Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.

Steve Hemmings, Siniat, Go Green December Business Breakfast, St Mary Redcliffe Church, 2 Dec 2015

505 vues

Publié le

Steve Hemmings describes how Siniat follow a Circular Economy approach in the manufacture of their plasterboard.

Publié dans : Environnement
  • Soyez le premier à commenter

  • Soyez le premier à aimer ceci

Steve Hemmings, Siniat, Go Green December Business Breakfast, St Mary Redcliffe Church, 2 Dec 2015

  1. 1. The Circular Economy: Plasterboard Case Study Steve Hemmings Head of EHS & Sustainability, Siniat Ltd November 2015
  2. 2. 2 About Siniat: Who we are • Leading UK manufacturer of plasterboard and supplier of drywall systems – 430 employees – £150 million turnover • Our main raw material is gypsum* – 95% of board composition: strategic importance map * Calcium sulphate di-hydrate, CaSO4 . 2H2O Production Plant Depot
  3. 3. 3 Gypsum: Perfect material for the Circular Economy Raw material (gypsum) • Finished product is same chemical substance as the starting raw material • Material can therefore be recycled many times without loss of quality • Recycling of construction site waste is already widely practised Plasterboard (gypsum) Hydrate Remove Paper Heat Plaster
  4. 4. 4 Gypsum: 2 Main Sources • Left: Natural Gypsum imported by sea to Bristol (approx 65%) • Below: By-product Gypsum from neighbouring power station to Ferrybridge (approx 35%)
  5. 5. 5 Outlook for By-product Gypsum EU Carbon plan means coal-fired electricity generation will decline in Europe; By-product gypsum availability after 2020 will be significantly reduced Circular Economy solution: to avoid a return to mining virgin material, harvest the gypsum resource already in the built environment Challenge: progressively replace by-product gypsum with material from the deconstruction of buildings Forecast Gypsum Production (Mt/year)
  6. 6. Introducing the Project: “Gypsum to Gypsum” (G2G) • 1 of 16 supply-chain partners in 7 countries • €3.5 million budget • Project Objectives – 1. Design for deconstruction – 2. Material segregation at end of life – 3. Boosting recyclate levels to 30% in new products To meet this challenge Siniat joined an EU LIFE funded R&D Project (2013 -2015)
  7. 7. G2G Project Results November 2015 Project results presented in Brussels 17 November – 5 pilot deconstruction recycling trials in 4 countries – Average Site Cost savings (deconstruction with segregation/ recycling versus demolition and landfilling mixed waste) were 10% – Recyclate inclusion rates of 18-30% achieved – Cost, Energy and Carbon neutral for production – Life cycle carbon savings of 9% versus business as usual (cradle to cradle) The UK pilot trial included gypsum materials harvested in the 2015 EU Green Capital….
  8. 8. G2G Project Results The Circular Economy in Bristol Material from St Lawrence House (Nelson St) refurbishment was recycled into new plasterboard product used in its conversion to student accommodation The objective of a circular economy is to preserve and maintain the value of products and materials in the economy for as long as possible, while reducing the excessive consumption of primary resources as well as minimising the generation of non-recyclable waste European Commission Circular Economy Action Plan, 2 December 2015