3D Printing & Additive Manufacturing: Industrial Applications Summit 2013 - the world's first industry-led forum designed specifically to identify the real business benefits and new opportunities these technologies present.
Hosting a cross-section of industry leaders and experts, you will be able to gain first hand insights on successful commercial applications, state of the art developments, and ultimately the steps necessary to enable scalability.
The Ultimate Guide to Choosing WordPress Pros and Cons
3D Printing Industrial Applications Summit
1. Simon Bradley
VP , Global Innovation Network
EADS
19-20 November, 2013
Post Summit Workshop 21 November, 2013
London | UK
Stephen Morgan
Group Leader, Advanced Technology Division
BAE Systems
Konrad Wissenbach
HeadofAdditiveManufacturingandFunctionalLayers
Fraunhofer ILT
Prof. Mark Miodownik
Director,InstituteofMaking
University College London
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
Organised By:
P INDUSTRIAL APPLICATIONS: Lessons from early adopters and case studies of
additive manufacturing technologies in application today: Where does the rubber
meet the road?
P MATERIAL DEVELOPMENTS: Understanding what is possible today and the latest
advances with the use of metals and plastics
P STATE OF THE ART CAPABILITIES: Assessing the latest innovations in additive
manufacturing machines and applications: Which technologies are receiving attention
in terms of investment and research?
P DESIGNING FOR ADDITIVE MANUFACTURE: Examining practical applications
of new design processes and shapes to overcome limitations of traditional
manufacturing processes and create new functionality
P EQUIPMENT & MATERIAL COSTS: Understanding current capital cost limitations
as a function of size and fidelity: What should a financial balance sheet look like to
justify investment?
P POTENTIAL FOR MASS PRODUCTION: Assessing scalability barriers to producing
reliable, reproducible products at high quality
P INTELLECTUAL PROPERTY: Exploring solutions for addressing challenges around
intellectual property, data security and product authenticity
The First Summit Focused Specifically On Business Benefits & Requirements Of
Industry With Key Issues Being Discussed To Include:
Hear From 20+ Industry Leaders &
Pioneering Experts Including:
The World’s First Industry-Led Global 3D Printing And Additive Manufacturing Summit
Register By Friday
4October,2013
SAVEUPTO
£200
Dr. Rainer Rauh
VP, Head of Materials and Processes
EADS
Veena Pureswaran
Global Electronics Industry Lead
IBM
Jessica Middlemiss
Senior Materials Engineer
Dyson
Lorenzo Lorenzi
Advanced Manufacturing Leader
GE Oil & Gas
Curtis Carson
Head of Systems Integration -
Manufacturing Engineering
Airbus
2. Dear Colleague,
Would you like to find out how to leverage 3D printing and additive manufacturing
technologies to generate business benefit beyond traditional manufacturing?
If so, join us at the 3D Printing & Additive Manufacturing Industrial Applications
Summit 2013, where you will hear detailed strategic and technical discussions from
20+ VPs, R&D Directors, Department Heads and pioneering research leaders on the real
business opportunities and practical applications available with these technologies today.
There has been much hype around the transformational potential of 3D printing and
additive manufacturing technologies, which now seem to be gaining critical mass and
momentum in their applications. However for businesses to justify investment, clarity
is required on what these new technologies really mean in terms of commercial
opportunities for industrial production. Specifically the costs, limitations and
identification of where these processes could generate new value alongside traditional
manufacturing methods.
Bringing together a cross section of industry leaders and experts to assess successful
commercial applications, state of the art developments, and ultimately the steps
necessary to enable scalability; we are delighted to invite you to the world’s first
industry-led 3D printing and additive manufacturing summit.
Building on our reputation for addressing the hottest industry issues, our industry-
led summit will not only provide you with the opportunity to network with key
industry players but will also arm you with the knowledge you need to fully evaluate
opportunities for your business.
Please take a look through the enclosed agenda and visit
www.3d-printing-additive-manufacturing.com for
the fastest way to register.
We look forward to welcoming you to London in November.
