Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.

Mba 2

114 vues

Publié le


Publié dans : Formation
  • Soyez le premier à commenter

  • Soyez le premier à aimer ceci

Mba 2

  2. 2. ECONOMICS  The word Economics is derived from the Greek word “OKIOS NEMEIN” meaning household management  Man is a bundle of desires. Goods and services satisfy these wants. But almost all the goods are scares  To produce goods factors of production are needed and these are all scarce  ECONIMICS is the branch of knowledge concerned with the production consumption and transfer of wealth.  Economics – the study of how individuals and societies make decisions about ways to use scarce resources to fulfill wants and needs.
  3. 3. Chapter 1  Introduction to economic analysis.
  4. 4. The Method of Economics  The study of economics is classified into positive and normative economics.  Marshall studied the economics as normative science and Robbins studied economics as positive science .  Positive economics studies economic behavior without making judgments. It describes what exists and how it works.  Normative economics, also called policy economics, analyzes outcomes of economic behavior, evaluates them as good or bad, and may prescribe courses of action.  A positive science is concerned with “what is” and a normative science with “what ought to be”.  Positive economics is objective and fact based, while normative economics is subjective and value based. Positive economic statements do not have to be correct, but they must be able to be tested and proved or disproved. Normative economic statements are opinion based, so they cannot be proved or disproved
  5. 5. The divisions of Economics  Microeconomics is the branch of economics that examines the functioning of individual industries and the behavior of individual decision-making units—that is, business firms and households. It studies the behavior of the consumers, producers and resource owners and there relationship in the market.  Macroeconomics is the branch of economics that examines the economic behavior of aggregates— income, output, employment, and so on—on a national scale. It studies the economic system as a whole .
  6. 6. Examples of microeconomic and macroeconomic concerns Production Prices Income Employment Microeconomics Production/Output in Individual Industries and Businesses How much steel How many offices How many cars Price of Individual Goods and Services Price of medical care Price of gasoline Food prices Apartment rents Distribution of Income and Wealth Wages in the auto industry Minimum wages Executive salaries Poverty Employment by Individual Businesses & Industries Jobs in the steel industry Number of employees in a firm Macroeconomics National Production/Output Total Industrial Output Gross Domestic Product Growth of Output Aggregate Price Level Consumer prices Producer Prices Rate of Inflation National Income Total wages and salaries Total corporate profits Employment and Unemployment in the Economy Total number of jobs Unemployment rate
  7. 7. RELATION BETWEEN MACRO-MICRO ANALYSIS  There is an obvious relationship between microeconomics and macroeconomics, in that aggregate production and consumption levels are the result of choices made by individual households and firms, and some macroeconomic models explicitly make this connection. Most of the economic topics covered on television and in newspapers are of the macroeconomic variety, but it’s important to remember that economics is about more than just trying to figure out when the economy is going to improve and what the Fed is doing with interest rates.
  8. 8. Economic analysis  The study of forces that determine the distribution of scarce resources. Economic analysis provides insight into how markets operate, and offers methods for attempting to predict future market behavior in response to events, trends, and cycles. Economic analysis is also used by governments to determine tax rates and evaluate the financial health of the nation or state.  A systematic approach to determining the optimum use of scarce resources, involving comparison of two or more alternatives in achieving a specific objective under the given assumptions and constraints.  Economic analysis takes into account the opportunity costs of resources employed and attempts to measure in monetary terms the private and social costs and benefits of a project to the community or economy.  Study of economic systems or a study of a production process or an industry to see if it is operating effectively and how much profit it is making
  9. 9. Typical Managerial decisions  Decisions concerning the operation of the firm, such as the choice of firm size, firm growth rates, and employee compensation. Types of decision making 1. Programmed and non programmed decisions: Programmed decisions are those which are normally repetitive in nature and are taken as a routine job and responsibilities. These types of decisions are made by middle level management in accordance with some policies, rules and procedures. They have short term impact. For example: – granting a leave to an employee, purchasing office materials etc. non programmed decisions are non repetitively taken by top executives. They need to collect data and analyze then and forecast the strategic plans. 2. Major and minor decisions: among different decisions some decisions are considerably more important than others and are prioritized. They are called major decisions. For example, replacement of man by machine, diversification of product etc. contrary to that, some of the remaining decisions are considerably less important than others and are not so prioritized. They are minor decisions. For example, store of raw materials etc.
