SLIDING & FOLD DOOR

INDEX
• ALUMINIUM PROFILES
• HARDWARE DETAILS
• TECHNICAL DETAILS
• BENEFITS/USAGES OF HARDWARE
• ADVANTAGES OF THE SERIES
• LIMITATIONS OF THE SERIES

FLUSH BOTTOM TRACK
CODE 35102
LEAF OUTWARDS
CODE 55006
LEAF INWARDS
CODE 55004
U COMPENSATION
CODE 45007
TOP TRACK
CODE 45001
SURFACE MOUNTED BOTTOM
CODE 45002

SIDE FRAME
CODE 45003
JAMB
CODE 45014
ENFORCEMENT
CODE 55005
26MM GAP GLAZING BEADS
CODE 94304

HARDWARE DETAILS

HARDWARE DETAILS

HARDWARE DETAILS

TECHNICAL DETAILS

HARDWARE BENEFITS
Locks:-Locks are used to lock the shutter & this will be in Manual Mode with Single Point /
Multi Point Lock & Mortise Lock.
Mullion Cleats:-For better angular joints of the mullions without any impact of the screws
directly on the walls of the shutters. Which provides high strength with respect to angular
joints.
Spring Loaded Corner Cleats:- For better angular joints of the Frame without any impact of
the screws directly on the walls of the frame, which provides high strength with respect to
angular joints.
Butt Hinges :- Frame wing connectors are used to join the corners of outer frame (Tracks)
which ensure the proper alignment of vertical or horizontal sections at the joint of frames.

HARDWARE BENEFITS
Meeting Cap (D40):- Meeting caps are used to cover the flying mullion from the top and bottom sides once
installed.
Friction Hinges:- Friction hinges are used in openable windows where the windows can stand at a single position
when it is open. It stands at one desired position with the help of the provided hinge where there won't be any
movement of windows even with the high external wind pressures. It helps in cleaning the windows on both sides
and is safer than compared with Butt Hinge. Friction hinges come in different sizes from 10inch to 22inches of
(18X2.5mm) & (22X2.5mm). It can be used at side opening/top hung opening. It mainly restricts the window
opening as desired by the operator.
Single Tongue Handle:- Single tongue handle will consider as multi-point lock These locks can be provided
where the shutter height is up to 4 feet as the transmission rod comes up to 1200mm only.
EPDM :- EPDM is a Durable Synthetic Rubber which reduces metal to metal Impact (Friction Losses) which
in turn can say as reduces wear and tear between two metal bodies. Generally these EPDM’s are used in
Interlock Portion, Glass Packing, & Frame and Shutters.

HARDWARE BENEFITS
Double Tongue Handle:- Double tongue handle referred to as multi point lock. These locks
can be provided where the shutter height is up to 8 feet, here we will be using the Locking
rod with the combination of Polyamide Strip which constitutes the multi point locking.
Weather Sealant:- Prevent any seepage of water along any hair-line joints of the shutters and
frames. Weather Sealant can provide thermal and acoustical insulation where we can save
energy on heating & air conditioning. Also used to block the passage of fluids through the
surface or joints or openings in materials.
Transmission Bar:-Transmission bars are used for multi point locking system. It helps in
locking the latch at 2 different points with the help of transition rods.
Rawl Plug :-Beneficial for better gripping of Wood Screws with the help of silicon to fix the
frame.

ADVANTAGES Of 40MM SERIES
• Light Weight Sections of ranging from 1.0 to 1.6mm
Thk.
• Single Point as well as Multi Point Locks can be
provided with single / double tongue handle. Multi Point
comes with 2 Point Locking.
• Transmission rod comes with sizes from 600mm to
1200mm in order to decide on locking point.
• Hardware's compatible with PROWIN section which
increases the efficiency of the windows.
• Mortise locks with one side knob and the other side
with key lock can be provided to doors.
• Double openable with flying mullion provides 100%
opening without any obstruction.