Kind regards,
3D Printing & Additive Manufacturing Team
Be part of the world’s first
industry-led global 3D printing
and additive manufacturing summit
to examine successful commercial
applications and strategic reasoning
behind technology investment
1
Hear from 20+ Industry Leaders
from sectors such as Aerospace,
Automotive, Defence, Electronics and
Retail and join in active discussions
to find out the facts on issues such
as capacities, volumetric constraints,
repeatability and reliability
2
Discover the state-of-the-art
in equipment capabilities,
developments in alloy & polymer usage
and clarity on costs to inform the
business case for adoption
3
Gain insights into early adopters
visions for mass production and
case studies on additive manufacturing
technologies in application today from
hands-on industry leaders and select
pioneering academics
4
5 Explore practical applications of
new design processes and cutting-
edge developments on creation of new
shapes and integrated functionality
6 Enjoy exclusive networking
opportunities across three days
including a drinks reception at the end
of Day One providing an invaluable
opportunity to form and nurture
business partnerships
7 Destination Location - London,
UK: Take the opportunity to enjoy
this world-leading cultural capital as
the backdrop for informal networking
outside the conference proceedings
19-20 November, 2013 | London | UK
REGISTER BEFORE
FRIDAY 4 OCTOBER
SAVE UP TO
£200See back page for details.
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
7Key Reasons
To Attend
3. 8.50 Chair’s Opening Remarks
KEYNOTE: INDUSTRY VISIONS FOR 3D PRINTING
9.00 Industry Leader Visions On New Possibilities And
Opportunities – How Can 3D Printing Be Leveraged
To Generate Business Benefit Beyond Traditional
Manufacturing?
• Assessing the business benefit of 3D printing technologies
over and above current manufacturing processes: What
can it currently be used for and what are the future
possibilities?
• Understandingpossibilitiesforwhereadditivemanufacturing
canbeemployedwithinaportfolioofproducts:Whatare
industryleaders’midtolong-termvisions?
• Benchmarking the cost and relative capabilities against
the scope of the opportunities that could be created: Is
there a strong enough business case to pursue first time
manufacture applications?
• Identifying the gap between theory and practical
application today: Where does the rubber meet the road?
Dr. Rainer Rauh, VP Head of Materials and Processes, EADS
Veena Pureswaran, Global Electronics Industry Lead, IBM
Lorenzo Lorenzi, Advanced Manufacturing Leader, GE Oil & Gas
9.45 Question & Answer Session
STATE OF THE ART
Assessing Cutting-Edge Work Of Early Adopters,
Innovations From Academia And Current
Capabilities Of Additive Manufacturing Equipment
STATE OF THE ART: EARLY ADOPTERS PANEL
10.00 Examining Early Adopters’ Thinking Behind
Commercial Application Of 3D Printing – What Is The
State Of The Art And Where Are We Headed?
• Revealing the motivations and strategic reasoning behind
technology investment
• Gauging what is currently state of the art: Showcasing
success stories of additive manufacturing process
adoption for new and existing products
• Identifying key bottlenecks experienced with
industrialisation of processes: What progress is being
made to overcoming these?
• Understanding thinking behind how business models will
need to evolve to integrate future additive manufacturing
processes
• Examining industry roadmaps and plans for commercial
use of 3D printing
Richard Brady, Advanced Digital Manufacturing Leader, Williams F1
Ralf Schwenger, R&D Director, HEAD Sports
Steve Tremlin, Prototyping Manager, Dyson
10.45 Question & Answer Session
11.00 Morning Refreshments In Exhibition Showcase Area
STATE-OF-THE-ART MACHINES: COSTS AND
CAPABILITIES FOR PRODUCTION
11.30 Examining The Latest Innovations In Industrial
Additive Manufacturing – What Are The Capabilities Of
New Machines And What Are Their Ownership Costs?
• Exploring the latest technological innovations in additive
manufacturing: Which technologies are receiving attention
in terms of investment and research?
• Appraising mid and long-term equipment outlooks: What
types of equipment are in the pipeline and what additional
capabilities will they offer?
• Understanding the current cost of 3D printing machinery
and additive manufacturing technologies: How quickly are
equipment costs going to come down?
• Assessing advancements with machines in terms of
potential for mass production: Will they ever be fast
enough to manufacture products for mass production?
Prof. Manos Tentzeris, School of Electrical and Computer
Engineering, Georgia Institute of Technology
12.00 Question & Answer Session
Day One
Tuesday 19th
November, 2013
EXPLORING BUSINESS OPPORTUNITIES, SUCCESSFUL
INDUSTRIAL APPLICATIONS AND THE STATE OF THE ART
COMMERCIAL APPLICATIONS: WHAT CAN WE
DO RIGHT NOW?
