Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.
GESTURE CONTROL ROBOT
USING ACCELEROMETER
BATCH NO:A9
Y.NEEELIMA(11L01A0460)
M.RAJENDRAPRASAD(11L01A0449)
K.VAMSHI(11L0...
AIM:
The main aim of the project is to
control the movements or directions of air
planes, trains and cars by using MEMS
te...
BLOCK DIAGRAM OF RECEIVER MODULE:
POWER
SUPPLY
DECODER
ACTUATOR
(L293D)
MICRO
CONTROLLER
(AT89S52)
RF
RECEIVER
MODULE
CONTENT’S OF THE PROJECT:
TRANSMITTER :
1-ACCELEROMETER
2-COMPARATOR
3-ENCODER(HT12E)
4-RF TRANSMITTER
RECEIVER:
1.RECEIVE...
ENCODER:
ACCELEROMETER:
 It is a kind of sensor
 It can work by giving analog data in
X,Y,Z directions
 X-on pin receive analog ...
COMPARATOR:
RF TRANSMITTER MODULE:
433.92 MHz frequency
Low cost
1.5-12 volts of operation
11 mA currents consuption at
3volts
Sm...
RF RECEVIER MODULE:
• Low cost
• 5 volts operation
• 3.5 mA current drain
• No external parts are required
• Receiver freq...
DECODER:
It is used convert serial data
into parallel which is
received by the RF receiver.
A valid transmission
indicat...
PROCESS:
Hand Movement’s:
ACTUATOR’S(L293D):
APPLICATIONS:
1)MEMS based sensors are a crucial component in
electronics
2)It is used in medical equipment
THANK YOU
Gesture control robot using accelerometer ppt
Prochain SlideShare
Chargement dans…5
×

Gesture control robot using accelerometer ppt

9 706 vues

Publié le

ppt

Publié dans : Ingénierie

Gesture control robot using accelerometer ppt

  1. 1. GESTURE CONTROL ROBOT USING ACCELEROMETER BATCH NO:A9 Y.NEEELIMA(11L01A0460) M.RAJENDRAPRASAD(11L01A0449) K.VAMSHI(11L01A0429)
  2. 2. AIM: The main aim of the project is to control the movements or directions of air planes, trains and cars by using MEMS technology.
  3. 3. BLOCK DIAGRAM OF RECEIVER MODULE: POWER SUPPLY DECODER ACTUATOR (L293D) MICRO CONTROLLER (AT89S52) RF RECEIVER MODULE
  4. 4. CONTENT’S OF THE PROJECT: TRANSMITTER : 1-ACCELEROMETER 2-COMPARATOR 3-ENCODER(HT12E) 4-RF TRANSMITTER RECEIVER: 1.RECEIVER 2.DECODER 3.PROCESS(microcontroller8051) 4.ACTUATOR(motor driver)
  5. 5. ENCODER:
  6. 6. ACCELEROMETER:  It is a kind of sensor  It can work by giving analog data in X,Y,Z directions  X-on pin receive analog data in x- direction  Y-on pin receive analog data in y- direction  Z-on pin receive analog data in z- direction
  7. 7. COMPARATOR:
  8. 8. RF TRANSMITTER MODULE: 433.92 MHz frequency Low cost 1.5-12 volts of operation 11 mA currents consuption at 3volts Small size 4 dB output power at 3 volts
  9. 9. RF RECEVIER MODULE: • Low cost • 5 volts operation • 3.5 mA current drain • No external parts are required • Receiver frequency-433.92 mhz • Typical sensitivity’-105dB • IF frequency 1 MHz
  10. 10. DECODER: It is used convert serial data into parallel which is received by the RF receiver. A valid transmission indicated by a high signal at VT pin
  11. 11. PROCESS:
  12. 12. Hand Movement’s:
  13. 13. ACTUATOR’S(L293D):
  14. 14. APPLICATIONS: 1)MEMS based sensors are a crucial component in electronics 2)It is used in medical equipment
  15. 15. THANK YOU

×