I have an overall 6.7 years of experience in manufacturing quality. Currently I work with Robert Bosch Chasis India , Pune as Senior Engineer. I have key work experience with OEM-Tata Motors, Pune And XLO India ltd., Nasik. I have used SAP PP/MM module. I have knowledge in production manufacturing processes and expertise in quality control and assurance. I have experience in handling various system audits, customer complaints, use of 7 QC Tools ,8D Report, Problem solving sheet, SPC, 5’S, TPM, TQM. I have strong evaluation, planning, and leadership skills. I consistently present a high-profile, professional demeanor, complemented by a positive, "can-do" attitude. I am both persuasive and capable of developing report and trust, as well as experienced in influencing the attitudes and ideas of others.

1. Mr.Kalpesh P.Bendale
Sai Angan Building, 73/2A/1, Kalewadi,
Tapkir chauk, Pimpri, Pune- 411017
bendalekalpesh1988@gmail.com
8380064160/ 9552566890
To,
Dear HR Manager,
Subject : Application for the post of suitable in your organization .
Dear Sir,
Please accept the enclosed resume as an expression of interest in exploring employment
opportunities with your Organization.
I have overall 6.2 years of experience in manufacturing quality. Currently I work with Robert
Bosch Chasis India , Pune as Senior Engineer. I have key work experience with OEM-Tata Motors,
Pune And XLO India ltd., Nasik.
I have used SAP PP/MM module. I have knowledge in production manufacturing processes and
expertise in quality control and assurance. I have experience in handling various system audits,
customer complaints, use of 7 QC Tools ,8D Report, Problem solving sheet, SPC, 5’S, TPM, TQM.
I have strong evaluation, planning, and leadership skills. I consistently present a high-profile,
professional demeanor, complemented by a positive, "can-do" attitude. I am both persuasive and
capable of developing report and trust, as well as experienced in influencing the attitudes and ideas of
others.
As my ambition is to grow and acquire the highest post and salary in the Industry, for which
I ready to devote myself to the work, to the organization.
Though my resume is detailed and comprehensive, I know well that it cannot fully demonstrate
my character, personality & the ability to work in a team environment; it can be evidenced in a personal
meeting. I would welcome an interviewing opportunity at your convenience. I hope to learn more about
your company's plans and goals, and how I can contribute to its success.
Thank you for your time and consideration. I am certain that I can be a contributing member of
your company.
Sincerely;
Kalpesh P. Bendale

2. CURRICULUM VITAE
JOB CATEROGY Mr.Kalpesh Pradip Bendale
Assistant Manager/ Deputy Manager Sai Angan Building, 73/2A/1,
MANUFACTURING- QUALITY,. Kalewadi,Tapkir chauk, Pimpri—411017
SUPPLIER QUALITY ASSURANCE. bendalekalpesh1988@gmail.com
PROCESS ENGG , SALES 9552566890/8380064160
1. WORK EXPERIENCE: 6.7 Yrs In Manufacturing + Quality Management. (Machine +Assembly)
Current Organization:
1. ROBERT BOSCH INDIA CHASIS LTD., PUNE
Worlds one of biggest group providing total solution not only to automotive sector but caters
Services to all segments of mechanical industries. (Turnover of CHKP plant is around 650 crore/annum)
JOB PROFILE:
As Senior Quality Engineer- (MACHINE SHOP AND ASSEMBLY) - since JUNE 2012
1 Effective use of man power to achieve and maintain total quality.
2 Looking after rejection analysis and rejection control.
3 Strive to achieve goal of zero defects supply, (Customer Satisfaction).
4 Handling Customer complaints, issues and corrective actions.
5 To make plan and take actions by monitoring and preparing more précised data regarding various issues
so as to have assurance and confidence about quality of jobs reaches to customer.
6 Give training to employees for each product and every parameter of the product they are dealing with,
regarding its importance and effect on actual function of product through Q Recovery, OJT, SOP, etc.
7 Daily Rejection analysis to reduce the PPM & Daily process rejection and ultimately IFC.
8 Responsible for Leading CFT of Firewall and Q Recovery activity to come with final firm solution for
the problem occurred.
9 Key member of team updating, reviewing of control plan ,Process flow, Operation charts, FMEA.
10 Responsible for identifying & implementing continual improvement projects.
11 Responsible for effective implementation of QMS.
12 Well known of tools like, 8D, PSS, Quality alerts, CAPA.
13 Responsible for Daily Stage inspections, First off inspections, Maintaining Zero ‘0’km.
14 Prepare Skill metric sheet check sheets, LPA, Process capability studies.
15 Responsible for new product development and its approval at OEM end.
16 Daily MIS reports and presentation to Higher management.
17 Basic training of TPM,TQM, FMEA-IQRM
Major Projects Undertaken at RBIC:
1 Successfully handled relocation project for TPCRV, DPV2, Blend valve lines in m/c and assly shop.
Since start of relocation, installation commission validation for both m/c & assly shop.
2 Key member in development of new valve products.
Milestones achieved at RBIC:
1. Manpower reduction by 35% ultimately leads to cost reduction by effective manpower utilisation.
2. Successful Achievement of last goal KRA in view of reduction and achievement in IFC target.
3. Achieved 50 % lower IFC than specified target line in CY 2014 compared to CY 2013.
4. Successful Achievement of last goal KRA that to reduce Safe launch inspection by 70%.
5. Successful Achievement of goal KRA in view of implementation of 2stage inspections for all products.
6. Successfully achievement of last goal KRA i.e. less than 7 Zero KM claims.