ADVANTAGES Of 40MMSERIES
• Maximum height in windows can go upto 1500mm
Maximum height in doors can go upto 2400mm.
• Assembly of Butt hinges with Friction stay for outside
openable windows developed.
• Friction hinges with dual qty can withstand a weight
load of upto 45 kgs per shutter. If this exceeds we have
Heavy Duty Hinges which can go upto 60 Kgs.
• Friction hinged windows are very easier for cleaning
from both sides & restricts the window opening as
desired by the operator

LIMITATIONSOF 35 MM SERIES
• Maximum shutter size in windows can go up to 600X1500
mm.
• Maximum shutter size in Doors can go up to 1000X2400
mm.
• Maximum glass thickness would be 24mm Thk Either Single
/ Double Glazed.
• Butt Hinges without a stay will be a case of accidents due to
the overflow swing movement of shutters in which the
hinges may tend to collapse.
• Limited to provide the Flymesh shutters with a combination
of inside opening windows.
• Inside opening of windows and doors lack on providing with
add on profile as the clip tends on outer and we need to
have a Z-Shutter section to overcome this.

THANK YOU

27X60MM GUIDE R AIL
SYSTEM

INDEX
• ALUMINIUM PROFILES
• HARDWARE DETAILS
• TECHNICAL DETAILS
• BENEFITS/USAGES OF HARDWARE
• ADVANTAGES OF THE SERIES
• LIMITATIONS OF THE SERIES
• COMBINATION SERIES

ADDON 2 TRACK
WEIGHT KG/M - 1.04
CODE G27A2T
DOUBLE GLASS SHUTTER
WEIGHT KG/M - 0.72
CODE GDS276
ADDON 4 TRACK
WEIGHT KG/M - 2.10
CODE G427GR
KPA D.G HANDLE SHUTTER
KG/M - 1.10
CODE G27KPH
ADDON 3 TRACK
WEIGHT KG/M - 1.55
CODE G27A3T
S.G SHUTTER
KG/M - 0.70
CODE GSS276

DG SLIM INTERLOCK
(NON KPA)
WEIGHT KG/M - 0.515
CODE GIN276
S.G SLIM INTERLOCK
(NON KPA)
WEIGHT KG/M - 0.54 CODE
GINS27
DG INTERLOCK
REINFORCEMENT (KPA)
WEIGHT KG/M - 1.119
CODE GIR276
S.G INTERLOCK
REINFORCEMENT (KPA)
WEIGHT KG/M - 1.14
CODE GIRS27
OUTER FRAME 27*60 (95MM)
WEIGHT KG/M - 1.02
CODE GF2760
NEW FLY MESH SHUTTER
WEIGHT KG/M - 0.58
CODE G27SFS

ADDON RAIL
WEIGHT KG/M - 0.054
CODE G27AOR
12*12 MM TUBE
WEIGHT KG/M - 0.15
CODE H01212
SLIM JALI INTERLOCK
(27 *60 MM SLIM)
WEIGHT KG/M - 0.19
CODE GJN276
OUTER FRAME 25*54 3L
WEIGHT KG/M - 0.66
CODE GF3L25
OUTER FRAME
WEIGHT KG/M - 0.91
CODE GF2L25

HARDWARE DETAILS

HARDWARE DETAILS

TECHNICAL DETAILS

HARDWARE BENEFITS
Concealed Locks:- Concealed Locks are used to lock the shutter & this will be in Manual /
Automatic Mode with Single Point / Multi-Point Lock.
Adjustable Bearings:- Bearings are specially designed to have a proper free movement
sliding fit into the shutter cavities, along with an end-pointed grub screw to restrict their
movement once set into the initial position.
Spring Loaded Corner Cleats:- For better angular joints of the Frame without any impact of
the screws directly on the walls of the frame, which provides high strength with respect to
angular joints.
Frame Wing Connectors :- Frame wing connectors are used to join the corners of outer frame
(Tracks) which ensure the proper alignment of vertical or horizontal sections at the joint of
frames.

HARDWARE BENEFITS
Lock Guide:- Prevents the damage of locks when the shutter gets locked from the receiver.
I.e., It prevents striking of shutter frame with the outer tracks when closed harshly.
Anti Lift Interlock:- Anti lifts are designed to prevent lifting of the shutter once installed,
Either from inside or from outside.
Wool Pile:- It prevents leakage of water and dust and maintains internal temperature. Its
silicon bristles are water-resistant and ensure longer life.
EPDM :- EPDM is a Durable Synthetic Rubber which reduces metal to metal Impact (Friction
Losses) which in turn can say as reduces wear and tear between two metal bodies. Generally
these EPDM’s are used in Interlock Portion, Glass Packing, & Frame and Shutters.