  10. 10. 3. Routine and strategic decisions: Routine decisions are those decisions which are considered as tactical decisions. They are taken frequently to achieve high degree of efficiency in the organizational activities. For example, parking facilities, lighting and canteen etc. strategic decisions are those which are related to lowering the prices of products, changing the product etc. they take more fund and degree of partials. 4. Organizational and personal decision: Organizational decision is taken by top executives. For official purpose. They affect the organizational activities directly. Authority is also delegated. Personal decisions are concerned to an employee. The executives whenever takes the decisions personally that is known as personal decisions 5. Individual and group decisions: When a single employee is involved in decision making it is called individual decision. They are taken by ole proprietor when the problem is of routine nature. On the other hand when the decision is of group taken in a large organization where important and strategic decisions are taken the it is a group decision 6. Policy and operating decisions: Policy decisions are taken by top level management to change the rules, procedures, organizational structure etc and they have a long tern effect. Operational decisions are taken by low level management which have short term effect and which affect the day to day operation of the organization.
  11. 11. Finance manager  A financial manager is responsible for providing financial advice and support to clients and colleagues to enable them to make sound business decisions.  Financial and accounting management deals with managerial activities related to procurement and utilization of fund for business purpose. Its sub areas are as follows:  Some of the functional areas covered in financial management are discussed as such:  1. Determining Financial Needs:  A finance manager is supposed to meet financial needs of the enterprise. For this purpose, he should determine financial needs of the concern. Funds are needed to meet promotional expenses, fixed and working capital needs. The requirement of fixed assets is related to the type of industry. A manufacturing concern will require more investments in fixed assets than a trading concern. The working capital needs depend upon the scale of operations, larger the scale of operations, the higher will be the needs for working capital. A wrong assessment of financial needs may jeopardies the survival of a concern.
  12. 12.  Selecting the Sources of Funds: A number of sources may be available for raising funds. A concern may resort to issue of share capital and debentures. Financial institutions may be requested to provide long- term funds. The working capital needs may be met by getting cash credit or overdraft facilities from commercial banks. A finance manager has to be very careful and cautious in approaching different sources. The terms and conditions of banks may not be favourable to the concern. A small concern may find difficulties in raising funds for want of adequate securities or due to its reputation. The selection of a suitable source of funds will influence the profitability of the concern. This selection should be made with great caution.  Financial Analysis and Interpretation: The analysis and interpretation of financial statements is an important task of a finance manager. He is expected to know about the profitability, liquidity position, short-term and long-term financial position of the concern. For this purpose, a number of ratios have to be calculated. The interpretation of various ratios is also essential to reach certain conclusions. Financial analysis and interpretation has become an important area of financial management.
  13. 13. Cost-Volume-Profit Analysis: Cost-volume-profit analysis is an important tool of profit planning. It answers questions like, what is the behaviour of cost and volume? At what point of production a firm will be able to recover its costs? How much a firm should produce to earn a desired profit? To understand cost-volume-profit relationship, one should know the behaviour of costs. The costs may be subdivided as: fixed costs, variable costs and semi-variable costs. Fixed costs remain constant irrespective of changes in production.  An increase or decrease in volume of production will not influence fixed costs. Variable costs, on the other hand, vary in direct proportion to change in production. Semi-variable costs remain constant for a period and then become variable for a short period. These costs change with the change in output but not in the same proportion.  The first concern of a finance manager will be to recover all costs. He will aspire to achieve break-even point at the earliest. It is a point of no- profit no-loss. Any production beyond break-even point will bring profits to the concern. The volume of sales, to earn a desired profit, can also be ascertained. This analysis is very helpful in deciding the volume of output or sales. The knowledge of cost-volume profit analysis is essential for taking important decisions about production and profits.
