Bite marks can provide important evidence in criminal cases. To collect this evidence, investigators take impressions of bite marks using materials like polyvinyl siloxane or alginate. The impression material is applied directly to the injury and reinforced with cotton and dental plaster. This process creates dental stone models of the bite mark that can be analyzed and presented in court. However, impressions may not always be possible if the victim is living or there is excessive swelling at the injury site.
2. Bite marks or Bite
Patterns
Occurs when teeth actively
contact and compress softer
material such as human flesh,
food material such as cheese or
an apple, or other inanimate
objects such as Styrofoam cups.
3.
4. These bite marks
may be one of the
physical and
biological
evidences left by
criminals at the
site of criminal act.
5. In order to collect
evidence from these bite
marks, one of the
method used by
investigators is to
establish a good Bite
Mark Impression.
6. Bite Mark Impression
Plays a very important role
in solving the criminal
cases.
Should be taken only after
taking the photographs and
swabs of the injury site.
7. Bite Mark Impression
Taking
Various dental materials have
been used (e.g. alginate,
silicone) for taking the
impressions of the bite marks,
but the most commonly used
is the Polyvinyl Siloxane.
9. The advantage of Polyvinyl
Siloxane is that they can be
poured numerous times if there is
an error.
Alginate can also be used for
taking the impressions. However
the main drawback in using alginate
as an impression material is that
they have to be poured with one to
two hours to prevent contraction.
11. 2. A light body
impression
material is
expressed into
the injury site
with a syringe
and is allowed to
completely cover
the injury.
12. 3.Cotton backing is
placed onto the
impression
material. *The
backing material
must be contoured
to the anatomical
contour of the
injury site.*
13. 4. Dental plaster is
placed onto the
cotton packing.
*This
reinforcement will
prevent the
inaccuracies being
developed in the
impressions due to
physical distortion.
14. These impressions are then
used to create dental stone
models.
We should make two stone
casts. One is used for analysis
purpose and the second cast is
preserved for presentation in
the court.
15. This entire process of
impression taking and dental
stone model fabrication
should be properly
photographed.
16. Impressions of the bite mark
are not always practical.
If the victim is living,
normally this procedure Is
not performed because the
indentions will disappear by
the time of examination.
17. Furthermore, if there’s an
extensive amount of
swelling and bleeding in the
injury site, the impression
procedure may not anymore
be practical.