This document provides information about Amrapali, a manufacturer of phenolic, thermosetting, and silicone parts established in 1970 in India. It has grown from an initial unit with 30 employees and 1000 square feet of space to a 65,000 square foot facility located 150 km from Mumbai. The document outlines Amrapali's manufacturing capabilities, production capacity using various molding machines, example parts produced, export markets, and vision for continued growth and quality improvement through new technologies.
2. Introduction
• Amrapali founded in 1970, is a manufacturer ofp 97 ,
Phenolic/Thermosetting, Silicone, Stainless
Steel parts for electrical, automotive and
household industry in INDIA.
3. Establishment
• Amrapali started in 1970 with employment strengthp p y g
of 30 people, traditional old machine known as hand
press machine with a small unit of 1000 sq ft area.
• Now Amrapali is having 65000 sq feet located at
Daman 150 km from Mumbai.
5. Technical Information
• Material: Phenolic Molding.
Resistant to Temp: 30c to 280c• Resistant to Temp: -30c to 280c
• Resistant to: Dilute Minerals Acids, Oils,
Alcohols Detergents GreaseAlcohols, Detergents, Grease,
Weather ability
(Including UV Light).( g g )
6. Th 1 t U itThe 1st Unit
which started in
MUMBAI with
HAND PRESS
MOLD
MACHINEMACHINE.
8. Manufacturing CapabilitiesManufacturing Capabilities
Well equipped manufacturingWell-equipped manufacturing
set-up with
• Injection machines
• Hydraulic machines• Hydraulic machines
• Tabletting machines
• Preheaters
O f t i• Oven for post curing
• Center less Grinding
• Semi automatic Finishing
lilines
• Moulds, tools & dies
9. Strength of Amrapali
• Employees working since last 15-20 years.
SS Wire Handle Mfg Division & In house• SS Wire Handle Mfg. Division & In house
Polishing.
• Automatic Deflashing Machine• Automatic Deflashing Machine.
• Silicone Handle Moulding capability.
10. Production CapacityProduction Capacity
• 28 Horizontal Injection Molding Machines
1 U it 130 T▫ 1 Units - 130 Tons.
▫ 2 Units – 150 Tons.
▫ 2 Units – 180 Tons2 Units 180 Tons.
▫ 1 Unit - 220 Tons.
▫ 2 Units - 250 Tons.5
▫ 19 Units - 300 Tons.
▫ 1 Unit – 330 Tons.
• 1 Vertical Injection Molding Machines
• 18 Compression cum Transfer Molding Machines
(6 T )(60 - 100 Tones).
• 1 Hand Molding Machine
11. Phenolic/Silicone Parts
I j ti ld d I j ti ld d I j ti ld dInjection molded
Thrust Piece for
automotive application
Injection molded
Phenolic part for
automotive application
Injection molded
Phenolic part for
Electrical application
Phenolic part for
Industrial application
Silicone part for
Kitchenware application
Silicone ring for
Kitchenware application
14. Tools and Capacitiesp
• Moulds are being made by latest
technology like CNC Milling Wire Cut astechnology like CNC, Milling, Wire Cut as
per the IGES model as desired by the
customer.customer.
• In house Tool Room for Maintenance.
• Tools ranging from 2 cavities to Multig g
cavities.
15. Export Area
W h l d Middl E S h A i• We have explored to Middle East, South America
& Europe.
17. Vision & Goal
• Up gradation of quality by addition of latest
technology automation and logisticstechnology, automation and logistics.
• Coming up with new product lines based upon• Coming up with new product lines based upon
safety , latest technologies and Trends.
• Ensure that the products we provide are
acceptable and accessible worldwide.