  14. 14.  Working Capital Management:  Working capital is the life blood and nerve centre of a business. Just as circulation of blood is essential in the human body for maintaining life, working capital is essential to maintain the smooth running of business. No business can run successfully without an adequate amount of working capital. Working capital refers to that part of the firm’s capital which is required for financing short-term or current assets such as cash, receivables and inventories. It is essential to maintain a proper level of these assets. Finance manager is required to determine the quantum of such assets. Cash is required to meet day-to-day needs and purchase inventories etc.  The scarcity of cash may adversely affect the reputation of a concern. The receivables management is related to the volume of production and sales. For increasing sales, there may be a need to give more credit facilities. Though sales may go up but the risk of bad debts and cost involved in it may have to be weighed against the benefits. Inventory control is also an important factor in working capital management. The inadequacy of inventory may cause delays or stoppages of work. Excess inventory, on the other hand, may result in blocking of money in stocks, more costs in stock maintaining etc. Proper management of working capital is an important area of financial management.
  15. 15.  Profit Planning and Control: Profit planning and control is an important responsibility of the financial manager. Profit maximization is, generally, considered to be an important objective of a business. Profit is also used as a tool for evaluating the performance of management. Profit is determined by the volume of revenue and expenditure. Revenue may accrue from sales, investments in outside securities or income from other sources. The expenditures may include manufacturing costs, trading expenses, office and administrative expenses, selling and distribution expenses and financial costs.  The excess of revenue over expenditure determines the amount of profit. Profit planning and control directly influence the declaration of dividend creation of surpluses, taxation etc. Break even analysis and cost-volume profit relationship are some of the tools used in profit planning and control.  Dividend Policy: Dividend is the reward of the shareholders for investments made by them in the shares of the company. The investors are interested in earning the maximum return on their investments whereas management wants to retain profits for further financing. These contradictory aims will have to be reconciled and in the interests of shareholders and the company. The company should distribute a reasonable amount as dividends to its members and retain the rest for its growth and survival.  A dividend policy is influenced by number of factors such as magnitude and trend of earnings, desire and type of shareholders, future requirements of the company, government’s economic policy, taxation policy, etc. Dividend policy is an important area of financial management because the interests of the shareholders and the needs of the company are directly related to it. 
  16. 16. Production Possibility curves  A graphical representation of the alternative combinations of the amounts of two goods or services that an economy can produce by transferring resources from one good or service to the other. This curve helps in determining what quantity of a nonessential good or a service an economy can afford to produce without jeopardizing the required production of an essential good or service. Also called transformation curve.  As indicated on the chart above, points A, B and C represent the points at which production of Good A and Good B is most efficient. Point X demonstrates the point at which resources are not being used efficiently in the production of both goods; point Y demonstrates an output that is not attainable with the given inputs.  Let us take an imaginary example, a society can produce either 15000 butter or 5000 guns with given resources or technology. In between these two extreme possibilities, there are many possibilities like A, B,C, D, E & F as shown in the following table.
  17. 17. Possibilities Guns Butter A 0 15000 B 1000 14000 C 2000 12000 D 3000 9000 E 4000 5000 F 5000 0 As shown in the above table if all the resources and given technology are used for the production of guns there would be no butter. Similarly, if all resources and given technology are used for the production of butter there is zero production of guns. In between A and F possibilities, there are B, C, D and E possibilities which represent some butter and some units of gun. These possibilities are represented by Production Possibility Frontier (PPF). According to Paul A. Samuelson, "The Production Possibility Frontier shows the maximum amount of production that can be obtained by the economy, given, its technological knowledge and quantity of inputs available" PPF represents the maximum of goods and services available to the society " The PPF can be represented in the following diagram
  18. 18. The Production Possibility Frontier Curve As shown in the above figure, society has to decide which combination of guns and butter has to be produced with given resources and technology. There is maximum limitation to the amounts of butter and guns that can be produced with given resources and technology in a country. The increase in the production of guns requires a reduction in the production of butter. This explains that society has to reduce the production of one commodity in order to increase the production of other commodity. In this case, we assume that society can produce only two commodities. In our example, they are butter and guns. It explains that butter can be transformed into guns or guns into butter. In other words land, labour and machine used for butter can be transformed for the production of gun. Thus, the production of one commodity can be transformed into production of another commodity. The production possibility curve is also known as Transformation Curve.