HARDWARE BENEFITS
Anti Capillary Pad:- Anti-capillary pads are provided to prevent water from going away from
the exposed track part to the unexposed part. It will restrict the free flow of water in the
entire width of the track. It also helps in preventing infiltration of air/dust when the window
is in a closed position.
Weather Sealant:- Prevent any seepage of water along any hair-line joints of the shutters and
frames. Weather Sealant can provide thermal and acoustical insulation where we can save
energy on heating & air conditioning. Also used to block the passage of fluids through the
surface or joints or openings in materials.
Shutter Corner Cleat :-For better angular joints of the Frame without any impact of the
screws directly on the walls of the frame, which provides a high strength with respect to
angular joints.

ADVANTAGESOF27 MMSERIES
• Light Weight Sections Ranging from 1.2 to 1.4 gauge.
• Concealed Single Point, as well as Multi Point Locks, can be provided.
• Integrated Fly mesh can be provided.
• Combination of Sliding with fixed portion developed.
• 27mm Regular Series can be used for major high Rise projects where it
can sustain a maximum Wind Pressure of 1.5 KPA.
• Special Drainage (Z-Type) outflow is provided. System available in 2
Track, 3 Track & 4 Track. Provides better sound/heat insulation.
• Handle locks cannot be provided.
• High performance hardware's with better efficiency.
• Maximum height can go Upto 2200mm

LIMITATIONSOF 27MM SERIES
• Maximum shutter size can go up to 1200X2200 mm.
• Maximum glass thickness would be 18mm Thk With
Double Glazed.
• 27mm regular series windows can be installed where
it can suffice a maximum of 1.5 KPA wind pressure.
• Concealed single-point lock, there is no height
restriction but for concealed multi-point lock we need
to provide at least 300 mm space from top & bottom
and also depends on the height of the window. Upon
these we can decide on 3 point / 4 point locking.
• Handle locks are not recommended for this series.

27MM COMBINATIONSERIES
• Woodminium Combination Series are the Special
series developed considering new regulations of
BMC where balconies are not provided.
• It provides maximum window opening with the
safety structure of bottom fix.
• This design reduces the prices incurred for railings
in the balcony.

THANK YOU

40MM WINDOW & DOOR

INDEX
• ALUMINIUM PROFILES
• HARDWARE DETAILS
• TECHNICAL DETAILS
• BENEFITS/USAGES OF HARDWARE
• ADVANTAGES OF THE SERIES
• LIMITATIONS OF THE SERIES

OUTER FRAME
WEIGHT KG/M - 0.545
CODE Z40FRM
FLYING MULLION
WEIGHT KG/M - 0.661
CODE Z40MTG
INVERSION CLIP
WEIGHT KG/M - 0.52
CODE Z400IC
DGS GLASS CLIP (18 & 20 MM )
KG/M - 0.211
CODE Z40DGC
WINDOW SHUTTER MULLION
WEIGHT KG/M - 0.662
CODE Z40OWS
SINGLE GLASS CLIP
KG/M - 0.217
CODE Z40SGC

DOUBLE GLASS CLIP (24 MM)
WEIGHT KG/M - 0.157
CODE Z40DG2
BIG DOOR SHUTTER / MULLION
WEIGHT KG/M - 0.932
CODE Z40BDS
OUTER FRAME KPA
WEIGHT KG/M - 0.717
CODE Z40KPF
6" FLOOR SPRING DOOR BOTTOM
WEIGHT KG/M - 1.747
CODE Z40FDB
DOOR CLIP
WEIGHT KG/M - 0.273
CODE Z40DBC
4" BOTTOM DOOR
WEIGHT KG/M - 1.327
CODE Z40DCB

HARDWARE DETAILS

HARDWARE DETAILS

HARDWARE DETAILS

TECHNICAL DETAILS

HARDWARE BENEFITS
Locks:-Locks are used to lock the shutter & this will be in Manual Mode with Single Point /
Multi Point Lock & Mortise Lock.
Mullion Cleats:-For better angular joints of the mullions without any impact of the screws
directly on the walls of the shutters. Which provides high strength with respect to angular
joints.
Spring Loaded Corner Cleats:- For better angular joints of the Frame without any impact of
the screws directly on the walls of the frame, which provides high strength with respect to
angular joints.
Butt Hinges :- Frame wing connectors are used to join the corners of outer frame (Tracks)
which ensure the proper alignment of vertical or horizontal sections at the joint of frames.

