We begin with evaluation of the Glass Build as an Engineering Process of Synthesis in Architectural Design in ARK Mode. Now we examine the Economic Change as we position the product in the market by determining what engineering requirements are first and develop a Theoretical Production to develop pricing and costing of the project. We begin to study the constraints of Remote Building with Media Modeling using Pipes and Conduits and to define the Parametric Test for bounds of the Model we constructed.
3. 1. Use filler instead of density and grow
the beam at the site, transport via glass
2. Add menus and switches
3. Facade style changes
Glass Mechanics for Remote Building Glass Model for Remote Building
1. Concept machine as approved by
engineering is acceptable with proprietary
secants and encrypted as Intellectual
Property (fingerprint.)
2. Remote capability is subject to general
development of Ark Media and may depend
on timing of it (limited by glass conduit.)
Economic Value is a stable fact in Glass, since the Glass System can not be subject to 1.
availability of product supply or demand 2. the volatility of markets 3. a currency valuation
4. Technological obsolescence is held at bay by causing the build method to be based on
the lower constructs until the product is refined and replaced automatically; Most
importantly the longevity (long-lived nature) and continuity of the product is ensured by
the Plan of God 5. Economy of scale is increased by the plait and scalable nature of glass.
To Do:
Devise a Theoretical
Production and simulate the
remote process prior to the
availability of an ark media
Assume pipe and
plait concepts
assimilated in Ark
Redefine
the Load
Engineering
Plan from
“The Glass
House”
9/30/2021
Brij Consulting, LLC, Jean Marshall 3
Project Plan is stated at its Market Value
Concepts of…
4. Facts added to Glass Mechanics
1. Use filler instead of density and grow
the beam at the site, transport via glass
2. Add menus and switches 3. Facade style changes
DENSITY FUNCTION
•NOT Replication
•Secant Guided Process sponsored by a Tool
•When filler is used as a replacement for the density
function until transport, the filler assumes the
characteristics of the density requirement per its
confected production at Z
Menus and
Switches
•Used to unlock and
move beams until parked
and locked.
•Beams can not be put
back to plait media state
•Menus can be used for
repair and rebalancing
Façade Style
changes
•Added into the fill
pocket of the beam
•Produced with a Machine
tool
•Once the Façade is
added can be repaired
but not replaced
Is there on-site access to tools and
production capability-see limitations?
See Additional Facts for Menus and Facades
9/30/2021
Brij Consulting, LLC, Jean Marshall 4
5. Storyboard
◦ Theoretical Production
needs to be devised to
take advantage of each
step in the process
◦ We’re doing this to
construct the Value of
each Revision and have
some run rate for the
project
R-P1
Hedge Measures
t/b/d= to be
determined
9/30/2021
Brij Consulting, LLC, Jean Marshall 5
SEC SERIAL 3.11936464647272 Appendix II
6. Engineering Changes
Increasing units of Production impacts
growth and yield with economic change
x2
Valuation
Measures inclusive
Adding Change Value to the Project altered the
relevant range of the Standards
Slide 5 correlation
How do these
changes appear
in the Plan?
9/30/2021
Brij Consulting, LLC, Jean Marshall 6
reloaded
7. ◦ 7W P1 Theoretical Production for Storyboard R-P1-RC, includes Product Media to approximate remote cost
The greater part of the 4% increase is coming
from supporting industry, only .48% is
Architectural
Used to
develop
the price
α
9/30/2021
Brij Consulting, LLC, Jean Marshall 7
m
8. Developing the
Theoretical Production
The Theoretical Production for the P-1
Architecture is shown as calculated next…
Uses the Y-Intercept set
α
9/30/2021
Brij Consulting, LLC, Jean Marshall 8
Slide 10
See How to Resolve this Calculation in Appendix I
α
9. ◦ 7W P1 Theoretical Production for Storyboard R-P1-IH, exclusive of Product Media to approximate inhouse cost
Per slide 8
9/30/2021
Brij Consulting, LLC, Jean Marshall 9
α
m
10. Additional Facts for
Menus and
Facades
◦ Menus and Switches (Modules)
◦ Two Types
◦ Vendor Only or
◦ Customer Facing
◦ Types
◦ Customer: color change and specific motionable properties
without impairment of structural supports
◦ Specifications: somewhat similar to the digital mechanic in
that the placement within the product affects its final operation
upon final assembly (must be well-defined and tested.)