  19. 19. Chapter 2  MACRO ECONOMICS: AN OVER VIEW
  20. 20. DEVELOPMENT OF MACROECONOMICS SCHOOL OF VIEW  The field of macroeconomics is organized into many different schools of thought, with differing views on how the markets and their participants operate.  Classical  Keynesian  Post kenesian
  21. 21.  Classical: Classical economists hold that prices, wages and rates are flexible and markets always clear. As there is no unemployment, growth depends upon the supply of production factors. (Other economists built on Smith's work to solidify classical economic theory.  Keynesian: Keynesian economics was largely founded on the basis of the works of John Maynard Keynes. Keynesians focus on aggregate demand as the principal factor in issues like unemployment and the business cycle. Keynesian economists believe that the business cycle can be managed by active government intervention through fiscal policy (spending more in recessions to stimulate demand) and monetary policy (stimulating demand with lower rates). Keynesian economists also believe that there are certain rigidities in the system, particularly "sticky" wages and prices that prevent the proper clearing of supply and demand.  Monetarist: The Monetarist school is largely credited to the works of Milton Friedman. Monetarist economists believe that the role of government is to control inflation by controlling the money supply. Monetarists believe that markets are typically clear and that participants have rational expectations. Monetarists reject the Keynesian notion that governments can "manage" demand and that attempts to do so are destabilizing and likely to lead to inflation
  22. 22.  New Keynesian: The New Keynesian school attempts to add microeconomic foundations to traditional Keynesian economic theories. While New Keynesians do accept that households and firms operate on the basis of rational expectations, they still maintain that there are a variety of market failures, including sticky prices and wages. Because of this "stickiness", the government can improve macroeconomic conditions through fiscal and monetary policy.  Neoclassical: Neoclassical economics assumes that people have rational expectations and strive to maximize their utility. This school presumes that people act independently on the basis of all the information they can attain. The idea of marginalism and maximizing marginal utility is attributed to the neoclassical school, as well as the notion that economic agents act on the basis of rational expectations. Since neoclassical economists believe the market is always in equilibrium, macroeconomics focuses on the growth of supply factors and the influence of money supply on price levels.  New Classical: The New Classical school is built largely on the Neoclassical school. The New Classical school emphasizes the importance of microeconomics and models based on that behavior. New Classical economists assume that all agents try to maximize their utility and have rational expectations. They also believe that the market clears at all times. New Classical economists believe that unemployment is largely voluntary and that discretionary fiscal policy is destabilizing, while inflation can be controlled with monetary policy.  Austrian: The Austrian school is an older school of economics that is seeing some resurgence in popularity. Austrian school economists believe that human behavior is too idiosyncratic to model accurately with mathematics and that minimal government intervention is best. The Austrian school has contributed useful theories and explanations on the business cycle, implications of capital intensity, and the importance of time and opportunity costs in determining consumption and value.
  23. 23. The goal of macro economic policy  Stable and sustainable economic growth and development: For advanced economies, stable and sustainable development means the desire to see national income grow in real terms in a way that can be sustained in the future, without generating other significant economic problems. For developing economies, further development is often the primary goal, and can be summarised as the desire to increase the longevity of the population, increase access to education, and attain a decent standard of living.  Stable prices: Stable prices mean average prices rising by only a small amount, such as 2% per year.  Full employment: Full employment occurs when the labour force is fully employed in productive work.  A balance of payments with the rest of the world: This means that a country is able to ‘pay its way’ in the world.  Care for the environment: Care for the environment means protecting the environment from misuse and overuse. The environment is increasingly recognised as an important asset that needs to be protected. 
  24. 24.  An equitable (fair) distribution of income: An equitable distribution of income means that the gap between rich and poor is not excessive, but still enough to create incentives to work. Not all economists agree about the order of priority for achieving these objectives. Nor do they agree about which specific instrument should be used to achieve a given objective.  A sound structure to public finances: In terms of the role of the public sector, Keynes argued that more government spending could adequately compensate for lower private consumer and capital spending. In short, if an economy was in recession, it did not matter who injected the money - the public sector was just as productive as the private sector. However, as public (sovereign) debt has spiraled over the last decade, the control and reduction of debt levels has become a major policy objective.
