1. Shamsi Ismayilov
9664 Monarch Ln., Breinigsville, PA, 18031 shamsi.ismayilov@us.abb.com
Experienced in all phases of new product development and technical management from the
conceptual stages to production release. Experienced in designing complex electronics hardware
including digital and analog circuits, as well as FPGAs using VHDL, embedded software, signal
integrity, timing budget, simulation, directing high-speed PCB layout, hardware debug and
testing, EMI/EMC compliance, manufacturability.
CAREER PLAN
Become Electronics Hardware development manager, Engineering manager.
WORK EXPERIENCE
ABB, April 2010 - now
Hardware development Team leader/Manager
• Reverse engineering
• Managing hardware development and support activity:
 Develop and update operating procedures and work Instructions for the: Designing
for Manufacturability; Design for Testability; Design for Reliability; Failure Mode
Effect Analysis; Worst case analyses; Tolerance analyses; hardware development life
cycle methodology (MileStone process).
 Directing and verification of the EMC/EMI/ESD compliance, Environmental,
Mechanical, Safety tests according UL, IEC and ANSI standards for
Electrical/Electronic products.
 Conducting design reviews, not limited to schematics, PCB layout, test procedures,
cost analyzing.
 Organizing a workshops/presentations by the electronics manufacturer vendors.
 Organizing a workshops/presentations by the design tool vendors. In results such
workshop, we implemented not limited to Signal/power integrity simulation tools
from the Mentor graphic.
 Searching, analyzing, creating and protecting intellectual properties.
 Competitor analyses. Reverse engineering.
 Supporting production for the customer issue, resolving EOL issue for the electronics
components. Coordinate engineering activities with purchasing and manufacturing.
 Providing on job trainings for the new hire, for the customer service and production
personal.
 Providing PDA, department meetings, inter department meetings, coordination
meetings with other departments outside USA.
• Technical activities:
 Architecture Design: Evaluate ideas for new products and suggest system concepts
for the implementation of the products. Working closely with the project and product
managers to generate product Technical Requirement Specifications (TRS). TRS

2. includes, not limited to: electrical, software, interface, mechanical, environmental,
EMI/EMC, compliance to UL, ANSI, IEC standards, cost, materials,
manufacturability, testing (including production) requirements.
 Circuit Design: Design Analog/Digital circuits, including microcontrollers and
FPGAs. Worst case, tolerance, reliability, stress, thermal, cost analyses. Material
selection working closely with SCM department. Conducting simulations.
Generating and updating design documentations.
 PCB layout: Directing PCB layout design by 3d party. Conducting Hyperlynx
Signal/Power integrity simulation, signal integrity DRC on the PCB layout files
before going to PCB production. Conducting Design for manufacturability,
testability, thermal, mechanical stress analyses.
 Documentation: Generate/update all design documentations, not limited to: design
technical documents, design description, analyses reports, and production tests
specifications.
 Production: Realizing design and documents to the production.
• Design tools:
Menthor Graphic’s PADS
Menthor Graphic’s Hyperlynx Signal and Power Integrity tools
Menthor Graphic’s Signal Integrity DRC toll
Altera FPGA EDK
Xilinx FPGA EDK
• Product designed:
 Released in to production (see DESIGNED PRODUCTS):
 Integrated Switch Device (ISD) for control of magnetic actuator based
mechanisms
 Universal Power Driver (UPD) to operate re-closers
 Uninterruptible Power Supply (UPS) for control IEDs of the re-closers
 Sensor Input Module (SIM) measures voltage from the power protection
system
 REF615R for retrofitting of the legacy protection relays (Picture 5)
 Released as prototype:
 High Speed Output module
 Spime
Load Control technologies, April 2008 – April 2010
Senior Electronics engineer
• Developed Load measurement portable device for Boeing: developed digital/analog hardware,
switching power supplies, image processing VHDL code, firmware for Bar Code reading
subsystem, which includes camera chip , NTSC/PAL/SECAM to YCbCr video decoder from
Analog devices, ProASIC3 family flash FPGA from Actel, Renesas 32-Bit RISC
Microcontroller SH7211, SRAM and SRAM (see DESIGNED PRODUCTS).
• Developed hardware interface system, with implementing reverse engineering, between Load
measurement device and Atlas-Copco torque device. This system is implemented and running in

