2. For General Offices, Call Centers, Computer Rooms, etc ...
Panel Core: Wood, Calcium Sulphate, Cementations
Composite. Pedestals are adjustable 10 to 100 CM.
3. Panel Core
Concrete Core
Calcium Sulfate Core
Fiber Core
Pedestals
•Pre-galvanized steel
•Adjustment from 10 to over 100 cm
4. Choosing Criteria
Important criteria when choosing an access
floor system are:
Load bearing capacities
Electrostatic behavior
Fire protection
Hydrothermal requirements
5.
6. Architectural joints covers for:
Pedestrian Floors.
Vehicular Floors.
Interior and Exterior Walls.
Ceilings and Roofs.
Components are made up from extruded
aluminum, synthetic rubber, stainless steel, or brass.
7. Allow the normal expansion
and contraction of the structure.
Support the structure’s physical
imposed and transient loadings.
Form a seal against the ingress of
aggressive media such as: water,
chemicals, biological matter.
Resist the wearing forces of impact,
abrasion and corrosion associated with traffic.
10. Profiles Examples
For floors (for installation
after Screwing)
For covering joints in ceilings, walls
and facades - surface fixing
For precast construction and fair
faced in-situ concrete
(synthetic rubber profile)
15. Hand Rails Material:
VINYL Extruded According to
ASTM D-256-91 & ASTM E-84-81A for flammability & flame spread.
ANSI –A117.1 for pullout & point load
ASTM – 256-906/93A & 93A-00 for impact resistance
ASTM D-543-87 for chemical & stain resistance
Aluminum alloy 6063
Manufactured in accordance with FS-QQ-A-200 9/D
30. They are used to join floors of the same or differing
material and thickness.
The rounded shape also allows the profile to be
used to edge shallow floors max 5 mm thick.