◦ Color changes and repairs to facades/ building surfaces are
capable through modules within the Glass system and altered
remotely
Discussed in “The Glass Build”
9/30/2021
Brij Consulting, LLC, Jean Marshall 10
11. V2 Ark Conduit mimics Site Simulation
In this Section…
◦ Pipes and Plaits have similar functions in ARK MODE although scale is quite different than digital
◦ We will introduce Pipes and Plaits and continue to work on the theory of
secant development, with new and better tools in the offing.
◦ In V3 we will also begin to define the parametric order of operations
9/30/2021
Brij Consulting, LLC, Jean Marshall 11
May God bless you and keep you and make His
Face to shine upon you and give you peace.
12. REMIX RATES
Brij Consulting, LLC, Jean Marshall 9/30/2021 12
@ e of 604, Value added = 504, burden 1.576
Beats
Time and
Motion
Difficult to show, alteration of one decimal place moves
to secant center of wheel
13. Compiling Pipe Conduit Configuration
10/2/2021
Brij Consulting, LLC, Jean Marshall 13
The Ark Pipe
compiles a huge
amount of data and
property
configurations in line
with the drawings
and the tooling
submissions
Conduit
feeds the
pipe with the
properties/
glass objects
Glass Media
We will use this in our Next Paper
14. V2:Define Test of
Parametric
In the next section we will
◦ Define probability testing of parametric equations to
devise bounds
◦ Devise a Template for updating the various rates and
conditions
◦ The Order of Operations is demonstrated.
Brij Consulting, LLC, Jean Marshall 10/2/2021 14
Next…
P1
15. Parametric Testing with Blackjack
10/2/2021
Brij Consulting, LLC, Jean Marshall 15
Using a reverse crossover
table and some testing of
variables in our rate table
we will determine when to
change the standards and
apply a new template to
the Theoretical Production
that we have devised.
We consider this a form of
Monte Carlo Analysis
using three cards for three
variables
Method to be constructed
Range
Outcomes
M=4
N=3
Both
16. Examine the Given
◦ A complete and fully
tested data set is married
into the ark pipe
composite graph
showing two equations
that represent the whole
structure. If anything
causes a change in this
structure, then it may
warrant a change in the
data plan.
10/1/2021
Brij Consulting, LLC, Jean Marshall 16
18. Test M Data (Price Fall)
◦ We pushed a Price
Decrease through
the ‘P1 Only’
Theoretical
Production and
tested the impact
and adjusted the
data set.
10/2/2021
Brij Consulting, LLC, Jean Marshall 18
Test Pass
A test pass is given because the
rate split shows a y intercept
4
See Test History Appendix III
19. Test N Data (Price Increase)
◦ We pushed a Price
Increase through the
‘P1 Only’ Theoretical
Production and
tested the impact
and adjusted the
data set.
10/2/2021
Brij Consulting, LLC, Jean Marshall 19
Test Fail
A test fail is given because the rate
split shows a rate increase, thus an
impact on rates requires a new
rate structure
3
See Test History Appendix III
20. Increase in
Mix Price
◦ Hypothetically we
added an increase due
to Glass Mix increasing
the Price. We had to
decide if it would
change our rates and
decided that it is a
factor in our quotations.
◦ We ran statistical
observations to
determine if our pass-
fail test was accurate.
◦ We could see that the
new Product (n) was
impacting our rates.
