08 to M16
Grade : 10.9
Dimensional : as per Specification
Material : as per Specification
X X
Button Head Socket Screw
Size : M08
Grade : 012.9
Dimensional : ASME - B18.3.4M
ISO - 7380
Material : F835M
Flange Button Head Socket Screw
Size : M16
Grade : 012.9
Dimensional : as per Specification
Material : F835M
Socket Head Cap Screw
Size Range : Diameter -
Thread - 1936 & 1960 UNC/UNF/BSW
Tensile psi / Hardness : 190,000 _< 1/2
180,000 > 1/2
Dimensional : ANSI/ASME - B18.3
BS - 2470
Material : ASTM - A574
Socket Low Head Cap Screw
Size Range : Diameter -
Thread - UNC/UNF
Tensile psi / Hardness : 170,000
Dimensional : as per specification
Material : ASTM - F835
GARG FASTENERS
17. GARG FASTENERS
U Clamp/U Bolt
Size : M10 to M20/ 3/8"-3/4"
Grade : Low Carbon Steel, High Carbon Steel
Standard : Drawing
U Clamp/U Bolt
Size : M10 to M20/ 3/8"-3/4"
Grade : 304, 316
Standard : Drawing
L Bolt/J Bolt
Size : M8 to M24/ 3/8"-1"
Grade : Low Carbon Steel, High Carbon Steel
Standard : Drawing
L Bolt/J Bolt
Size : M8 to M24/ 3/8"-1"
Grade : 304, 316
Standard : Drawing
BENT BOLTS
18. PINS
Dowel Pin
Size : 2mm to 16mm
Hardness : HRC 50-58 (core)
Standard : as per specifications.
Dowel Pin
Size : 1/8 to 1
Hardness : HRC 50-58 (core)
Standard : as per specifications.
Hex Head Bolt/Screw
Size : M4 to M80
Property Class : 10.9
Tensile Strength : 1040N/mm2min
Standard : ISO 4017 (Full Thread)
ISO 4014 (Half Thread)
Hex Cap Screw
Size : 1/4 to 2
Grade : 8
Tensile Strength : 150,000 psi min
Standard : ASME B18.2.1
Hex Cap Screw
Size : 1/4 to 2
Grade : 5
Tensile Strength : 120,000 psi min (1/4 to 1),
105,000 psi min (over 1 to 1-1/2)
Standard : ASME B18.2.1
Hex Bolt
Size : 1/4 to 1
Grade : A
Tensile Strength : 60 ksi min
Standard : ASTM A307 / ASME B18.2.1
HEX BOLTS / SCREWS
GARG FASTENERS
19. STRUT SUPPORT SYSTEM
Strut Channel
Size : 1-5/8", 3-1/4", 13/16"
Length : 10Ft., 20Ft.
Finishes : Pre Galvanized, Hot Dip Galvanized
Strut Washer
Size : 1-1/4", 7/8"
Finishes : Electro Galvanized, Hot Dip Galvanized
Channel Nut without Spring
Size : 1/4" to 3-1/4"
Finishes : Electro Galvanized, Hot Dip Galvanized
Channel Nut with Spring
Size : 1/4" to 3/4"
Finishes : Electro Galvanized, Hot Dip Galvanized
GARG FASTENERS
Clevis Hanger
Size : 1/2" to 16"
Grade : SS-304, SS-316
Finishes : Polished
CLEVIS HANGER
Clevis Hanger
Size : 1/2" to 24"
Grade : Carbon Steel
Finishes : Electro Galvanized, Self, Color Coated
21. Quality...
Reliability...
Supports...
Sherpur, Ludhiana (PB) INDIA.
Mobile : +91-62395-05015
E-mail : sales2@gargfasteners.co.in, gargfast@gmail.com,
www.gargfasteners.com
Address : Street No. 5, Bhagat Singh Colony, Near Swaran Cinema,
GARG FASTENERS
AN ISO 9001:2015 CERTIFIED COMPANY
