INOVA TeleCAD-GIS 2013

TeleCAD-GIS Overview
February 2014 www.geoinova.com | info@geoinova.com Page 8
-
Contents
TeleCAD-GIS................................................................................................................................................ 9
What is TeleCAD-GIS? ............................................................................................................................. 9
Whom is it for?........................................................................................................................................ 9
TeleCAD-GIS (Standalone)................................................................................................................... 9
TeleCAD-GIS Enterprise (INOVA GIS Platform).................................................................................... 9
Modules ................................................................................................................................................ 10
Basic module ..................................................................................................................................... 10
Raster module ................................................................................................................................... 10
Conduit module................................................................................................................................. 10
Copper module.................................................................................................................................. 10
Fiber Optics module .......................................................................................................................... 11
HFC module ....................................................................................................................................... 11
OTDR module .................................................................................................................................... 11
EMI (Electromagnetic interference calculation) ............................................................................... 11
Features................................................................................................................................................. 12
Overlap resolving............................................................................................................................... 12
Physical and logical structures .......................................................................................................... 12
Automatic Schematic Diagrams ........................................................................................................ 12
Analyze, edit and print infrastructure using Schematic Diagrams.................................................... 13
Single source...................................................................................................................................... 13
Project Manager................................................................................................................................ 13
Generating reports............................................................................................................................ 13
Arranging labels................................................................................................................................. 13
Prepress............................................................................................................................................. 13
TeleCAD-GIS Screenshots...................................................................................................................... 14

TeleCAD-GIS
What is TeleCAD-GIS?
TeleCAD-GIS is a software application for planning, designing, analyzing, documenting and maintaining
telecommunications infrastructure. It uses AutoCAD (or AutoCAD MAP) as an underlying platform.
TeleCAD-GIS is a flagship product of INOVA.
Whom is it for?
TeleCAD-GIS can be used as:
standalone application or
as a part of much wider system - INOVA GIS Platform.
TeleCAD-GIS (Standalone)
In this case TeleCAD-GIS is suitable for all those business subjects that don t have the need for keeping
their data in a centralized GIS database. These include design companies, telecom subcontractors,
smaller companies, freelance engineers etc.
TeleCAD-GIS Enterprise (INOVA GIS Platform)
When used as a part of INOVA GIS Platform, TeleCAD-GIS becomes TeleCAD-GIS Enterprise. Now it can
be used to maintain, view and analyze complex telecommunications networks. Multiple concurrent
users can edit data at the same time, collaborate on projects, exchange project related data etc. All
this makes it perfect for companies that own OSP/ISP facilities, making maintenance, analysis and
presenting of such data very efficient.
(INOVA GIS Platform is described in more details in the document called INOVA GIS Platform .)

Modules
TeleCAD-GIS is modular. This makes it affordable for various types of our clients ranging from small
design bureaus to large scale multinational companies. Purchase only those modules that are
necessary for your specific needs.
TeleCAD-GIS comprises following modules:
1. Basic modules (required)
a. Route module
b. Project management module
c. Prepress module
d. General tools module
e. Reports
2. Raster module (optional)
3. Conduit module (optional)
4. Copper module (optional)
5. Fiber Optics module (optional)
6. Coaxial module (optional)
7. EMI (optional /also available as a standalone application)
8. OTDR module (optional / also available as a standalone application)
Basic module
Basic module includes: pathway, project management, prepress and general tools module
accompanied by various basic functions required to run these and other modules (e.g. drawing tools,
layers management, automatic numbering of network elements ).
Raster module
Raster module is used for cartographic material processing (calibration and geo-referencing) and work
with raster images in general.
It includes algorithms (tools) for removal of the distortions that occur during the scanning process of
paper documentation or distortions that are consequence of storing conditions.
Conduit module
Conduit module is used to design, document, analyze and maintain telecommunications conduit
network. It supports representation of network elements such as: duct bank, conduit, inner ducts,
sheeting ducts manholes etc. Cables and ducts are pulled through larger size ducts using intuitive GUI
of manhole butterfly diagram and/or trench cross section diagram. Manhole butterfly diagram is also
used to arrange infrastructure elements on the walls of a manhole. Schematic diagram of conduit
network enables analysis, filtering and routing.
Copper module
Copper module is used to design, document, analyze and maintain network of telecommunications
copper cables. It supports representation of network elements such as: exchange, cables, splice points,
slack loops, termination points, NIDs, public telephones, utility poles etc. Some of the automated tools