HARDWARE BENEFITS
Meeting Cap (D40):- Meeting caps are used to cover the flying mullion from the top and bottom sides once
installed.
Friction Hinges:- Friction hinges are used in openable windows where the windows can stand at a single position
when it is open. It stands at one desired position with the help of the provided hinge where there won't be any
movement of windows even with the high external wind pressures. It helps in cleaning the windows on both sides
and is safer than compared with Butt Hinge. Friction hinges come in different sizes from 10inch to 22inches of
(18X2.5mm) & (22X2.5mm). It can be used at side opening/top hung opening. It mainly restricts the window
opening as desired by the operator.
Single Tongue Handle:- Single tongue handle will consider as multi-point lock These locks can be provided
where the shutter height is up to 4 feet as the transmission rod comes up to 1200mm only.
EPDM :- EPDM is a Durable Synthetic Rubber which reduces metal to metal Impact (Friction Losses) which
in turn can say as reduces wear and tear between two metal bodies. Generally these EPDM’s are used in
Interlock Portion, Glass Packing, & Frame and Shutters.

HARDWARE BENEFITS
Double Tongue Handle:- Double tongue handle referred to as multi point lock. These locks
can be provided where the shutter height is up to 8 feet, here we will be using the Locking
rod with the combination of Polyamide Strip which constitutes the multi point locking.
Weather Sealant:- Prevent any seepage of water along any hair-line joints of the shutters and
frames. Weather Sealant can provide thermal and acoustical insulation where we can save
energy on heating & air conditioning. Also used to block the passage of fluids through the
surface or joints or openings in materials.
Transmission Bar:-Transmission bars are used for multi point locking system. It helps in
locking the latch at 2 different points with the help of transition rods.
Rawl Plug :-Beneficial for better gripping of Wood Screws with the help of silicon to fix the
frame.

ADVANTAGES Of 40MM SERIES
• Light Weight Sections of ranging from 1.0 to 1.6mm
Thk.
• Single Point as well as Multi Point Locks can be
provided with single / double tongue handle. Multi Point
comes with 2 Point Locking.
• Transmission rod comes with sizes from 600mm to
1200mm in order to decide on locking point.
• Hardware's compatible with PROWIN section which
increases the efficiency of the windows.
• Mortise locks with one side knob and the other side
with key lock can be provided to doors.
• Double openable with flying mullion provides 100%
opening without any obstruction.

ADVANTAGES Of 40MMSERIES
• Maximum height in windows can go upto 1500mm
Maximum height in doors can go upto 2400mm.
• Assembly of Butt hinges with Friction stay for outside
openable windows developed.
• Friction hinges with dual qty can withstand a weight
load of upto 45 kgs per shutter. If this exceeds we have
Heavy Duty Hinges which can go upto 60 Kgs.
• Friction hinged windows are very easier for cleaning
from both sides & restricts the window opening as
desired by the operator

LIMITATIONSOF 35 MM SERIES
• Maximum shutter size in windows can go up to 600X1500
mm.
• Maximum shutter size in Doors can go up to 1000X2400
mm.
• Maximum glass thickness would be 24mm Thk Either Single
/ Double Glazed.
• Butt Hinges without a stay will be a case of accidents due to
the overflow swing movement of shutters in which the
hinges may tend to collapse.
• Limited to provide the Flymesh shutters with a combination
of inside opening windows.
• Inside opening of windows and doors lack on providing with
add on profile as the clip tends on outer and we need to
have a Z-Shutter section to overcome this.

THANK YOU

35X70MM SLIM S.G

INDEX
• ALUMINIUM PROFILES
• HARDWARE DETAILS
• TECHNICAL DETAILS
• BENEFITS/USAGES OF HARDWARE
• ADVANTAGES OF THE SERIES
• LIMITATIONS OF THE SERIES
• COMBINATION SERIES

SHUTTER 18 MM GAP
WEIGHT KG/M - 1.15
CODE GS3572
INTERLOCK
WEIGHT KG/M - 2.55
CODE GI3575
NON RIENFORCE INTERLOCK
KG/M - 0.75
CODE GI35KN
NEW FLY MESH SHUTTER
KG/M - 0.62
CODE G35SFS
KPA REINFORCE INTERLOCK
WEIGHT KG/M - 1.72
CODE GI35KR
ADDON RAIL
KG/M - 0.093
CODE G35AOR

