SC2 PRESTIGE YELLOW PUTTY: Stucco universale ad alto peso specifico idoneo per la stuccatura di lamiere zincate ed alluminio, dotato di ottima spatolabilità, morbidezza e compattezza.
SC2 PRESTIGE YELLOW PUTTY: Universal Putty specially designed for applicaton on galvanized sheet and aluminium, endowed with good spreadability, softness and compactness.
SC2 PRESTIGE YELLOW PUTTY - Stucco per lamiere zincate ed alluminio / Putty for galvanized sheet and aluminium
1. Stucco universale, particolarmente compatto e morbido.
Unisce la facilità di spatolabilità e carteggiatura
ad un’ottima finitura.
Adatto alla stuccatura di ogni superficie.
La sua particolare composizione permette
un’eccezionale adesione su alluminio e lamiere
zincate a caldo e a freddo.
La sua reattività consente rapidi tempi di azzeramento
anche a strati sottili.
Disponibile nel colore giallo.
Universal Putty, extra compact and soft.
It combines high spreadability and easy sanding
with an excellent finish.
Suitable for the filling of all kinds of surfaces.
Its special composition allows to obtain
exceptional adhesion on hot/cold galvanized sheet
and aluminium.
Its reactivity allows rapid sanding time
even in thin layers.
Available in yellow colour.
SC2 PRESTIGE
YELLOW PUTTY.
PUTTY FOR
GALVANIZED SHEET
AND ALUMINIUM.
SC2 PRESTIGE
YELLOW PUTTY.
STUCCO PER LAMIERE ZINCATE
E ALLUMINIO.
www.icrsprint.it
2. B) NOTE TECNICHE:
Composizione: Resine poliestere insature e cariche minerali speciali
Peso specifico: 1,85 ± 0,05 Kg/Lt
Colori disponibili: Giallo Ocra Chiaro
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
C) PREPARAZIONE DEL SUPPORTO:
• Lamiera zincata, alluminio e sue leghe, ferro,
lamiera d’acciaio, plastiche
• Vernici originali o vecchie verniciature ben consolidate
• Pulire bene la superficie da trattare con Antisil V09
e assicurarsi che sia asciutta e priva di silicone, cere
grassi e sostanze estranee in genere
• Su fondi o smalti carteggiare e pulire la superficie
prima di stuccare
D) AVVERTENZE:
> Miscelare accuratamente lo stucco con il 1-3%
di induritore in pasta. Evitare l’uso di una dose eccessiva
di induritore perchè potrebbero generarsi macchie
di perossido in fase di verniciatura.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE:
1-3% induritore in pasta potlife 3-5’ a 20° C
Applicazione a spatola
< 30’ a 20° C
4-5’ a 1 mt
P80-P120 sgrossatura
P180-P220 rifinitura
F) PULIZIA DEGLI ATTREZZI:
> Con diluente nitro o da lavaggio.
G) PROSECUZIONE DELLA LAVORAZIONE:
> Primer A14
> Stucco Spray F18
> Fondi Poliacrilici: F30, F31, F32, F33
> Fondi Acrilici: F76, F77, F78, F79, F12
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle
nostre esperienze. Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non
essendo le condizioni di utilizzo sotto il nostro controllo, non assumiamo nessuna
responsabilità sui risultati ottenuti.
A) DESCRIZIONE E CAMPO D’IMPIEGO:
Stucco universale ad alto peso specifico idoneo per la stuccatura di ogni tipo di
supporto, dotato di ottima spatolabilità, morbidezza e compattezza. La sua
particolare composizione permette un’eccezionale adesione sulla lamie-
ra zincata. La carteggiatura è facile e l’essiccazione e la finitura ottime.
Rapidi tempi di azzeramento grazie al rapido indurimento in profondità
e su strati sottili. Il VOC del prodotto pronto all’uso risulta inferiore ai 250
g/l, limite di categoria dettato dalla Normativa Europea 2004/42.
IT SCHEDA TECNICA SC2
SC2 PRESTIGE YELLOW PUTTY
Stucco per lamiere zincate ed alluminio
SC2 PRESTIGE YELLOW PUTTY
Putty for galvanized sheet and aluminium
A) DESCRIPTION AND FIELDS OF APPLICATION:
Universal Putty specially designed for applicaton on different supports,
endowed with good spreadability, softness and compactness.
The special resins employed allow for excellent adhesion on galvanized
sheet. Voc less than 250 g/l according 2004/42CE.
EN TECHNICAL SHEET SC2
INDUSTRIA CHIMICA REGGIANA - I.C.R. S.p.A - Sede e Stabilimento: 42124 Reggio Emilia - Via M. Gasparini, 7 - Tel. +39 0522 517803 - Fax +39 0522 514384
Stabilimento di Lodi: 26817 S. Martino in Strada (LO) - Via del Commercio, 1 - Tel. +39 0371 475313 - Fax +39 0371 475370 - info@icrsprint.it - www.icrsprint.it
ICR Ibérica S.A. - Pol. Ind. Sta. Magdalena, C/ Guillem Rovirosa 18-24 - 08800 Vilanova i la Geltrú, España - Tel. +34 93 8932695 - Fax +34 93 8143495 - info@icriberica.com
B) TECHNICAL DATA:
Composition: Unsaturated polyester resin and special mineral charges
Specific weight: 1.85 ± 0.05 Kg/Lt
Available colours: Yellow light Ocre
Safety data: Refer to the safety sheet
C) SURFACE PREPARATION:
• Galvanized sheet iron, aluminium and its alloys,
iron, steel plate, plastics
• Original paints or aged topcoat finishes
• Clean well the surface to be treated with V09 Antisil.
Make sure it is dry and free from silicone, wax, grease
and any extraneous material
• On base coats or enamel top coats, sand and clean
the surface before applying the filler
D) CAUTIONS:
> Mix well the filler with 1-3 % paste hardener.
Do not exceed with the hardener to avoid risk
of staining during painting operations.
> Do not utilize the product at temperatures below 5°C.
> Store in a cool and dry place.
E) PROCESSING:
1-3% C10 paste hardener potlife 3-5’ at 20°C
Application with putty knife
< 30’ at 20° C
4-5’ at 1 mt
P80-P120 roughing-out
P180-P220 finishing
F) TOOLS CLEANING:
> With nitro or washing thinner.
G) RECOATING:
> Primer A14
> Polyester Spray PE Filler: F18
> Acrylic-Polyurethane Filler: F30, F31, F32, F33
> Acrylic Filler: F76, F77, F78, F79, F12
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.