  25. 25. RELATIONSHIP WITH 8 VARIANTS OF NATIONAL PRODUCT AGGREGATES  We have shown the distinction between national product at market prices and national product at factor cost, based on whether or not net indirect taxes have been included. And there is also a distinction between gross or net national product according to whether investment is inclusive of capital consumption or not. Further, a distinction has been drawn between domestic and national product, according to whether we are measuring net factor income from abroad (i.e. the net return on factors owned by nationals of the country concerned) or whether we are measuring what is produced within the domestic economy. This implies that there are eight possible combinations of national product aggregates, as shown below.  Gross Domestic Product (GDP) at market prices (MP) at factor cost (FC)  Gross National Product (GNP) at market prices (MP) at factor cost (FC)  Net Domestic Product (NDP) at market prices (MP) at factor cost (FC)  Net National Product (NNP) at market prices (MP) at factor cost (FC)
  26. 26. The way that these national product aggregates are related to each other can be understood from the figure
  27. 27.  We can sum up the differences between gross and net, market prices and factor cost and national and domestic concepts in the following way: Gross=Net + Depreciation  Market Prices=Factor Cost + [Indirect Taxes - Subsidies]  National=Domestic + Net Factor Income from Abroad  There are some national product aggregates that are more frequently met with and we have several ways of ordering them. One of these is as follows:  i. Gross domestic product at market price + net factor income from abroad equals  ii. Gross national product at market prices - net indirect taxes (indirect taxes - subsidies) equals  iii. Gross national product at factor cost - capital consumption (depreciation) equalsiv. Net national product at factor cost, which is popularly known as national income. 
  28. 28. PRICE INDEX  Percentage number that shows the extent to which a price (or a 'basket' of prices) has changed over a period (month, quarter, year) as compared with the price(s) in a certain year (base year) taken as a standard.
  29. 29. Difficulties faced in Estimating National Income  Six major difficulties faced in the measurement of national income are as follows: 1. problems of definition, 2. lack of adequate data, 3. non-availability of reliable information, 4. choice of method, 5. lack of differentiation in economic functioning, 6. double counting.  All the countries face some special difficulties in estimating national income. Some of these difficulties are given below:  (1) Problems of Definition: What should we include in the National Income? Ideally we should include all goods and services produced in the course of the year, but there are some services which are not calculated in terms of money, e.g., services of housewives.  (2) Lack of Adequate Data:The lack of adequate statistical data makes the task of estimation of national income more acute and difficult.  (3) Non-availability of Reliable Information: The reason of illiteracy, most producers has no idea of the quantity and value of their output and do not follow the practice of keeping regular accounts.  (4) Choice of Method: The selection of method while calculating National Income is also an important task. The wrong method leads to poor results.  (5) Lack of Differentiation in Economic Functioning: In all the countries the occupational specialization is still incomplete so that there is a lack of differentiation in economic functioning. An individual may receive income partly from farm ownership and partly from manual work in industry in the slack season.  (6) Double Counting: Double counting is also an important problem while calculating national income. If the value of all goods and services totaled, the total will overtake the national output, because some goods are currently consumed being used in the making of others. The best way to avoid this error is to calculate only the value of those goods and services that enter into final consumption.
  30. 30. uses of National Income Statistics  NI statistics may be analyzed and utilized for many reasons. These include comparing countries, making economic forecasts, to improve government or business policies and actions or to understand if an organization has been successful in reaching its macroeconomic goals.  One of the main uses of national income data is to recognize if a nation (government) has chosen the correct economic policies. Every single government on earth strives to achieve economic growth. Economic growth is defined as a country’s national income over time. Consequently government agencies and departments examine such data to comprehend if government aims have been reached. After the statistics have been analyzed the organization in question may choose to change policies or create new ones to stimulate economic growth if the objectives have not been achieved. However if the objectives have been accomplished, the government would normally also instigate changes to increase even more economic growth and expansion. For these changes, organizations utilize national income statistics for a different reason.
  31. 31.  To understand changes that need to be made, a government economic agencies use national income calculations to make predictions of the future, through analysis or graphs, data and diagrams. Economists recognize trends, which may be obvious or surreptitious. If these trends are positive, economists recommend that government policies are not modified. If not, economists often advise drastic changes to improve current outlooks towards the future.  Another use of national income statistics is as a basis to compare countries, either directly or by economic growth or living standards. Rising national incomes is often equated to rising living standards. This measures people’s general wellbeing and wealth. If two countries are compared, the nation with a higher value of national income is stated to be more developed and advanced, as its people enjoy better living standards.  Thus, one may observe that national income data may be utilized in many various ways to come to better understanding of the present or to create forecasts of the economic future and recognize trend, which may in time become reality.