More Related Content
Similar to Presentation of Performance Vision Version 3.3 (20)
More from PerformanceVision (previously SecurActive) (14)
Presentation of Performance Vision Version 3.3
- 4. © SecurActive 2015
OPERATING SYSTEM UPGRADE
Has to be a transparent operation for
most users
Represent a tremendous amount of
internal work
- 5. © SecurActive 2015
UPGRADE OS TO CURRENT STABLE RELEASE
Squeeze Debian
6.0
2011
Wheezy
Debian 7.0
2013
Jessie
Debian 8.0
April 2015
Lenny
Debian 5.0
2009
- 7. © SecurActive 2015
DATA PRESERVED FOR ALMOST ALL USERS
User data is preserved by the upgrade!
Except for:
Old SPV 500 collectors with a single hard disk
- 8. © SecurActive 2015
A SIMPLE TWO-STEPS PROCESS
Upgrade to
3.2.99 version
(ftp)
Restart
Upgrade to
3.3.x version
(http)
Preparatory Stage for all probes
Backup configuration (optional)
Launch migration to 3.3 version
First on each pollers
Then finish with the central collector
1.
2.
- 10. © SecurActive 2015
DOWNLOAD THE UPGRADE FILE
Get the upgrade 3.2.99 upgrade on our partner’s portal:
http://www.securactive.net/en/support
- 11. © SecurActive 2015
MIGRATE PROBES TO PREPARATORY STAGE
Use your favorite FTP client to:
upload the migration package on all your probes
You need:
Probes IPs
Account: ftp
Password: refer to documentation
Wait (can be few minutes) until the update process starts…
- 12. © SecurActive 2015
PREPARATORY STAGE UPGRADE
Wait until the probe reboots automatically
or click on the restart button
The probe will then restart
- 13. © SecurActive 2015
REVIEW THE PROBE LIST
Collector: OK - 3.2.99 (preparatory stage)
Poller: Not Ok
Must be upgraded via FTP before next step
- 14. © SecurActive 2015
UPGRADE POLLERS FIRST TO 3.3
Once all probes are in the 3.2.99 version, start upgrading Pollers to 3.3
Use “Download” button to backup configuration files
Click on “Start Upgrade” to launch the upgrade process to the 3.3
version on each poller
- 16. © SecurActive 2015
POLLER UPGRADE TO 3.3 VERSION: COMPLETED
When the upgrade is completed,
the poller state is: « Done »
- 17. © SecurActive 2015
FINISH 3.3 MIGRATION WITH THE COLLECTOR
Once all pollers are in the 3.3 version,
you can start upgrading the Collector
This page will be unavailable during
the Collector upgrade. It can take more than 15 minutes!
- 20. © SecurActive 2015
SORT BCA BY CRITICALITY
BCA can be sorted by criticality level
BCA with most alerting events are shown first
One Red > Any Oranges
One Orange > Any Greens
- 23. © SecurActive 2015
IMPROVED CUSTOM FILTERS
Examples:
ip=172.*.*.* and protostack='*TDS*' and sql.error.count > 1
http.response.server = 'apache' and vlan = 10 and device > 100
cifs.error.count > 0 and srt > 5ms and protostack = 'IPv6'
icmp.type = 11 and icmp.err.zone.clt = 'Local'
0win.count.clt > 0 and bandw > 1MB and diffserv > 0
Power of customized filters has been more than doubled!
3.2 version: ~ 230 fields
3.3 version: ~ 500 fields
For more information: User Guide > Appendix > Custom
Filters
- 24. © SecurActive 2015
MPLS SUPPORT
The sniffer now natively supports parsing of:
Multiprotocol Label Switching (MPLS) protocol
Activate / Inactivate in the Configuration section
- 25. © SecurActive 2015
BETTER HANDLING OF TCP KEEPALIVES
Better handling of TCP KeepAlive packets
More accurate Server Response Times to reflect
application’s real workload
Impact on SRT / EURT metrics
- 26. © SecurActive 2015
IMPROVED LDAP(S) CONNECTIVITY
Improved LDAP(S) connectivity
Configuration 〉 Settings 〉 Users
Supports non anonymous binding
- 27. © SecurActive 2015
TRANSACTIONAL CHANGES IN PULSAR
System configuration with Pulsar is now transactional
Pulsar 〉 changes
Pulsar 〉 commit
Pulsar 〉 rollback
Prompt warns when there are uncommitted changes
- 28. © SecurActive 2015
VPN WITH PROXY AUTHENTICATION
VPN connectivity now supports Proxy Authentication
Pulsar 〉 config 〉 support
Support access is mandatory for the best service
- 29. © SecurActive 2015
ENABLE/DISABLE SUPPORT ACCESS AT BOOT TIME
Setup support access: manually or at boot time
Pulsar 〉 support start|stop|enable|disable
Support access is mandatory for the best service
- 30. © SecurActive 2015
CHANGE FTP ACCOUNT PASSWORD
Pulsar administrator can change the ftp account password
Pulsar 〉 passwd ftp
Account is used only for new licenses or version updates
- 31. © SecurActive 2015
LIST/RE-ORDER NETWORK INTERFACES
Review and re-order network interfaces
Pulsar 〉 edit_interfaces removed
Pulsar 〉 interfaces List mac address interfaces
Pulsar 〉 config interfaces Reorder interfaces
Pulsar 〉 network Up, down, IPv4, IPv6
- 32. © SecurActive 2015
MONITORING GRAPHS
Monitor Performance Vision’s activity
Configuration 〉 Information 〉 Monitoring Graphs
Helps support team to have best efficiency
demo
- 33. © SecurActive 2015
HTTPS WARNING
For security reasons, HTTP will be disabled in a future release
3.3 should be the last version to accept HTTP connections
Please, use HTTPS instead of HTTP!
- 34. © SecurActive 2015
VERSION 3.3: IMPACTS SUMMARY
Major impacts compared to 3.2:
Full operating system upgrade
Data preserved except on some old SPV 500 collectors
SRT/EURT metrics
Two steps upgrade!
Upgrade to preparatory stage, and then to 3.3
Update should take few minutes per probe
- 37. What’s New
in Version 3.3?
© SecurActive 2015
THANK YOU!
For any Question
sales@securactive.net
support@securactive.net
Follow Us on
@SecurActivePV
www.securactive.net
blog.securactive.net