Exploring How Companies Have Made Their
Businesses More Efficient And Created New
Value With 3D Printing And Additive
Manufacturing Processes
A: SUCCESSFUL SMALL-SCALE PRODUCTION AND
BESPOKE APPLICATIONS
12.10 – 3.00 Showcasing Examples Of Applications
For Low-Volume Production And Highly Bespoke
Components And Products
AEROSPACE & DEFENCE
12.10 Examining Aerospace And Defence Applications
Of Additive Manufacturing Technologies For End-Use
Production
• Identifying applications for end-use aerospace
components: Which materials and processes are currently
able to produce aerospace-certified components?
• Understanding how the aerospace and defence industries
are introducing additive manufacturing processes into
their business models: What do their new balance sheets
look like?
• Exploring applications in defence to reduce costs while
increasing production versatility
• Assessing the current market for additive manufacture
in aerospace: Which current applications can be
developed further?
Curtis Carson, Head of Systems Integration - Manufacturing
Engineering, Airbus
12.40 Question & Answer Session
AUTOMOTIVE
12.50 Analysis Of Applications In Automotive For
Bespoke Vehicle Customisation And Low-Volume
Production Of Performance-Enhancing Components
– Which Applications Have Been Successful So Far?
What Are The Prospects For Mass Production?
• Examining niche applications being applied to add new
value to automotive products
• Exploring applications for vehicle interior personalisation
and customisation: What are the cost implications for
introducing AM-produced components on a bespoke
basis?
• Assessing approaches for integrating components
produced using additive manufacturing methods on a
traditional production line
• Highlighting applications in Formula 1 for highly bespoke,
high quality components: How can these production
processes be transferred into mainstream automotive cost
effectively?
Vaibhav Taide, Team Leader - Rapid Prototyping, Scuderia Toro
Rosso
1.20 Question & Answer Session
1.30 Networking Lunch In Exhibition Showcase Area
BIOMEDICINE
2.30 Exploring Cutting-Edge Applications Of 3D Printing
Technologies In Biomedicine – Can These Pioneering
Applications Be Transferrable To Other Industries?
• Identifyingapplicationsforprintinghighlybespokealloy
medicalcomponentscost-effectively:Whichtechnologiesare
beingusedtoproducehigh-endequipmenteconomically?
• Examining high-end applications in dentistry and medicine
using advanced polymeric materials: Which materials
are approved for additive manufacture?Sharing success
stories of life-saving applications of advanced additive
manufacturing technologies: Which production challenges
did additive manufacture overcome?
• Exploring cutting-edge applications of 3D printing in the
medical community: Which applications can be transferred
into other industries?
Prof. Scott Hollister, Professor of Biomedical Engineering and
Mechanical Engineering, University of Michigan
3.00 Question & Answer Session
B: EQUIPMENT REPAIR AND REMANUFACTURE
APPLICATIONS
3.10 Examining Use Of 3D Printing To Make Parts For
Repair And Remanufacture – What New Possibilities Are
Feasible Right Now?
• Examining advances producing 3D-printed components
and equipment for use in remote locations
• Assessing existing and planned applications for
manufacturing new and replacement parts including the
design and build of support equipment
• Identifyingopportunitiesforapplicationsofadditiveprocesses
fortheremanufactureofdegradedorobsoletecomponents
• Showcasing innovative approaches to on-site additive
manufacture: What are the new possibilities for repair and
remanufacture?
• Exploring the feasibility of business models offering spares
or repairs as downloadable components
Facilitated by: Stephen Morgan, Group Leader - Materials
Engineering, Advanced Technology Centre, BAE Systems
3.40 Question & Answer Session
3.50 Afternoon Refreshments In Exhibition Showcase Area
C: RAPID PROTOTYPING APPLICATION ADVANCES
4.20 Revealing The State Of The Art In 3D Printing For
Advanced Rapid Prototyping – How Far Can Rapid
Prototyping Technologies Be Pushed?
• Showcasing new technologies and innovations for rapid
prototyping: What are the capabilities of the new machines?
