1. Kao Saetern
Skill Summary:
• 5+ years experience in a technical and manufacturing environment with hardware and software installation,
troubleshooting skills, reworks, repairs and assembly.
• Experience in with Burn In Ovens and SMT Manufacturing
• Building operating systems such as Windows XP/7/8/10 and Linux.
• Proficient with networking, wired and wireless and network troubleshooting skills.
• Ability to use common machinery, electronics, multi meter, manufacturing tools, soldering and other
equipments.
• IPC-A-610E certified.
• Skilled with using measuring tools such as calipers, micrometers, microscope, and tape measures correctly.
• Ability interprets and read blueprints or schematics.
• Works well without direct supervision and also can performs great as a team player.
• Ability to pick things up very quickly, solve problems, efficient, organized and adaptability in a fast-paced
environment.
• Excellent communication skills in both verbally and written.
• Confident and willingness to learn new procedures and techniques.
Professional Experience:
On Semiconductor 10/2015- Present
Manufacturing Specialist
• Processing 100mm 8inch wafers using automated scheme (FE/BE ASH, WET, FUR, ETH, Surfscan, Optiprobe,
Lieca, and Sorter) in Etch clean room environment.
• Perform weekly schedule Quals and unscheduled Quals for Etch tools.
• Create a CADET (Corrective Action Defect Event Tracking System) in case an ILP (Interrupt Lot Process)
happened or a miss process occur.
• Being able to run high volumes of WIPs and stand for 12 hours of work.
• Performing basic troubleshooting, diagnosis, and repair on workstation tools when it’s down.
• Documenting any unusual defects or problems occur while on the clock and by passing down to the next shift.
Intel (Contract, ICE) 3/2013– 3/2015
Manufacturing Technician
• Operating SMT line in BDL and Validating circuit boards through production floor.
• Being able to distinguish between high volumes of bad/good boards with the help of AOI system.
• Programming AOI (Photodynamic/Vitrox) tools to catch and place all SMT parts that run through the machine
for defects before it pass onto the reflow oven and also perform rework touches if needed.
• Creating data spreadsheet in Excel and documenting the built of material for defects.
• Performing visual inspection for head on pillow, hand probe and make correction to the circuit boards if
needed.
• Use Phoenix x-ray to take images to identify sockets or batches of solder defects such as bridging and imaging
captures solder voids, defect are then save onto data collection network drives.
• Use Javelin Flying prober an automated circuit testing continuity within the requirements to be able to pass.
• Use Aegis/SAP software primary for tracking, fixing, and closing defects. And also, uses work stream to view,
locate and proc in/out of operations.
• Setting up recipes and profile board for Furukawa/Heller reflow oven before and after each builds and perform
weekly SPC calibration.
• Providing Engineering support to resolve specific issues that may occur during the build or running the SMT Line
and help writing updating specs.
• Identifying and documenting defects after the components are pulled from the PCB solder ball, using optical
microscope DTM/CAM in BTAC lab to record data information for engineers.

2. SEH America 4/2011 – 3/2013
Senior Operator
• Processing 300mm silicon wafers using automated scheme (Hard Laser Mark and Etch) in clean room
environment.
• Using SPC methods to identify process issues and implementing in-process routine.
• Trains employees in using equipments, machine, and processing operation procedures.
• Troubleshooting HLM and Etch machine when alarm comes up or machine failure.
• Using Proper PPE equipment when working on hazardous chemical baths, performing SG, Cleaning, and
Supplying to Ager Machines (Dithionite, NaOH).
• Using Microscope to perform daily checks for HLM thickness, scratches, depths, and alignment of the wafers.
• Understanding all safety regulations and must be certified when working on each specific tools, machine.
• Documenting events that may occur during shift and passdown to the following shift.
Intel (Contractor) 6/2009 – 6/2010
Manufacturing Technician:
• Processing 200mm silicon wafers using automated scheme (NES, NVD, NVW, OCR, TG, TSB, DIS, and PHM) in
Thin Films, Novellus clean room environment.
• Being able to distinguish between high volumes of bad/good wafers in the Fab.
• Performing basic troubleshooting, diagnosis, and repair on workstation tools when it’s down.
• Documenting any unusual defects or problems occur while on the clock by passing down to the next shift.
Pacific Star Communication 6/2008 – 3/2009
Validation Technician:
• Installing Windows Operating system into Pacstar products such as 6200 and 6300 Series.
• Must perform and pass manual test on all hardware and software products within given dateline.
• Working with Cisco product such as IP Communicator, firewall, routers and switches.
• Assist in installing IT hardware, including monitors, network infrastructure peripherals and rewiring cables as
required for reconfigurations.
• Manually configure IQCore Software user-friendly platform to allow voice, data, and video communication
system package function able.
• Installing latest updates in hardware and software and make recommendations for modifications.
• Flashing modems into proper setting for customers before shipping out and testing all circuit boards.
• Install computer components according to the BOM and with the help of schematics.
SUN Microsystems Inc 9/2006 – 9/2007
Electronic Assembler:
• Perform mechanical and hardware assembly with the help of schematics and production tools
• Using production software for tracking inventory and data collection, Workstream.
• Assembling, board configuring, cabling and de-kit servers.
• Installing circuit boards, videos, hard drives, memory, and testing Sun’s server.
• Attention to detail is a must.
Intel (Contractor) 6/2004 – 1/2006
PC Technician:
• Installing desktops and laptops, monitors, and systems for Intel employees.
• Imaging Windows operating system onto desktop and laptops.
• Make local delivery and pick-ups for all Intel campuses according per customer request.
• Complete data migration and closed all open tickets at the end of the shift.
Education:
Heald College, Associate Applied Science Degree in Computer Science.
Portland, OR
Graduated: May of 2004.
• Membership in the Phi Theta Kappa Honor Society.
• Achieved Dean’s List 6/6 Quarters.