10/2/2021 Brij Consulting, LLC, Jean Marshall 20
Price increases = N
See Appendix II
Statistical Crossover Analysis
The cost of the glass mix is
spread across multiple units
21. The Gospel of Luke
Two years afterwards, in the year forty–eight and of the Virgin the sixty–third,
saint Luke wrote his Gospel in the Greek language. To him also, as to the
others, Mary appeared when he was about to begin it. Having represented to
the heavenly Mother, that, in order manifest the Incarnation and life of her
divine Son, it was necessary to touch upon the manner of the conception of
the Word made man and upon other things concerning her dignity as the
natural Mother of Christ, and having received orders from Her to pass over in
silence the other mysteries and wonders connected with her dignity as
Mother of God, saint Luke obtained her permission to write somewhat more
freely of the heavenly Mary in his Gospel. The holy Ghost descended upon
him and in the presence of the great Queen he began to write his Gospel,
drawing his information principally from direct inspiration of her Majesty.
Saint Luke continued a most devoted servant of the Lady and permitted the
image of the sweetest Mother seated on the throne of majesty, as he had
seen Her on this occasion, to be effaced from his mind. Thenceforward he
lived continually in her presence. Saint Luke was in Achaia, when this
apparition happened to him, and there also he wrote his Gospel. The
Mystical City of God
Brij Consulting, LLC, Jean Marshall 10/1/2021 21
One of the seventy-two disciples found with St.
Paul in the Book of Acts, also written by Luke
St. Luke wrote the first Icon
22. How to resolve Theoretical Production
9/30/2021
Brij Consulting, LLC, Jean Marshall 22
1
2
3
4
5 a
b
6
Steps
1. Write the economic conversion statement
2. Graph the conversion of step 1 and solve
the m+b+r^2 = Y
3. Graph this result, and create the swim
chart, then depict within Test as Z.
4. Graph the z column as the thruput for
graph 5
5. Calculate the facts for the production
calculation in yellow [thruput and vector]
6. Perform the work for the Theoretical
Production Worksheet which must be
balanced
Slide 10
Writing the economic conversion statement is
required to align the two different build methods
Appendix I
This process requires the production to be reworked and remixed when changes warrant a
revision to standard rates, until all of the machines and tooling are in place
a
b
Margin correlation
on slide 6
α
m
The need to level the various
build methods with an ECS is
difficult to depict (Economic
Conversion Statement)
ECS
23. Appendix II
◦ Statistical Crossover
Analysis
9/30/2021
Brij Consulting, LLC, Jean Marshall 23
m
Secants do the work
of glass mechanics
contributing their own
metric relationships
24. Test History
◦ We devised a parametric
test of the data in order to
determine if the change in
the data set warranted a
change in the rate structure
◦ See Slides 18 and 19 for
Test Results
10/2/2021
Brij Consulting, LLC, Jean Marshall 24
N=3
M=4
Appendix III
x4 x3
/2
/2
/3x2
/3x2
Price falls= M Price increases = N
Related to changes in the Glass Mix
25. Synthesis
◦ The action of performing an additional operation on our
confected cement beam from its base is something like
injection molding putting additional plait glass materials to
work to develop marble in the façade of the column, beam
or table/base
Brij Consulting, LLC, Jean Marshall 9/30/2021 25
GLASS Mix
Secants
Secants
Marker
Utility
Tooling
The means to create density in scalable function is not discussed
here
Manifold 1W device
Appendix IV
MM-ENG-CONCEPT-1..4
26. TOOLING SET
Developer Matrix for Tooling and Tree
9/30/2021 Brij Consulting, LLC Jean Marshall 26
Switch
CNC DRILL HEAD
Not Load, Insertion,
Force, Torque
configured = LIFT
Secant
Layers
Appendix V
MM-CNC-T51
27. What is Required
Architectural Plans, Digital Glass Model
The Glass Modeling System, Ark Mode
3- Dimensional Media Model
Storyboards to describe…
Process Plan
Integral Materials
Organization of Instances of
Building (Preludes)
Secant Construction and Engineering
Building Organization for Ark Mode
Methods, Tools and Utilities
The Design of
the whole
process will be
an extended
period of
listening about
this subject. But
we will spend
our time in our
next paper
organizing
Secant
Processes
Monks of Norcia - Donations - EN - Monastero di San Benedetto in Monte (nursia.org)
27
9/30/2021
Brij Consulting, LLC, Jean Marshall
28. Our papers
28
This paper is THE REMOTE BUILD
V3 and V4
holds all
contents
1. Portfolio Wheels: Study of Secants and Wheels in the Dynamic requirement for
Media to write and produce in Ark Science and Dimensional Systems, Introduction
of the Story “Eru finds a Golden Pen.”