• Highlighting opportunities for new rapid prototyping
processes and technologies for small-scale production
with RP technologies
• Comparingthecapabilitiesofrapidprototyping3Dprinting
technologieswithindustrialadditivemanufacturingtechnologies:
Whichapplicationsarebettersuitedtowhichtechnologies?
• Assessing the potential for the use of rapid prototyping
modelling technologies across industries: Can 3D-printed
models replace CGI?
Ralf Schwenger, R&D Director, HEAD Sports
4.50 Question & Answer Session
MASS MARKET APPLICATION: STANDARDS &
CERTIFICATION PANEL DISCUSSION
5.00 Establishing Agreement On Standards And
Certification For 3D-Printed Products To Enable
Widespread Application Across Manufacturing Industries
• Understanding the likelihood of the development of ISO
or ASTM standards to enable mass market adoption of
3D-printed technologies
• Facilitatingcross-industrycooperation:Whatisthecurrent
stateofplayandwhatarethebarrierstopracticalapplication
ofstandardsattherateoftechnologicalinnovation?
• Assessing steps and testing necessary for standards and
certifications for safety-critical components
• Addressing the challenges of limited data availability
on new material properties: What are the prospects for
developing new, international materials databases?
Martin Schaefer, Project Manager & Senior Engineer, Siemens
Sylviane Rogosnisky, Innovation Project Manager - Additive
Manufacturing, Renault
Dr. Jan Sehrt, Head Engineer, Institute of Product Engineering,
University of Duisburg-Essen
Dr. Bernhard Müller, Group Additive Manufacturing Leader,
Fraunhofer IWU
5.30 Question & Answer Session
5.40 Chair’s Closing Remarks
5.50 – 6.50 Networking Drinks Reception In Exhibition
Showcase Area
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
4. Day Two
Wednesday 20th
November, 2013
ADVANCES IN MATERIALS, DESIGN PROCESSES FOR ADDITIVE
MANUFACTURE AND STEPS TOWARDS MASS PRODUCTION
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
8.50 Chair’s Opening Remarks
KEYNOTE: INNOVATIONS IN PRODUCTION-GRADE
MATERIALS DEVELOPMENT
9.00 – 10.20 Understanding The Range Of Materials That
Can Be Printed - What Is Possible Today, And What Will
Be Possible In The Future?
A: METALS FOR ADDITIVE MANUFACTURE
9.00 Showcasing Advances In Alloy Development
And High-Strength Metals – Which Alloys Are
Currently Available To Print And What Are The Latest
Developments In This Area?
• Understanding which metals can be printed today and
capabilities in terms of finish, colours, performance,
mechanical characteristics and temperature resistance
• Highlighting developments in lightweight, industrial-grade
metals for additive manufacture: Where is titanium being
printed today?
• Comparing approaches to metal additive manufacture:
How does SLA compare with SLS in terms of cost, quality
and speed?
• Understanding how the mechanical engineering of the
machines themselves affects metal material properties
Dr. Bernhard Müller, Group Additive Manufacturing Leader,
Fraunhofer IWU
Dr. Konrad Wissenbach, Head of Additive Manufacturing and
Functional Layers, Fraunhofer ILT
9.30 Question & Answer Session
B: PLASTICS FOR ADDITIVE MANUFACTURE
9.40 Exploring Advances In Polymer Development
And Industrial-Grade Plastics – Which Polymers Are
Currently Being Used And What New Possibilities Are
On The Horizon?
• Exploring the prospects for polymers developed with
metallic properties: When will such polymers become
commercially available?
• Examining developments in engineering-grade plastics for
industrial use
• Comparing the mechanical properties of plastics printed
using additive manufacturing techniques and injection
moulding: When will the material properties match up?
• Understanding safety issues relating to printed plastics:
How do the degradation rates differ between production
methods?
Jessica Middlemiss, Senior Materials Engineer, Dyson
10.10 Question & Answer Session
10.20 Morning Refreshments In Exhibition Showcase Area
SCALING UP FOR MASS PRODUCTION
Producing Reliable, Reproducible Products At
High Quality And High Volume
COST RELATIVE TO VOLUME AND SPEED
10.50 Exploring The Capabilities And Costs Of Additive
Manufacturing Technologies For Production – What
Are The Capacities And Volumetric Constraints Of
Existing Machines?
• Understanding current capital cost limitations as a
function of size and fidelity
• Analysing cost implications throughout the lifetime of the
equipment: What should a financial balance sheet look like
to justify investment in the technologies?