3. 7. Fine regularization in daily Rejection Review activity to reduce PPM.
8. Successful implementation of Retention activity for documents.
9. Successful PPAP for various products like ACE ZIP and IRIS, W105, P409, SAIP TPV, Y9T Models.
10. Successful Participation for MAE release activity of blend valve, export performance test rigs, DPV
11. Successful Participation for MAE release activity of new machine and equipments installations.
12. Successful implementation of QZ test plan for LSPV Lines daily products,
13. Masters Preparations and calibration.
14. Interchangiability of all QC inspectors.
Past Experience:
2. TATA MOTORS LTD., PCBU- PUNE
India’s largest automobile company and 3rd largest car manufacturing company.
As Manufacturing Engineer- Quality Assurance -Vehicle Assembly -May 2010 – MAY-2012
JOB PROFILE:
1. Effective use of man power to achieve and maintain total quality.
2. Daily torque Audits, Process Audits, monitoring of CTQ stations and joints.
3. To prepare planning schedule for calibration of Torque wrenches, transducers, various gauges, dials etc.
4. 5S, ISO, TQM, LPA, systems implementation on line.
5. Use of 7 QC tools.
6. To do Why-why analysis, on line for various issues.
7. Implementation of Poka-yoke, Kaizen, QCOS on line.
8. Cp-cpk measurement of machines,
9. Upkeep quality records of measuring & test equipments,
10. Documentation for ISO, OEE etc
11. Well known of vehicle Dynamics like wheel balancing, Alignment etc.
Major Projects Undertaken at TATA MOTORS:
1. Development, Installation and Commissioning of New Trailing arm conveyor.
2. Functional improvements in Brake disc washing machine
3. Angle Monitoring Project linked with IPMS., D.C.Tool Health Improvement
4. Implementation of contamination free brake assly.
2. XLO INDIA LTD., NASIK-(Aug-09-Feb 10)
As Trainee Engineer - Manufacturing
1 Job setup and training to trainee for machining operations likes Drilling, Broaching, Shaping, Grinding.
2 Preparing and implementing action plans effectively to maximize overall equipment efficiency of
production machines.
3 Distribution of work load to operators in order to achieve daily production target.
4 Supervising hourly production.
5 Arranging, repairing and maintaining tools.
EDUCATIONAL QUALIFICATIONS

4. Examination Board/
University
Marks
Obtained
% Year
M.B.A.OPERATIONS PUNE 1460/2800 SECOND
CLASS
2013-14
B.E.MECH PUNE 938/1500 62.53 2008-09
D.M.E. MSBTE 978/1300 75.23 2005-06
S.S.C. MSBSHSE 537/750 71.60 2002-03
Projects:
• Final year - Tribological behaviors of 25% Carbon filled PTFE dry Journal Bearings.
• Third year: Lightweight Crankshafts:
• Diploma: Automatic half nut release mechanism.
Skills
• Ability to recognize, evaluate and solve problems.
• Excellency in MS Excel, MS Power-point & word
• Excellent communication skills both verbal and written.
Strengths
• Smart, Assertive and highly organized.
• Good presentation and interpersonal communication skill.
• Ambitious, positive attitude and self-initiative.
• Quick Learn & positive attitude, Independency with minimum guidance and Self-TEAM motivated.
• Openness towards learning new skills, & Ability to take new challenges.
Languages Known : English, Hindi, Marathi.
Computer Expertise : SAP –MM/ PP, UGNX-4, PRO-E 5.0, Autocad-2006, D.T.P., TYPING-60 wpm,
Hobbies : Reading books, listening music, net surfing.
PERSONAL DETAILS
1 Father’s name : BENDALE PRADIP BALWANT
2 Date of birth : 2nd JAN 1988. Gender : Male
3 Marital Status : Single Passport ID NO : K1622718
4 Current CTC : 5.7 L/A Expected CTC : As per standards
5 Notice period : 90 days.
I hereby declare that the information furnished above is true to the best of my knowledge.
Place: Yours Faithfully,
Kalpesh P Bendale
9552566890/8380064160