2. Ark Media: The Dialogue of the Story and the Construction of Storyboards, Mix and
Remix specifications, beginning crosswalk and encryptions
3. Builds and Simulations: Discuss Matrix Trees, Migratory Patterns and the use
of Secants to Build tooling
4. The Corner of Mu Sic: an update of our Digital Paper on Mu Sic to include
Ark encryptions and design considerations
5. THE GLASS HOUSE: Magi and Marcus Engineering plans to invest in a Plait
Glass facility for building and research in remote Ark Science. Start of
Tooling and Secant Design for the Construction Industry
https://www.slideshare.net/Marshallja/presentations
See next slide for list of the preceding
Digital Plait content
9/30/2021
Brij Consulting, LLC, Jean Marshall
Planning a Theoretical Production for untried Architecture
29. 29
1. Ark in Glass: Changing the Schema for Ark Mode crossover, beginning study of Secants
and Wheels for the “cube-ified glass” engineering of Imaging, sound and motion
characteristics.
2. The New Stone: Simulations and Re-instancing to package, confect and view glass media
3. Dimensional Building: Dimensional Arrays, Z strength, Product Media, Interdimensional
Matrices.
4. The Dynamic Instance: Product Media Discussed
5. The Glass Build: Base Build and Modules Assembled, considering impact of dimensional
systems
6. Glass in the Making: Costing and Loading, Assembly and Assimilation, IP Defined, Logos
7. Art of the Science: What can be made? Assimilation discussed, look at basic product
ideas
8. Digital Glass Production: Pipe Transit and RIK Declare, Batch Appliance (Dialogue paper)
9. Imposition of Value Engineering: Establishing and Justifying the Load for Pipe Transit
10. The Digital Plait Position: Engineering Design of the Load and Thruput
11. ^Mu Sic in the Advancing Age: Use of Fingerprint and Encryption for Operational Loads
12. Engineering Objects: The Purpose of this Paper is to Consider the means to raise up a
Digital Portal Production System using appliances gained through Plait Object and Gate
driven configurations that work with Digital Mechanics. Six-Layer Glass and Appliances
13. Instancing at the Gate: Use of Gates and Instances, bridging of the engineering process
14. Interpolative Scope: Use of a Demand and Production Scope for building and delivery of
product, learning to specify material, looking for union of Vector
15. Functional Glass: Fitness for Function and Moral Intelligence, Bayesian Analysis
16. The Glass Wall: This is a very difficult staging of advanced engineering to depict …Motivated
by sound it creates a means by sound to cascade light for safe and wireless power
17. The Glass Wave: Learning to Plait Gates, Reconcile Metrics to Scorecard, and load value of Scrum
18. Scrum Costing w/notes (Book It Daniel): establishing scrum standards (Dialogue paper)
19. Gate Plait Green (Mark It Mark): first scalable plait arrangement overcomes bottleneck
(Dialogue paper)
20. Scorecard Integration (Map It Ralph): A review of mappings to date, marking old vs. new
(Dialogue paper)
^Mu Sic, see The Corner of Mu Sic
To Change
Digital Plait Papers with Content
Description (Reverse Order)
9/30/2021
Brij Consulting, LLC, Jean Marshall