• Comparing historic and forecasted changes in the relative
rates of equipment and material costs with production
quality and accuracy
• Assessing equipment capital investment costs and
amortisation over the number of parts produced at
different qualities, quantities and speeds: Where is the
point of diminishing returns?
Prof. Rainer Koch, Head of Department, Mechanical Engineering,
University of Paderborn
11.20 Question & Answer Session
PRODUCT QUALITY: PROCESS CONSISTENCY AND
REPEATABILITY
11.30 Examining Advances In Real-Time Process
Monitoring To Ensure Consistent Quality – How Can
Part-To-Part Variability Be Reduced? How Can We
Ensure The Qualification Of Processes?
• Gauging statistical analyses on part-to-part variability:
How much variation is there and how much can be
tolerated?
• Examining hardware and software solutions for real-time
process monitoring: How can these solutions be interfaced
with certification procedures to enable use with safety-
critical components?
• Identifying the key processes and bottlenecks within
additive manufacturing that impact on product variability
and quality
• Assessing the feasibility of in-situ annealing components
as they are being manufactured
Stephen Morgan, Group Leader - Materials Engineering, Advanced
Technology Division, BAE Systems
12.00 Question & Answer Session
RELIABILITY AND MATERIAL PROPERTIES
12.10 Determining The Properties Of Materials As Parts
Are Being Created: What Are The Effects Of Additive
Manufacturing Processes On Material Properties?
• Understanding how additive manufacturing processes
relate to material properties: How does object orientation
impact on a material’s microstructure?
• Exploring how the material properties of metal
components produced using laser beam melting are
influenced by post-manufacturing processes
• Examining the influence of material ageing on
reproducibility and part properties of laser sintered parts
• Understanding which data to collect and analyse to ensure
an additive manufactured part is of high quality: How
do process parameters affect part quality and
process stability?
Dr. Jan Sehrt, Head Engineer, Institute of Product Engineering,
University of Duisburg-Essen
12.40 Question & Answer Session
12.50 Networking Lunch In Exhibition Showcase Area
DESIGNING FOR ADDITIVE MANUFACTURING
New Geometries, New Possibilities And A New
Way Of Thinking
1.50 – 3.10 Exploring How To Take Advantage Of
Additive Manufacturing As A Design Tool In Order To
Fully Realise Its Capabilities
A: CREATING INTEGRATED FUNCTIONALITY
1.50 Designing In A More Integrated Way To Create
Functionality – How Can You Actually Design The
Material For Purpose And Create Functionality?
• Pinpointing opportunities for integrating manufacturing
and design processes and industry-specific commercial
applications for feature integration
• Identifying hardware and software technology enablers
and integrators to bridge traditional and additive
manufacturing technologies
• Examining advances and remaining limitations in printing
flexible electronics to assess when this functionality will
become a reality: Can an alloy of gallium and indium
practicably be used to print liquid metal? How do you
integrate lighting effects or LEDs with the technique?
• Exploring how to re-educate designers to design according
to biomimetic and bio-inspired design principles
• Understanding the prospects for new CAD software
to process freeform curves and calculate different
topographical opportunities: How effective are current
application-specific design software packages?
Dr. Piers Andrew, Research Leader, Nokia
2.20 Question & Answer Session
B: NEW SHAPES
2.30 Harnessing Additive Manufacturing Processes To
Create Novel Shapes With Real Commercial Value
• Identifying commercial opportunities for new topologies in
different industries: Where does research meet industry?
• Examining practical applications of new shapes to overcome
limitations of traditional manufacturing processes
• Understanding the principles of topology optimisation for
additive manufacturing to design products that cannot be
manufactured in any other way
• Assessing research into new shapes to improve product
functionalities: How can vehicle airflows be improved with
topology optimisation?
Facilitated by: Prof. Scott Hollister, Professor of Biomedical
Engineering and Mechanical Engineering, University of Michigan
3.00 Question & Answer Session
3.10 Afternoon Refreshments In The Exhibition ShowcaseArea
EMERGING MATERIALS AND TECHNOLOGIES
Identifying Commercial Opportunities
For Materials And Technologies
In Development
NEW MATERIAL DESIGN
3.40 Uncovering Advances In Material Design And
Combining Synthetic Materials To Enhance The
Mechanical Properties Of Composites – What Are The
Commercial Opportunities For Industry?