OUTER FRAME 35*75 MM (127 MM)
WEIGHT KG/M - 1.28
CODE GF3575
KPA REINFORCE INTERLOCK
WEIGHT KG/M - 1.14.
CODE GI35K2

HARDWARE DETAILS

HARDWARE DETAILS

HARDWARE DETAILS

TECHNICAL DETAILS

HARDWARE BENEFITS
Locks:-Locks are used to lock the shutter & this will be in Manual / Automatic Mode with
Single Point / Multi Point Lock.
Adjustable Bearings:- Bearings are specially designed to have a proper free movement
sliding fit into the shutter cavities, along with an end-pointed grub screw to restrict their
movement once set into the initial position.
Spring Loaded Corner Cleats:- For better angular joints of the Frame without any impact of
the screws directly on the walls of the frame, which provides high strength with respect to
angular joints.
Frame Wing Connectors :- Frame wing connectors are used to join the corners of outer frame
(Tracks) which ensure the proper alignment of vertical or horizontal sections at the joint of
frames.

HARDWARE BENEFITS
Lock Guide:- Prevents the damage of locks when the shutter gets locked from the receiver.
I.e., It prevents striking of shutter frame with the outer tracks when closed harshly.
Anti Lift Interlock:- Anti lifts are designed to prevent lifting of the shutter once installed,
Either from inside or from outside.
Wool Pile:- It prevents leakage of water and dust and maintains internal temperature. Its
silicon bristles are water-resistant and ensure longer life.
EPDM :- EPDM is a Durable Synthetic Rubber which reduces metal to metal Impact (Friction
Losses) which in turn can say as reduces wear and tear between two metal bodies. Generally
these EPDM’s are used in Interlock Portion, Glass Packing, & Frame and Shutters.

HARDWARE BENEFITS
Anti Capillary Pad:- Anti-capillary pads are provided to prevent water from going away from
the exposed track part to the unexposed part. It will restrict the free flow of water in the
entire width of the track. It also helps in preventing infiltration of air/dust when the window
is in a closed position.
Weather Sealant:- Prevent any seepage of water along any hair-line joints of the shutters and
frames. Weather Sealant can provide thermal and acoustical insulation where we can save
energy on heating & air conditioning. Also used to block the passage of fluids through the
surface or joints or openings in materials.
Shutter Corner Cleat :-For better angular joints of the Frame without any impact of the
screws directly on the walls of the frame, which provides a high strength with respect to
angular joints.

ADVANTAGES Of 35 MM SLIM
SERIES
• Light Weight Sections ranging from 1.4 to 1.6mm Thick.
• Single Point, as well as Multi Point Locks, can be
provided. Multi Point comes with 4-point locking where
depends on the shutter height.
• Fly mesh can be provided with a newly developed Fly
mesh shutter and can be provided inside only.
• Combination of Sliding with fixed portion developed.
• Slim series with reinforcement can be used for major
high-rise projects where it can sustain a maxim. Wind
pressure of 2.5 KPA.
• Special drainage (Z-Type) outflow is provided.
• System available in 2 Track, 3 Track & 4 Track.

ADVANTAGES Of 35 MM SLIM
SERIES
• Special Sliding Transmitter comes with sizes 600mm to
2000mm in order to decide on locking point.
• Provides better sound / heat insulation.
• Reinforced / Slim interlock comes with sleek design
which provide a better vision.
• L Handle locks can be provided.
• Handle locks can be provided.
• Maximum height can go up to 2800mm
• Concealed Single point / Multi point locks can be
provided

LIMITATIONSOF 35 MM SERIES
• Maximum shutter size can go up to 1500X2800 mm.
• Maximum glass thickness would be 22mm Thick Either
Single / Double Glazed.
• 35mm Slim series windows can be installed where it can
suffice a maximum of 2.5 KPA wind pressure by using
Reinforcement Interlock.
• Concealed single-point lock, there is no height restriction
but for concealed multi-point lock we need to provide at
least 300 mm from top & bottom and also depends on the
height of the window. Upon these, we can decide on 3-point
/ 4-point locking.
• By providing handle locks there might be a complaint on the
intersection of the handle with another shutter sash.
• If there is a requirement of Fly mesh then both sides KPA
cannot be provided as it intersects with net shutter.

35MM SLIMCOMBINATIONSERIES
• Woodminium Combination Series are the Special
series developed considering new regulations of
BMC where balconies are not provided.
• It provides maximum window opening with the
safety structure of bottom fix.
• This design reduces the prices incurred for railings
in the balcony.

THANK YOU