included in this module are: network optimization (optimization of: cable capacity, splice case type ),
splicing tools (manual and automatic splicing), topology analyzer etc.
Fiber Optics module
Fiber Optics module is used to design, document, analyze and maintain fiber optic telecommunications
networks. It supports presentation of network elements such as: distribution frames, splice points,
slack loops, fiber optical cables (down to each individual fiber) etc. Fiber optic network can be viewed,
analyzed, filtered and edited using automatically generated schematic diagram. Module also
implements Intuitive GUI for editing, modeling and splicing node elements (ODF,
HFC module
Tools for working with HFC (Hybrid fiber-coaxial) infrastructure.
OTDR module
Using this module, results of OTDR (Optical time-domain reflectometer) measurements are processed
and location of the outage is displayed on the map. OTDR module can be integrated with RFTS
monitoring (Remote Fiber Test System).
EMI (Electromagnetic interference calculation)
Module for calculation of electromagnetic impact of high power lines and railway electric traction
facilities on copper cables telecommunications lines.

Features
Some of the TeleCAD-GIS main features are:
Overlap resolving
Infrastructure on the map and on the situation plan (DWG drawing) is shown accurately, as it is
positioned in the real world. On the other hand it can also be automatically shown in resolve
overlapping mode. In this case linear infrastructure is shown parallel, side by side making it more
readable. When the GIS database is viewed in overlapping mode, overlapping is performed in real
time.
Fig. 1 - Normal mode versus resolve overlapping mode (performed in real time).
Physical and logical structures
TeleCAD-GIS combines presentation of both physical and logical structures.
Automatic Schematic Diagrams
Automatic creation of schematic diagrams both Conduit and Fiber-Optics Network. Works well even
for diagrams with large number of elements. Additionally, diagrams can be arranged manually.
Fig. 2 - also printable).

Analyze, edit and print infrastructure using Schematic Diagrams
Schematic Diagram is not just a diagram. Infrastructure can be analyzed and edited directly
on a diagram. Double click opens termination point or splice point for further editing. Diagrams and
Map or Situation plan are fully synchronized. Different views of Schematic Diagram can easily be
prepared for print.
Single source
Designing, editing, analyzing, maintenance and documenting (preparing for print) is single sourced.
Documentation is no longer scattered in different types of files (Word, Visio, DWG, Excel, paper
GIS database while different types of documentation
are generated on demand.
Project Manager
Project manager enables centralized organizing of all documents in stage of planning or designing.
When it comes to documentation, it enables insight in history of changes (e.g. problems, notes,
creation until final acceptance into the GIS database.
Generating reports
Generate reports automatically. Various reports can be generated automatically.
Arranging labels
Labels are arranged automatically in such manner that they are always clearly visible (no overlapping).
If some of the labels are arranged by the user their position will not be altered during automatic
arranging.
Prepress
Within a single TeleCAD-GIS project (DWG document) you can generate following layouts for print:
1. Detailed schematic view of distribution frame (with fiber connections)
2. Detailed view of splicing within splice point
3. Manhole butterfly diagram
4. Trench cross section
5. Situation plan for different types of infrastructure (conduit, copper, fiber optic or all together).
6. Multiple sheets can be generated automatically.
7. Schematic diagram of fibers (as previously stated)
8. Schematic diagram of conduit network (as previously stated)
9.

TeleCAD-GIS Screenshots
Automatically generated sheets (type 1):
Automatically generated sheets (type 2):

Detailed Schematic Diagram of ODF
(available cables on the left, ODF ports on the right; used for editing, printable):

Schematic Diagram of splice point with splicing detail (used for editing, printable):

Schematic diagram of conduit network (used for editing, printable):

Manhole butterfly diagram (used for editing, printable):

INOVA TeleCAD-GIS 2013

INOVA TeleCAD-GIS 2013

INOVA TeleCAD-GIS 2013

Recommandé

Contenu connexe

En vedette

En vedette(6)

Similaire à INOVA TeleCAD-GIS 2013

Similaire à INOVA TeleCAD-GIS 2013(20)

Plus de Maksim Sestic

Plus de Maksim Sestic(20)

Dernier

Dernier(20)

INOVA TeleCAD-GIS 2013