• Understanding the latest developments and possibilities
for creating brand new materials
• Assessing current applications of synthetic, custom-made
materials and their economic implications for additive
manufacturing
• Exploring how design and manufacture processes can be
integrated to create materials with specified properties for
purpose: Can polymeric materials be designed to possess
conductivity properties?
• Identifying future commercial opportunities for
metamaterial development: Which applications will benefit
most from advances in material development?
Prof. Mark Miodownik, Director, Institute of Making, University
College London
4.10 Question & Answer Session
MULTI-FUNCTION AND MULTI-MATERIAL
4.20 Analysing The Commercial Possibilities For Integrating
Separate 3D-Printed Components InASingle Product
• Assessing the prospects for using multi-material additive
manufacture processes to programme different properties
into various parts of a product’s geometry
• Introducing variability in the design process: Revealing
advances in developing multi-material additive
manufacture equipment for commercial application
• Exploring advances in machine technology capable
of self-assembly and disassembly: What are the
prospects for machines able to remove support
structures autonomously?
• Understanding how new components developed using 3D
printers can be bonded with traditionally manufactured
products: What could be done with the next generation
of printers?
Prof. Manos Tentzeris, Professor, School of Electrical and Computer
Engineering, Georgia Institute of Technology
4.50 Question & Answer Session
5.00 Chair’s Closing Remarks
5.10 End Of Summit
5. EXPLORING SOLUTIONS FOR ADDRESSING CHALLENGES AROUND INTELLECTUAL PROPERTY, DATA
SECURITY AND PRODUCT AUTHENTICITY
A number of complex legal and ethical issues are being raised with the arrival of
sophisticated 3D printing and additive manufacturing technologies. But how can
you ensure your company rights are protected and, crucially, that the safety of
your end products has not been compromised?
Join this highly interactive forum which brings together the views of regulatory
authorities, 3D printer manufacturers and industry to debate issues around
safeguarding intellectual property and ensuring product safety and authenticity
Facilitated by: Simon Bradley, VP Global Innovation Network, EADS
Paul Wilkinson, IT Specialist - Research, Tesco
Dr. Jani Kivioja, Research Leader, Nokia Research Centre
MANAGEMENT OF INTELLECTUAL PROPERTY
9.00 Understanding Stakeholder Perspectives For Managing Protection Of Intellectual Property – What Is Currently Being Done To
Protect IP And What Is The Future Strategy?
• Assessing previous digital booms and the challenges faced with piracy: Is something similar going to happen with 3D designs?
• Discussing the legal issues and existing framework to protect the security of digital files: How quickly can international law catch up with technological innovation?
• Analysing the effectiveness of past measures implemented to stop and prevent piracy
• Assessing why the current lack of standards around 3D printing is leading to people incorrectly claiming IP
CYBER SECURITY AND PROTECTING PRODUCT LINES
9.30 Exploring How Best To Secure CAD Data Locally And Internationally – How Can Cyber Security Be Enforced When Data Are
Travelling Through The Cloud?
• Assessing the factors impacting on the security of supply chain models integrating additive manufacturing processes
• Exploring best practices and approaches of ensuring cyber security locally and in the cloud: Where are data most vulnerable to attack in the cloud?
• Discussing approaches for establishing international standards for cyber security
• Identifying innovative approaches to ensure cyber security: How do you stop people from stealing designs and selling them as originals? Are there ways of embedding sensors?
PRODUCT AUTHENTICITY AND SAFETY
10.00 Investigating What Can Be Done To Guarantee Authenticity Of Products As 3D Printing Becomes More Widespread – What
Action Can Be Taken?
• Exploring the feasibility of stamping some level of authentication on the end product so you know it was generated for, and by, the right people
• Examining the effectiveness of existing and proposed methods of ensuring end product authenticity
• Assessing legal compliance issues and their implications for different industries using AM technologies
• Discussing the practicalities of ensuring product authenticity: How can digital files be authenticated while moving through the cloud?
