This document provides information on Mirakote 340-1AB, a two component water based epoxy floor coating. It protects concrete from moisture, stains, grease and cracks while providing a seamless, impervious surface. The system includes a primer coat and two finish coats. Product data and application instructions are provided for the primer and finish coats. Calculations demonstrate how to determine material quantities needed for a given floor area.
2. Benefits
Protection the underlying concrete from moisture, stain, grease and
cracks.
Protection of concrete or any substrates that are subjected to mild
chemical attack.
Seamless and impervious. Prevention of dirt and bacteria from
settling on the floor.
By addition of quartz sand, it can be an anti-skid floor.
Improve the visibility. Making your workers and visitors feel safe.
Maintenance easier.
Zero VOC (Volatile Organic Compound).
DIY (Do-It-Yourself) Epoxy floor coating.
4. Product Data Sheet
Water Base Primer 5145AB
Coverage: 3.0 m2/kg for single coat
Mixing ratio (pbw) = 100 : 50
Standard packing = 7.50 kg/set (A = 5.0kg, B = 2.5kg)
Color = Brownish
Pot life = 20 – 30 minutes
5. Product Data Sheet
Water Base Epoxy Mirakote 340-1AB
Coverage = 2.0 m2/kg for two coats
Mixing ratio (pbw) = 100 : 20
Standard Packing = 20.0 kg/set (A = 16.7kg, B = 3.3kg)
Color = Various
Finishing = Matt
Touch dry = 90 – 120 minutes
6. Basic Calculation
Quantity of Primer 5145AB :
Example: 1,000 meter squares
Primer 5145AB required = 1,000 m2 ÷ 3.0 m2/kg
= 333.3 kg
+ 10% of wastage = 366.7 kg
Standard packing size of Primer 5145AB is 7.5kg/set. Thus,
approximately 49 sets of primer 5145AB is required.
7. Basic Calculation
Quantity of Mirakote 340-1AB :
Example: 1,000 meter squares
Mirakote 340-1AB required = 1,000 m2 ÷ 2.0 m2/kg
= 500.0 kg
+ 10% of wastage = 550.0 kg
Standard packing size of Mirakote 340-1AB is 20.0kg/set. Thus,
approximately 28 sets of Mirakote 340-1AB is required.
9. Application
Surface condition: must be sound and free of oil, any kind of
contamination and no water ponding.
Surface Preparation
Repair the existing loose substrate, hairline cracks and potholes. Grind
or light sanding if possible. Vacuuming and clean the dust.
Apply a layer of epoxy primer 5145AB. Allow it to cure overnight.
Apply at least two coats of Mirakote 340-1AB. Allow first coat to cure
overnight. Allow finishing coat to cure at least 24-48 hours to before
opening to light foot traffic.