The document is about how to open the bus bar(wire) for the PDLC film. When you know this process, you will know how to did it well. The PDLC film can turn from opaque to transparent by remote control or switch, you can laminate it into 2 pcs of glass or stick it on the glass, it can achieve the privacy and public space by your own. apply to the shower door, office, exhibition or hotel, interior design.

1. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com
1： Cutting the film with carefully.
Noted the film is smaller than the glass, if your glass is 1000*1000mm,film size
should be 998*998mm. This process will do help to protect the pdlc film.
Please note that the edge of the film should not have the white color, it the white
color appears, it means that the film has separated, you can connect the wire to
check if it can turn transparent.
2: Opening the bus bar
need to cut the film on each side, noted it is not on the same side.
The distance on the between the left and right (bus bar) is about 10Cm.
Use High concentration of alcohol to clean the liquid crystal. Please be sure it is very
clean.

2. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com
3: Silver printing:
use the ink which is putting on the printing board, there is white line on the printing
board, click it and the silver will drop on the side of the film.

3. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com
4. After the silver printing, waiting for the silver totally trying, you can use the dryer
to make it dry fast. And the stick the copper on the film of both sides.

4. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com
4: Soldering the copper net(or red/black high temperature line.(350 Celsius)
5: Finally connecting the power to check it. Please noted the working
voltage of the film is 60/70V, cannot use 220V/110V directly, or it will
burned.!!

5. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com

6. Guangzhou Huichi Glass Technical Co., ltd
Add: Likang Industrial zone, tancun, shitan road, shijing, baiyun district, 510430, Guangzhou.
HP/whatsapp:+86 18922173106/+86 15521047132 Skype: mukial zhang
Website: www.huichiglass.com
Cutter