10.45 Question & Answer Discussion
11.30 Open Discussion: Actions Moving Forward To Protect Intellectual Property And Support The Security And Authenticity Of
AM Products
12.00 Workshop Close
INTELLECTUAL PROPERTY
POST-SUMMIT WORKSHOP
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
Thursday 21st
November, 2013 | 9.00am - 12.00pm
Tel: +44 207 709 1000
Fax: +44 207 709 1001
Web: doubletree3.hilton.com
Venue Information:
The Summit will be held at:
DoubleTree by Hilton Hotel London - Tower of London
7 Pepys Street
London
EC3N 4AF
United Kingdom
The workshop on the 21st
November will be held at:
Grange Tower Bridge Hotel
45 Prescot St
London Borough of Tower Hamlets,
E1 8GP
Tel: 44 207 959 5000
Web: www.grangehotels.com
6. Senior Representatives From A Cross Section Of
Manufacturing Industries Including:
• Automotive
• Aerospace
• Defence
• Motorsport
• Electronics
• Chemicals
• Pharmaceuticals
• Sports Equipment
• Medical & Biomedicine
• Consumer Goods
• Telecommunication Equipment
• R&D Institutes
With The Following Job Titles:
• VP, Manufacturing Engineering
• VP, Engineering
• VP, Advanced Manufacturing
• VP, Technology
• VP, Materials
• Director of R&D
• Director of Materials & Manufacturing Advanced
Programs
• Head of Engineering
• Head of Manufacturing Engineering
• Head of Advanced Manufacturing
• Head of Manufacturing Improvements
• Head of Rapid Prototyping
• Senior Manager - Advanced Manufacturing
Engineering
• R&D Director
• Technical Fellow
• CAD Manager
üü Simon Bradley, VP, Global Innovation Network, EADS
üü Stephen Morgan, Group Leader, Advanced Technology Division, BAE Systems
üü Lorenzo Lorenzi, Advanced Manufacturing Leader, GE Oil & Gas
üü Dr. Rainer Rauh, VP, Head of Materials and Processes, EADS
üü Veena Pureswaran, Global Electronics Industry Lead, IBM
üü Curtis Carson, Head of Systems Integration - Manufacturing Engineering,
Airbus
üü Jessica Middlemiss, Senior Materials Engineer, Dyson
üü Richard Brady, Advanced Digital Manufacturing Leader, Williams F1
üü Ralph Schwenger, R&D Director, HEAD Sports
üü Steve Tremlin, Prototyping Manager, Dyson
üü Sylvaine Rogosnisky, Innovation Project Manager - Additive Manufacturing,
Renault
üü Vaibhav Taide, Team Leader - Rapid Prototyping, Scuderia Toro Rosso
üü Martin Schaefer, Project Manager & Senior Engineer, Siemens
üü Paul Wilkinson, IT Specialist - Research, Tesco
üü Dr. Piers Andrew, Research Leader, Nokia
üü Dr. Konrad Wissenbach, Head of Additive Manufacturing and Functional
Layers, Fraunhofer ILT
üü Dr. Bernhard Müller, Group Additive Manufacturing Leader, Fraunhofer
IWU
üü Prof. Mark Miodownik, Director, Institute of Making, University College
London
üü Prof. Manos Tentzeris, School of Electrical and Computer Engineering,
Georgia Institute of Technology
üü Prof. Scott Hollister, Professor of Biomedical Engineering and Mechanical
Engineering, University of Michigan
üü Dr. Jan Sehrt, Head Engineer, Institute of Product Engineering, University
of Duisburg-Essen
üü Rainer Koch, Head of Department, Mechanical Engineering, University
of Paderborn
Full Speaker Faculty:
Sponsorship Opportunities
DEMONSTRATE THOUGHT LEADERSHIP
3D printing and additive manufacturing are among the most talked about
technologies in manufacturing today. You may be pioneering these advances, but do
your customers know what differentiates you from your competitors? Use targeted,
editorially reviewed keynotes and case studies to demonstrate thought-leadership
to your target audience.
RAISE BRAND AWARENESS AND INCREASE YOUR PROFILE
Any solutions selected by manufacturers must be subjected to careful
comparative cost-benefit analysis. Of course, businesses take into account the
profile, credibility and market leadership of potential suppliers to support their
advanced manufacturing strategies. Your organisation must be at the forefront
when these decisions are made. Engage with your audience with targeted
branding and profiling campaigns directed at leading manufacturers.