3. John-Deer tractor factory (see DESIGNED PRODUCTS).
• JPEG compression device by implementation of Xilinx FPGAs.
• Developing automation system with involving motion control devices from Trio, IMS, and laser
sensors from Banner.
• The PCB layout design support and directing.
• Directing engineering activities.
• Manufacturing support.
L-3 Communications, Aug. 2002 to March 2008
PWC(Prime Wave Communications),Salt Lake City Utah, Houston Texas /
GNC (Global Network Solutions), Bristol, PA, USA,
Senior Hardware/Software design engineer in telecommunications area
• Paticipated of developing embedded software for ISUP.
• Designed embedded software for IVR applications.
• Field support, SS7 implementation, support, testing.
• Paticipated of developing hardware Subscriber line card.
• Designed Radio Subscriber Unit's modem part. Used FPGA Spartan3, ARM9, different DAC
and ADC, FLASH, DRAM, Ethernet PHY.
• Designed Transcoder, that compresses 16 E1 of 64kbit/sec PCM speech channels to 1 E1
tream, and also decompress 1 streams to 16 E1 channels. Used PowerPCs MPC8260, Ethernet
PHYs, Dual port RAM , Different Flash memories, SRAMs, DRAM, TI DSPs
TMS320VC5410, PCM timeslot interchanger switch fabric, E1/T1 Framers, Altera MAX300A
family CPLDs , Altera Cyclone and Acex family FPGAs, PLLs and clock distributers and
others.
• Designed Video compression IP in VHDL by using fast 9/7 Daubechies discrete direct wavelet
transformer (line based).
• Designed very efficient GSM protocol analyzer IP in VHDL.
EXPERTISE AND SKILLS
Enginnering management
Reverse enginnering
Digital circuit design
Analog circuit design
FPGA design by VHDL, Verilog
Hardware design tools:PADS,ORCAD
FPGA design tools:Modelsim, Xilinx ISE/Vivado, Altera Quartus, Actel Libero IDE
Simualtion tools: Mentor HyperLynx, Mentor DRC, OrCad PSPICE
EMC engineering
Signal Integrity engineering
Programming language. C
Microsoft Visual Basic
Microsoft Visual C++
Embedded programming
ANSI/IEC Standarts knowledge

4. Type testing
PCB design and directing
Mechanical design
Production support
Maintenance
Technical documentation
Multilanguage: Azeri, Turkish, Russian, English
EDUCATIONS
Ph.D. of Components and devices computer and control systems.
B.Sc. / M.Sc. in Electronic Engineering.
TRAININGS:
• Maximiaze lidership ability
• EMC for power industry
• Project management
• Management skills development programme
• AXE 10 MSC $ BSC Operation $Maintenance, 2000
• Fundamentals of Solaris 7
• AXE 10 IOG 20 Handling, 2002
• IP Routing and Bridging
• Internal Quality Audits
• ISO9001
PROFESIONAL MEMBERSHIP
IEEE
ESD assosiation
PUBLICATIONS
1. Organization of Speech Control. Published in “ Computer aided control systems in
construction industry”.
2. Hardware & Software complex to automate investigation of multidimensional objects.
Proceedings of Scientific Conference on control systems.
3. The system for recognition of speech signals. Proceedings of Scientific Conference on
control systems.
4. An effective algorithm to construct standard words for speech recognition. Proceedings
of Scientific Conference on control systems.
5. Other 8 publications covering topics such as speech recognition, acoustic diagnostics, and
etc.

5. DESIGNED PRODUCTS