MEET AND NETWORK WITH DECISION MAKERS
Thought-leadership, branding and profiling are converted into contracts
through extensive face-to-face relationship building. As an industry-focused
event dedicated to the needs of manufacturers, this interactive forum enables
you to meet key decision-makers in one place at one time, giving you the best
possible chance of influencing them.
To secure your booth or discuss
tailor-made sponsorship packages, contact:
Steve Thomas
+44 (0) 208 886 4694 or +44 (0) 800 098 8489
sponsorship@london-business-conferences.co.uk
Achieving Your Marketing And Business Objectives At The Summit: Who You Will Meet?
The 3D Printing & Additive Manufacturing Industrial Applications Summit 2013 offers a truly unique platform for you to deliver
your message, raise awareness and network with industry decision-makers currently using additive manufacturing technologies
as well as those seeking more information before making an investment decision.
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk
7. I would like to register the delegate(s) below for the 2 day conference
3D Printing & Additive Manufacturing Industrial Applications Summit 2013
PYes
Telephone
Address For Invoice Purposes
Zip/Postal Code
Country
Payment must be received in full prior to the event.
* Option 1. CREDIT CARD Please charge my *Visa *American Express *Mastercard
Expiry date
Security Code / CVV (required)
Signature of card holder
Amount £ GBP
Card number
Name on card
Details Please Use Capitals - Photocopy for multiple delegates
Delegate Rates Guests are responsible for their own travel and accomodation arrangements
Payment Please tick appropriate boxes and complete details
How To Finalise Your Registration
* Option 2. INVOICE An invoice containing payment instructions will be sent electronically upon receipt of the completed registration form.
Terms & Conditions
Delegate 1
*Mr *Dr *Miss *Ms *Mrs *Other:
Name
Position
Organisation
Email
Delegate 2
*Mr *Dr *Miss *Ms *Mrs *Other:
Name
Position
Organisation
Email
We have group discounts
So you can involve your whole team
Call for rates: + 44 (0) 800 098 8489
Super Early Booking Discount Early Booking Discount Standard Rate
Book And Pay By Friday 6th
September 2013 Book And Pay By Friday 4th
October 2013 From 5th
October 2013
2 Day Conference Pass +
Workshop
* £1,148 GBP (+VAT) Saving £300 * £1,248 GBP (+VAT) Saving £200 * £1,348 GBP (+VAT)
2 Day Conference Pass * £899 GBP (+VAT) Saving £200 * £999 GBP (+VAT) Saving £100 * £1,099 GBP (+VAT)
Workshop Only * £349 GBP (+VAT)
Now that your details are complete, please send your registration form to
our Customer Service Team using one of the following options:
Option 1. Email: info@london-business-conferences.co.uk
Option 2. Fax: + 44 (0) 845 867 8109
Enquiries And More Information
If you have any questions, or if you would like to request more information please,
contact our friendly Customer Service Team on + 44 (0) 800 098 8489. Or alternatively,
visit the conference website at www.3d-printing-additive-manufacturing.com
Cancellations received 30 days prior to the event
taking place will be eligible for a refund less £75
administration fee, after that point no refund can be
made. Cancellations must be made in writing, if you
are unable to attend you may nominate a colleague to
attend in your place at no additional cost.
London Business Conferences Limited reserves the
right to alter or cancel the speakers or program.
Receipt of this booking form, inclusive or exclusive of
payment constitutes formal agreement to attend and
acceptance of the terms and conditions stated.
All outstanding fees must be paid within our standard
payment period of 7 days. Any outstanding invoices
will remain valid should cancellation of attendance be
received outside of the aforementioned cancellation
period.
*If you are claiming the early booking discount this
may not be used in conjunction with other discounts
advertised elsewhere. All discount codes and offers
must be claimed at the time of registration.
We would like to keep you informed of other London
Business Conferences products and services. This will
be carried out in accordance with the Data Protection
Act. Please write to the Head of Marketing, London
Business Conferences at the address below if you
specifically do not want to receive this information.
London Business Conferences will not accept liability
for any individual transport delays and in such
circumstances the normal cancellation restrictions
apply.
London Business Conferences Limited
First floor 44-46 New Inn Yard | London | EC2A 3EY
Registered in England No. 5090859
www.3d-printing-additive-manufacturing.com + 44 (0) 800 098 8489 info@london-business-conferences.co.uk